Cleaning and Sealing Green Slate tiles in Hastings

I worked on this beautiful Green Slate tiled floor just before Christmas but I’ve been so busy with other jobs I’ve only just go around to writing about it. The slate floor was installed in the hallway and kitchen of a property in the seaside town of Hastings and the owner was keen to have the work done before the holidays.

Green Slate Tiled Floor Before Cleaning Hastings Green Slate Tiled Floor Before Cleaning Hastings

I had been to the property previously to survey the floor and quote for doing the work. It was clear that much of the sealer that had previously protected the slate from ingrained dirt had worn off and much of the floor had now lost is appearance. The solution would be to strip off what was left of the sealer, deep clean the stone to remove ingrained dirt and then apply a fresh sealer. The work should take two days to complete and fortunately for the client I was able to fit them in, December is after all one of our busiest periods.

Cleaning a Green Slate Tiled Floor in Hastings

After taping up the skirting boards to protect them during the cleaning process I sprayed the floor with Tile Doctor Remove and Go. Remove and Go is a cleaner and coatings remover that’s safe to use on Tile and Stone and is ideal for removing sealers. It’s important to remove all the old sealer from the floor as it may not be compatible with the new sealer and can result in an uneven appearance later.

Green Slate Tiled Floor Before Cleaning Hastings Green Slate Tiled Floor During Cleaning Hastings

The Remove and Go was left to soak into the Slate for about ten minutes before being worked into the floor using a rotary machine fitted with a black scrubbing pad. I also like to use stiff hand brush along the grout lines and to get into those hard to reach areas. The soil generated was extracted using a van mounted high pressure cleaning system that simultaneously rinses the floor and vacuum’s the soil away to a recovery tank.

The Green Slate was installed in several different areas on the ground floor of the property, so it made sense to do the work one section at a time and then inspect all the floors at the end. Any stubborn stains were spot cleaned by hand using more Remove and Go until I was satisfied.

Sealing Green Slate Floor Tiles in Hastings

I left the floor to dry off overnight and came back the next day to seal it, unfortunately moisture readings indicated more drying time was required. I was working on another stone floor the following week, so I agreed with the owner to come back on Saturday and seal the floor then.

Green Slate Tiled Floor After Cleaning Hastings Green Slate Tiled Floor After Cleaning Hastings

The sealer I used was Tile Doctor Seal and Go which is highly recommended for Slate and will provide good stain protection whilst improving the appearance of the stone to give a low sheen finish. Slate is quite a porous stone, so it took five coats before it was fully sealed. I think you will agree the Green Slate floor looks transformed and I’m sure was appreciated by their guests over Christmas.

Green Slate Tiled Floor After Cleaning Sealing Hastings

 

Professional Renovation of a Green Slate Floor in Hastings, East Sussex

Source link

Renovating Dirty Travertine Kitchen Tiles in Coningsby

A customer from the village of Coningsby was having trouble keeping their Travertine tiled Kitchen floor clean. Another company had sealed the flooring previously, but it clearly hadn’t lasted and dirt had now become ingrained in the pores of the stone. As a result, mopping the floor wasn’t effective at removing the dirt from either the Travertine or the grout lines.

This was a busy work kitchen that needed to have a floor that is easy to maintain; now frustrated with the way the floor looked they considered having it taken up and replaced but decided to contact Tile Doctor first looking for a remedy.

Travertine Floor Coningsby Before Cleaning Travertine Floor Coningsby Before Cleaning

We visited the property to survey the floor and discuss the issues they were facing with the floor. It clearly needed to be deep cleaned and then resealed properly with a more effective product. I explained our process and discussed the result they were looking for. They were happy for me to go ahead and requested a Matt finish rather than a shine or gloss look as it was a high use kitchen.

Cleaning and Burnishing a Travertine Tiled Floor

I returned on the agreed date and spent the first day removing the old sealer that was no longer working and deep cleaning the flooring. To achieve this, I used a series for burnishing pads of different grits. After each pad the floor was rinsed using our Rotovac system which rinses the floor and extracts the dirty water off the floor at high speed. Although an expensive investment the machine makes light work of cleaning hard floors and saves a lot of time.

Travertine Floor Coningsby During Cleaning

After cleaning the floor, a turbo dryer was installed to speed up the drying process so the floor can be inspected, and any stubborn areas redone. The tiles looked nice and clean, but I could see some areas of grouting needed more work so these were hand scrubbed with Tile Doctor Pro-Clean followed by another rinse to remove the soil.

Travertine Floor Coningsby During Cleaning Travertine Floor Coningsby Floor Drying After Cleaning

At this stage I also noticed a few holes in the travertine that were filled for the customer with a matching colour. This is a common problem for Travertine and unfortunately, they easily attract dirt, so filling makes the floor much easier to clean going forward.

Sealing a Travertine Tiled Floor

We returned the following morning and tested the flooring with a damp meter to make sure it was fully dry. All was well and it was ready to seal with our quality impregnator Tile Doctor Colour Grow which protects the floor from within whilst enhancing the natural colours in the stone in the process. The Travertine proved more absorbent than usual for this type of stone and took three coats before a water test indicated the floor was fully sealed.

Travertine Floor Coningsby After Sealing Water Test

You can see from the photo above that the water beaded up on the surface and can be simply wiped away even after a few minutes. This shows maximum protection has been applied. Given my experience with this floor I suspect the previous company had not applied enough sealer and this would explain why it failed, had they conducted a water test then this should have been obvious.

We then gave a final polish with our buffer and a white soft pad to really strengthen the seal and give the best finish. I should mention that Colour Grow leaves a matt finish which matches the customer’s request.

Travertine Floor Coningsby After Cleaning Travertine Floor Coningsby After Cleaning

For aftercare cleaning going forward I left the customer a complimentary bottle of Tile Doctor Neutral Tile Cleaner that looks after the seal better than any high alkaline or acidic cleaners like bleach or washing up liquid which will prematurely erode the seal.

The customer was delighted with the results, commenting on how much brighter the whole room looked.

Travertine Floor Coningsby After Cleaning

 

Professional Tile Cleaning, Burnishing and Sealing for a Travertine Tiled Kitchen Floor in Sleaford

Source link

Dull Slate Tiled Floor Stripped and Re-Sealed in Moseley

A client contacted me regarding their slate tiled floor which had only been down a few years and was now looking dull and uninviting. The slate tiles were laid in a herringbone pattern and Interestingly they had only been cleaned and sealed about a year ago by another company, but it has soon started to look dull again. Naturally my client was disappointed with the result, especially considering how new the floor was.

Slate Floor Before Cleaning Moseley

The property was in the Birmingham suburb of Moseley and as per usual I paid them a visit to survey the floor and conduct a test clean. From what I could see the sealer the previous company had used was already failing and wearing off, this left the stone vulnerable allowing dirt to become ingrained in the stone. We discussed the overall procedure and I completed a test clean on part of the floor which went well so the customer was happy to proceed. Whilst I was there, we also discussed the effects of different sealers I would recommend for the tiles so they could select one that would give them the look they wanted.

Slate Floor Before Cleaning Moseley Slate Floor Before Cleaning Moseley

Cleaning a Slate Tiled Kitchen Floor

On the first day I applied a strong solution of Tile Doctor Pro-Clean combined with Tile Doctor Remove and Go, this was left to dwell on the slate while I cleaned up the grout with a stiff grout brush. I used this combination of products to ensure I stripped any coatings that may have been applied to the floor by the previous company and the original installer. With the grout scrubbed I turned my attention to the Slate tiles by scrubbing them with a black pad fitted to a weighted rotary buffer machine. The floor was then rinsed thoroughly, and the now soiled cleaning solution extracted with a wet vacuum.

Slate Floor During Cleaning Moseley

The kitchen area was quite large, so I did the clearing in three section inspecting each section afterwards before moving onto the next. There were some areas where the existing sealer was proving stubborn to remove which were re-treated until clean. I discussed this with the customer who explained that the previous company had left a tin of sealer and advised them that they should clean the floor and then apply more sealer. This meant every time they did, they were adding another coat of seal and if the cleaning was not effective it would result in trapping dirt under the sealer! After spending most of the day cleaning, it was agreed to let the floor dry out and see how it looked next day.

When I returned on the second day, I could see there were still traces of sealer on some areas of stone and grout, so I decided to clean the floor again with more Pro-Clean but this time working in in with an abrasive 400-grit burnishing pad. This did the trick on the slate, but the grout needed a handheld diamond block to remove the seal. The whole floor was then rinsed and allowed to dry.

Sealing a Slate Tiled Kitchen Floor

Although previously we had discussed the different options for sealing the client wasn’t sure which one to choose. To help them decide I dried some of the tiles with a heat gun and applied different sealers to they could see the different between the matt and sheen finishes. The client decided on Tile Doctor Seal & Go Extra which helps bring the colour out in the tiles, it’s also breathable and has a nice sheen to it but slightly less so than Tile Doctor Seal & Go. I applied four coats as soon as the floor had dried.

Slate Floor After Sealing Moseley

I left the client with a bottle of Tile Doctor Neutral Tile Cleaner to help maintain the tiles appearance. The client was very happy with the results, thanked me for my hard work and commented that the floor looked better than the day it went down.

Slate Floor After Sealing Moseley

 

Professional Restoration of a Slate Tiled Floor in Birmingham

Source link

New Black Limestone Floor Issues Resolved in Godalming

A property developer contacted me looking for a solution to two problems with a Black Limestone floor he had installed in the kitchen of a house in Godalming. The first problem was the sealer used didn’t do anything to enhance the look of the Limestone tiles and the new owner was very unhappy with their appearance which was now light in colour as opposed to the black Limestone he was expecting. Secondly the kitchen fitter had dragged a wooden box with a rogue screw hanging from the bottom across the floor in several places leading to scratches.

Scratched Black Limestone Floor Before Godalming

With direct trains to London Waterloo taking 45 minutes Godalming is a very desirable place to live and a property hotspot. Fortunately for the developer I was able to advise that both problems were fixable. Firstly, I had to remover the existing sealer, tackle the scratches and then re-seal and polish. Keen to have the problem resolved I was instructed to go ahead with the work.

Scratched Black Limestone Floor Before Godalming

Removing Sealer and Scratches from Black Limestone tiles

The old sealer was not doing anything to enhance the look of the Black Limestone and simply applying a new sealer on-top of the old would not have improved the appearance, so it had to be stripped off first. To remove the old sealer, I attached a coarse 400-grit Diamond burnishing pad to a floor buffer and ran it over tiles with water for lubrication. The process generates a fine slurry so once the whole floor had been burnished in this way the slurry was rinsed off with more water and then extracted using a wet vacuum.

Next, using a small handheld burnishing block I very carefully removed the scratches that the kitchen fitter had caused. Like the burnishing pads these blocks come in different grades and are encrusted with industrial diamonds.

Once happy I was happy that the scratches were gone, I continued to burnish the floor using a medium 800-grit and then a fine 1500-grit pad. These pads are used to hone the stone and build-up its polished appearance. As with the 400-grit pad water is used to lubricate the process and the floor is rinsed and extracted after each pad.

Sealing Black Limestone Tiles

I left the floor to dry off and returned after the weekend to apply the sealer. This is essential for any stone floor as otherwise dirt will become trapped in its pores making it difficult to clean effectively. Sealers can also enhance the appearance of the stone and in this case, we wanted to really bring out its natural dark colour. With this in mind I chose Tile Doctor Colour Grow which is an impregnating sealer that protects from within and includes a colour enhancing agent that improves colour and, in this case, considerably intensified the black colour of the stone to achieve the effect the customer wanted.

Scratched Black Limestone Floor After Burnishing Godalming

Before leaving I ran over the floor with a white buffing pad to add an extra lustre to the stone, by the time I had finished the floor looked amazing. Unfortunately, I never got to hear how the customer felt about the new appearance of their Black Limestone floor however the property developer was much relieved as he thought the whole floor might need to be replaced.

 

Professional Limestone Floor Renovation in West Surrey

Source link

Sandstone Tiled Kitchen Floor Renovated in Mapplewell, Barnsley

[ad_1]

We were contacted by a family in the Barnsley area of South Yorkshire who were tearing their hair out trying to keep their Sandstone Tiled floor clean. The kitchen area was especially grubby and once the island had been removed during recent renovations, the dirty floor really stood out.

The house was located on the Northern tip of Barnsley in Mapplewell, close to the border of South and West Yorkshire, an area which is steeped in coal mining history. Even though all the coal mines have gone there’s still lots of evidence of its’ proud mining history in the area.

Sandstone Tiled Floor Before Renovation in Mapplewell

After inspecting the tiles, I could see their problem revolved around the fact that the Sandstone had a texture to it and the previous sealer used was an impregnating sealer, as a result the dirt had no problem sticking to the stone as you can see from the picture. At Tile Doctor we see Sandstone/flagstones used a lot as Kitchen flooring, it is a popular choice due to it being so hardwearing, however as with any natural stone it needs to be sealed to protect it and bring out its beauty and colour.

I demonstrated the cleaning process on a small part of the floor, which they were very satisfied with. The testing also enables me to understand what it would take to renovate the whole floor and provide them with an accurate price. They were happy with my proposal and keen for me to begin the work which would take two days to complete, one day to clean the floor and returning a further day to complete the sealing of the floor.

Cleaning a Sandstone Tiled Kitchen Floor

On arrival at the agreed date I set about preparing the working area by removing the kickboards and protecting other surfaces that might come into contact with the cleaning products and equipment.

My process for cleaning the floor was to spray the floor first with a strong dilution of Tile Doctor Remove and Go which was left to soak into the stone for ten minutes so it could breakdown old sealers and dirt. The solution was then scrubbed into the stone using a rotary floor buffer fitted with a 400-grit diamond encrusted burnishing pad. It didn’t take long for solution to turn grey with the soil that was released from the floor and the true beauty of the Sandstone started to appear. The dirty slurry was extracted with a wet vacuum and the floor given a thorough inspection. Stubborn stains were spot-treated using the same process and once I was satisfied the floor was given a thorough rinse to remove any trace of cleaning product and dirt. The floor was dried as much as possible with the wet vacuum and then assisted with fans left to dry off fully overnight. It was clear to me at this stage that the floor was already showing significant improvement.

Sandstone Tiled Kitchen Floor After Cleaning in Mapplewell

Sealing a Sandstone Tiled Kitchen Floor

The next day I tested the stone for moisture using a damp meter to ensure it was dry before sealing. It confirmed that the floor had dried overnight and would be able to start applying the sealer.

It was already clear that an impregnating sealer was not the best choice for a textured stone so a topical sealer would be the best option, not only does it bring out the colours of the stone it also adds a barrier between the fine pores of the stone and dirt. Six coats of Tile Doctors Seal & Go were applied to ensure the stone was fully sealed, which took some time as you have to wait for the first coat to dry before applying the next. Seal and Go is a water based acrylic satin sealer which is perfect for this type of floor. It gives a nice natural finish but allows the natural colour and beauty of the floor to shine through.

Sandstone Tiled Floor During Sealing in Mapplewell

The sandstone now looks much lighter and cleaner, certainly my client was very happy with the transformation of the floor, especially where the island had been. In fact, we have agreed with the customer we will return every year to maintain the floor to keep it looking in perfect condition. In the meantime, they should be able to easily keep it clean using Tile Doctor Neutral Tile Cleaner which is designed for the regular cleaning for sealed floors like this.

Sandstone Tiled Floor After Renovation in Mapplewell

 

Professional Restoration of a Sandstone Tiled Floor in South Yorkshire

[ad_2]

Source link

Quarry Tiled Lounge Floor Renovated in Outwood

[ad_1]

This client who lived in a property in the Village of Outwood had a tired looking Quarry tiled floor in their lounge and asked if we could improve the look of it. I went over to take a look and can see the tiles were situated in front of a brick fireplace and added a nice rustic feel to the room that was well suited to the house.

Quarry Tiled Floor Before Renovation in Outwood Quarry Tiled Floor Before Renovation in Outwood

It had clearly been some time however since the Quarry tiles had been given a good clean and seal; the tiles were looking dull and lifeless and the grout was especially bad and had darkened with the ingrained dirt. I could see a deep clean would be required to lift the dirt out so after discussing the process we agreed a date for me to come back and renovate the floor.

Quarry Tiled Floor Before Renovation in Outwood Close Up

Deep Cleaning Quarry Tile and Grout

When I returned to clean the floor my first task was to protect any areas that may be impacted by the cleaning process which in this case related to the adjacent carpet.

To be able to reach into the pores of the tile and grout and lift out the dirt I needed to remove any remaining sealer. To do this I applied a medium dilution of Tile Doctor Remove and Go which is a strong coatings remover and cleaner that’s ideal for these situations. The product is left to dwell for ten minutes, so it can get to work breaking down the old sealer and dirt and is then scrubbed into the floor. Normally I use a black scrubbing pad fitted to a rotary machine running on slow speed to do this however given the size of the floor I decided to use a deck brush to scrub the tiles and a narrow grout brush along the grout lines.

The soiled cleaning solution was rinsed off the floor with water and extracted using a wet vacuum. I then inspected the floor and spot treated any areas that needed further attention with a repeat of the same process. Once I was satisfied the Quarry tile and grout was as clean as it could be, I left for the night so the floor cold dry off.

Sealing Quarry Tiles

Returning the next day, I sealed the Quarry tiles with several coats of Tile Doctor Seal and Go which adds a nice subtle sheen finish to the tiles and will provide the tiles with long lasting protection. Seal and Go is a water-based sealer so doesn’t leave a smell as it dries which is always a plus.

My client was impressed with the transformation and as I think you will agree the Quarry tiles now look much brighter and the grout has returned to a much lighter shade.

Quarry Tiled Floor After Renovation in Outwood Quarry Tiled Floor After Renovation in Outwood

 

Professional Renovation of a Quarry Tiled Floor in Surrey

[ad_2]

Source link

Victorian Quarry Tiled Floor Fully Restored in Nether Edge, Sheffield

[ad_1]

We were called to this beautiful Victorian house in Nether Edge, Sheffield. The house sits on a tree lined street full of big Victorian homes and dates back to 1898. The current owners were keen to preserve the properties old charm and character and had made quite a few improvements sympathetic to the age of the property. They had begun by removing some tasteless ceramic tiles that had been installed sometime in the 1990’s and were shocked when the original quarry tiled floor was uncovered buried beneath two layers of tile adhesive and a layer of bitumen! They gave us a call and asked us to come and have a look and see if we could restore the floor.

Quarry Tiled Floor Sheffield Before Restoration

I went to the property and as they had described the floor was in need of some help.
After several test cleans we came to the conclusion that all the damage was repairable, and the floor was able to be rescued. I offered them a quote to complete this restoration work which they gladly accepted. Due to the nature of the work involved the job would take four days to complete.

Quarry Tiled Floor Sheffield Before Restoration

The client was also having their kitchen re fitted, so we discussed that we could use some of the original tiles that were going to be covered by a new island by lifting them up and storing them until we needed them to patch the holes up and replace the cracked tiles. The owners also managed to source some reclaimed tiles which were also a perfect match.

Quarry Tiled Floor Sheffield Before Restoration

Cleaning and Restoring a Quarry Tiled Kitchen Floor

We began by removing the old adhesives and bitumen with a combination of Tile Doctor Grout Clean-up with Pro-Clean and assisted with steam, a heat gun and good old-fashioned elbow grease. It was painstaking work but after 2 days we had uncovered the floor.

Quarry Tiled Floor Sheffield During Restoration Day 2 After Steam Cleaning

There were areas of damage, areas with no tiles, patches of loose tiles and areas where tiles had never been, like the two doorways which weren’t original, so tiles were never placed there. We used the rescued tiles and the reclaimed tiles to repair these areas, once the tiles were in you wouldn’t have known any damage had existed. There were many areas of missing grout, so we installed new grout and gave the floor one last wash. As you can see from all the pictures there was a lot to do.

Quarry Tiled Floor Sheffield During Restoration Day 3 Removing More Damaged Tiles

Sealing a Quarry Tiled Kitchen Floor

Once the floor had dried completely we returned to seal the floor, we applied one coat of Tile Doctor Colour Grow, a colour enhancing impregnating sealer which we left to soak in and cure. Then we applied 5 coats of a satin breathable sealer Tile Doctor Seal & Go Extra leaving the floor with a beautiful natural finish.

Quarry Tiled Floor Sheffield During Restoration Day 4 Applying Colour Grow

It was a long job that took four days to completed but the transformation we achieved was well worth the effort. Our clients certainly thought so and were over the moon that an original and unknown part of their house was now restored back to its’ former glory and will hopefully last another 120 years. They even left the following comment on the Tile Doctor feedback system.

”We found a layer of quarry tiles under our kitchen floor – covered in bitumen and tile adhesive. After four days of cleaning, patching gaps & replacing cracked quarry tiles we have a shiny, characterful and ‘new Victorian floor!”

Quarry Tiled Floor Sheffield During Restoration Day 4 After Sealing

 

Professional Restoration of a Quarry Tiled Kitchen in South Yorkshire

[ad_2]

Source link

Neglected Tumbled Travertine Floor Renovated in Saffron Walden

[ad_1]

We recently visited a property in Saffron Walden, a pretty market town in Essex, where the owner asked us to look at her Tumbled Travertine kitchen floor. The floor had been laid and sealed around 10 years prior and the pits in the Travertine had become very dirty with trapped dirt, the floor now had a grubby neglected look about it. No matter how much they tried to clean with a multitude of household cleaners, the floor had become worse and worse which is not unusual as strong chemicals can strip off the sealer completely which protects the floor.

Tumbled Travertine Before Cleaning Saffron Walden Tumbled Travertine Before Cleaning Saffron Walden

It was clear that the original sealer was no longer doing its job and so I discussed the options for renovating the floor whilst carrying out a test clean. Sealers rarely last ten years, in my experience three years is about the maximum you can expect regardless of manufacturers claims. The test clean went well and we agreed a price and a timescale for the work and scheduled it for the following week.

Cleaning a Tumbled Travertine Tiled Kitchen Floor

It’s not a good idea to apply a different sealer on top of the original unless you know they are compatible, also you can end up with uneven layers so our first step was to strip off any remaining sealer and clean the floor. To do this we used Tile Doctor Remove and Go which is designed for the removal of coatings on tiles such as sealers, adhesives and paints. This product is also great for drawing out ingrained stains and removing heavy grease build-up. It can be used on both vertical and horizontal surfaces. We applied and let it soak into the pores of the Travertine for ten minutes before working it in.

To work the product into the stone and get deep into the pits a coarse 200-grit burnishing pad fitted to a rotary buffing machine was run over the floor and lubricated with plenty of water. After than the floor was rinsed with water and the slurry extracted with a wet vacuum. With the floor clean the process was repeated with finer grades of pads from 800-grit through to 1500-grit. As before between pad the floor was rinsed thoroughly to remove any trace of slurry off the tiles and the slurry extracted with the wet vacuum; the more thorough the rinse the better the finish. By the end of day one the cleaning process was completed, stripped of any coatings and the floor looked much better and lighter in appearance which made the room seem bigger.

Sealing a Tumbled Travertine Tiled Kitchen Floor

The Travertine tiles were left to dry off fully overnight and I started on the second day with a floor inspection to ensure the floor was ready for sealing. At that point I could see that there were a few small areas that needed further attention, so I spot treated them with Hand Burnishing Block. This was followed by spray-burnishing the floor with a very fine 3000-grit polishing pad which is applied using a little water sprayed on to the Travertine. This very fine pad left the floor with a natural looking sheen.

Once we completed this and were satisfied with the finish, all that remained was the sealing of the floor, this will protect it and prevent the dirt from impregnating the pores in the stone. Three coats of Tile Doctor Colour Grow were applied, leaving thirty minutes drying time between each coat. Colour Grow is an impregnating and colour enhancing sealer which leaves the floor resistant to staining and spills whilst improving the natural brown shades in the Travertine resulting in a lovely finish.

The client was very satisfied with the finish, the whole room had been lifted, looking much lighter and brighter.

Tumbled Travertine After Cleaning Saffron Walden Tumbled Travertine After Cleaning Saffron Walden

 

Professional Restoration of Tumbled Travertine Tiled Kitchen in North Essex

[ad_2]

Source link

Restoring a Carpet Covered Terracotta Tiled Floor in Appleton

[ad_1]

I was contacted by a home owner in Appleton near Warrington who had a Terracotta tiled floor in their dining Room. The floor had previously been covered in carpet and they were keen to have the whole floor restored.

To complicate things further the Carpet had been stuck down with a strong adhesive and a local builder had advised them to remove the glue using brick acid. Although this was successful it had the side effect of discolouring the grout lines and no amount of rinsing with the floor with water to dilute and wash off the acid would resolve the problem.

Carpet Covered Terracotta Tiled Floor Before Restortion in Appleton

Happy for me to resolve the problem, my client informed me they were going on holiday and would like me to do the work whilst they were away. This was a great idea as it would guard against unwanted foot traffic during the cleaning and sealing process and it would also mean they would have a nice surprise waiting for them on their return.

Deep Cleaning a Terracotta Tiled Kitchen Floor

After protecting the Kitchen units and skirting boards with plastic sheeting my first job was to strip any remaining sealer off the Terracotta tiles using a strong dilution of Tile Doctor Pro-Clean. The solution was spread across the floor and then left to dwell for twenty minutes before scrubbing it in with a black scrubbing pad attached to a rotary floor buffer. I then used a wet vacuum to remove the now dirty cleaning solution from the floor.

The grout was also given a good scrub using more Tile Doctor Pro-Clean but this time it was scrubbed in with a narrow stiff brush until I was satisfied it was as clean as it could be. The floor given a good rinse and I then inspected the floor tile and grout to ensure it was clean and free of sealers, any areas that needed ore work were retreated and the floor given a final rinse and dry with the wet vacuum before being left to dry off fully overnight.

Sealing a Terracotta Tiled Kitchen Floor

I returned the next morning and tested the tiles with a damp meter to ensure they were dry before beginning applying the sealer. All was well, so I started by applying a single coat of Tile Doctor Colour Grow. Colour Grow is an impregnating sealer that seeps into the pores of the tile protecting it from within and enhancing the natural red colour of the Terracotta in the process.

Once the first coat had dried I followed up with two coats of Tile Doctor Seal and Go which is a compatible water-based sealer that works really well on clay tiles and adds a lovely sheen finish to the floor.

The last step was to resolve the problem with the discoloured grout lines by applying a white grout colourant to the grout. This gave the grout a fresh and consistent appearance throughout and also has the benefit of sealing the grout which will protect it from staining and also make it much easier to clean.

Last step was to finish the sealing of the floor by topping up the sealer with another three coats of Seal and Go to ensure the floor was fully sealed.

Carpet Covered Terracotta Tiled Floor Before Restortion in Appleton

The result was a huge improvement and now looked like a recently installed Terracotta floor. When my customer returned from holiday they were more than happy with the floor and the work I had done.
 
 

Restoring a Tired Terracotta Tiled Floor in Cheshire

[ad_2]

Source link