Dull Travertine Tiled Floor Deep Cleaned in Cobham

This client from Cobham had her kitchen and diner tiled with Travertine six years ago. With two children and three dogs living there, the sealer has gradually worn away leaving the stone exposed to dirt. The leafy village of Cobham lies in the borough of Elmbridge which is noted as being a one of the most desirable places to live in the UK. As a result, it attracts a lot of investment in property including expensive tiled floors.

I went over to survey the floor and discussed with the client how we could improve the floors appearance. The solution I proposed was to deep clean the tiles to extract all the dirt and remove what was left of the old sealer and then to re-seal the floor in order to protect it going forward. This process typically takes two days to complete; day one is spent cleaning the stone and grout, including the removal of the existing sealer and day two is spent sealing and polishing. The client was satisfied with the quotation and we arranged a time to come back and carry out the work.

Travertine Tiled Kitchen Diner Floor Before Cleaning Cobham

Cleaning a Travertine Tiled Kitchen Floor

Firstly, I asked the client to clear the floor and to help me put the dining table in the garden out of the way. Then using Tile Doctor Pro-Clean and a wire brush I cleaned the grout in the kitchen, diner and utility room. It was a large installation of Travertine, so this task took some time to complete. The floor was rinsed, and all the dirt produced was removed with a wet vacuum cleaner.

The next job was to remove what remained of the previous sealer and top layer of dirt. This was done with a rotating buffing machine with a set of diamond encrusted burnishing pads. The first one applied is a coarse 400-grit pad followed by 800 and 1500-grit, working through the pads in sequence. You might be familiar with the grit system from sandpaper, rough down to smooth. The process is lubricated with water and the slurry generated is rinsed off with water and extracted using a wet vacuum.
I left the floor to dry off overnight, they can walk on it during this time, but they needed to be careful of any spillages. The dogs were also welcomed back in from the front room.

Sealing a Travertine Tiled Kitchen Floor

The second day started with and inspection of the Travertine tile and grout looking for any areas that need further attention. I was satisfied that the floor was looking its’ best and once the preparation was complete, I applied the first coat of sealer.

On this occasion I went with Tile Doctor Ultra Seal which is doesn’t change the look of the stone giving a completely natural look. This product soaks into the pores of the stone protecting if from within and should last between three and five years depending on the amount of wear it received and how the floor is cleaned and maintained.

Two coats of sealer were applied and after each coat dried, I polished the floor using a very fine 3000-grit diamond pad. The pad is run across the Travertine dry with only a little water sprayed onto the tile using a process we call a ‘Spray Burnish’. I asked the client to keep off the travertine until it’s cured, usually for a couple of hours which is always a good excuse to go out for the evening!

Travertine Tiled Kitchen Diner Floor After Cleaning Cobham

The client was very happy the floor and they remarked it looked as good as when it was first laid. For aftercare I recommended using Tile Doctor Stone Soap which is ideal for the regular cleaning of sealed natural stone floors, many supermarket products are simply too harsh and will reduce the life of the sealer.

Travertine Tiled Kitchen Diner Floor After Cleaning Cobham

 

Professional Restoration of a Travertine Tiled Kitchen in West Surrey

Source link

New Black Limestone Floor Issues Resolved in Godalming

A property developer contacted me looking for a solution to two problems with a Black Limestone floor he had installed in the kitchen of a house in Godalming. The first problem was the sealer used didn’t do anything to enhance the look of the Limestone tiles and the new owner was very unhappy with their appearance which was now light in colour as opposed to the black Limestone he was expecting. Secondly the kitchen fitter had dragged a wooden box with a rogue screw hanging from the bottom across the floor in several places leading to scratches.

Scratched Black Limestone Floor Before Godalming

With direct trains to London Waterloo taking 45 minutes Godalming is a very desirable place to live and a property hotspot. Fortunately for the developer I was able to advise that both problems were fixable. Firstly, I had to remover the existing sealer, tackle the scratches and then re-seal and polish. Keen to have the problem resolved I was instructed to go ahead with the work.

Scratched Black Limestone Floor Before Godalming

Removing Sealer and Scratches from Black Limestone tiles

The old sealer was not doing anything to enhance the look of the Black Limestone and simply applying a new sealer on-top of the old would not have improved the appearance, so it had to be stripped off first. To remove the old sealer, I attached a coarse 400-grit Diamond burnishing pad to a floor buffer and ran it over tiles with water for lubrication. The process generates a fine slurry so once the whole floor had been burnished in this way the slurry was rinsed off with more water and then extracted using a wet vacuum.

Next, using a small handheld burnishing block I very carefully removed the scratches that the kitchen fitter had caused. Like the burnishing pads these blocks come in different grades and are encrusted with industrial diamonds.

Once happy I was happy that the scratches were gone, I continued to burnish the floor using a medium 800-grit and then a fine 1500-grit pad. These pads are used to hone the stone and build-up its polished appearance. As with the 400-grit pad water is used to lubricate the process and the floor is rinsed and extracted after each pad.

Sealing Black Limestone Tiles

I left the floor to dry off and returned after the weekend to apply the sealer. This is essential for any stone floor as otherwise dirt will become trapped in its pores making it difficult to clean effectively. Sealers can also enhance the appearance of the stone and in this case, we wanted to really bring out its natural dark colour. With this in mind I chose Tile Doctor Colour Grow which is an impregnating sealer that protects from within and includes a colour enhancing agent that improves colour and, in this case, considerably intensified the black colour of the stone to achieve the effect the customer wanted.

Scratched Black Limestone Floor After Burnishing Godalming

Before leaving I ran over the floor with a white buffing pad to add an extra lustre to the stone, by the time I had finished the floor looked amazing. Unfortunately, I never got to hear how the customer felt about the new appearance of their Black Limestone floor however the property developer was much relieved as he thought the whole floor might need to be replaced.

 

Professional Limestone Floor Renovation in West Surrey

Source link

Red and Brown Marble Tiled Kitchen Floor Polishing Weybridge

[ad_1]

If you have a Mable tiled floor which is not looking its best, then the transformation I achieved on this floor at a property in Weybridge will definitely be on interest. Having first spoken with the owner on the phone I went over to the house to take a better look at the floor and found that the deep red and brown Marble tiled kitchen floor was really dirty and totally lacking in colour or polish.

The floor hadn’t been professionally cleaned for some time and was now dirty and suffering from the actions of a puppy which likes to charge up and down. The Marble was also full of holes which the client explained had been getting larger. This is not usual for natural stone as it can be very sensitive to acidic cleaning products which if used constantly over time will start to dissolve the stone.

We discussed the remedies available, agreed a cost and arranged a mutually convenient time to carry the work out. I always like to do a site visit to survey the tiles and ideally run a test clean to determine the best methods for resolving the problems. This enabled me to give a more accurate quote and it also gives the customer confidence in my abilities.

Marble Tiled Floor Before Polishing Weybrige

Deep Cleaning Red and Brown Marble Kitchen Tiles

Firstly, I removed the existing sealer with a 400-grit diamond burnishing pad which is applied with water. Although this initially appears to make the floor look worse, this is only temporary, sometimes you have to make it look a little worse before it can get better! Once this was done the floor was rinsed with water to remove the slurry generated and this was then extracted off the floor with a wet vacuum.

Then for the next couple of hours I worked my way from the back door to the front filling all holes with a special expanding resin, then smoothing off as I went to ensure the smoothest of finish could be achieved. Some of the holes were indeed quite large, so there was quite a lot of work to do.

Once the filler had dried I started the polishing process using the 800 and then 1500 grit burnishing pads, once again with more water to lubricate and rinsing the floor in between polishing and removing the slurry as before. This process took much of the day, so I left the floor to dry off and came back the next day to complete the polishing and seal the Marble.

Sealing Red and Brown Marble Kitchen Tiles

The next day I returned and completed the polishing process by applying the fourth burnishing pad which is an extra fine 3000 grit pad, you apply the pad dry with only a little amount of water sprayed onto the floor in process we call a spay burnish and this final pad really brings up the polish in the Marble.

Once the polishing had finished I left the floor for a little while to make sure it was nice and dry and then I applied two coats of Tile Doctor Colour Grow sealer. This is a colour intensifying sealer that provides durable protection by impregnating the pores in the stone with sealer, so dirt cannot become ingrained there. As you can see from the pictures the sealer dramatically enhanced the natural colours in the stone.

Once dry I backed my way out of the house with a final finishing polish using a white buffing pad to remove any excess sealant and bring up the sheen of the tiles even further. I left instructions with the client to keep off for a couple of hours while the sealer cured.

The client was over the moon with the end result, the floor was left shiny, protected and looking in a fabulous condition.

Marble Tiled Floor After Polishing Weybrige

 

Professional Restoration of a Marble Tiled Kitchen Floor in West Surrey

[ad_2]

Source link