The owner of this Porcelain tiled Kitchen floor in Twickenham was struggling to keep it clean and it was now in need of a deep clean. Twickenham famous for being the home of Rugby Union is only 9 miles away from my base in Shepperton, so it wasn’t long before I was able to pop over and survey the floor.
The tiles were a little grubby, but it was the grout that was most affected; its hard to believe but the now black grout was originally cream in colour and chosen to match to tile. Having visited the client, we discussed what needed to be done to get the floor looking back up to scratch and looking clean again. We agreed a price for the work to be carried out the following week.
Although this wasn’t the case its worth knowing that some types of Porcelain tile on the market today are Micro-Porous and contain small holes in the tile. These tiles need to be sealed to prevent dirt becoming ingrained as this can be very difficult to remove with a mop. Incidentally on the topic of mops I have noticed clients tend to rinse their mop in the same bucket containing the detergent. This results in the detergent being contaminated with dirt and being put back on the floor. If you are going to use this method to clean your floor it is best to have two buckets, one containing your detergent and the second where you rinse your mop.
Deep Cleaning a Porcelain Tile and Grout
To get the tiles clean I used a heavy-duty rotary buffer fitted with a black scrubbing pad and ran that over the floor along with a medium dilution of Tile Doctor Pro-Clean. Tile Doctor Pro-Clean is a versatile tile and grout cleaning product designed for this purpose, so it wasn’t long before the solution went dark as the dirt was released from the tile. The now soiled cleaning solution was then extracted from the tiles using a wet vacuum.
To get the grout lines really clean they had to be hand scrubbed using more Tile Doctor Pro-Clean and a hand-held scrubbing brush. The rotary pads struggle to get into the recesses of the grout lines, so this really is the best method and I find you get a better finish with this extra effort.
After sufficient scrubbing, we were satisfied that all of the soil was broken up, we then machine flushed and vacuumed the cleaning product and dirt away from the floor. As these tiles are factory sealed there is no need to apply a sealant.
One hour later, the floor was ready to be used again.
Professional Cleaning of Porcelain Tile and Grout in South Middlesex
The photographs below are of a Marbled Tiled floor that was installed over much of the ground floor of a cottage that formed part of a large county estate near Reigate.
The Marble floor tiles were lovely however the polish and sealer had worn off some time ago and the were now looking much worse for wear, additionally the once white grout had turned dark with dirt and I`m not sure even the owner realised its full potential. I provided a quote for cleaning and applying a deep polishing to the floor which was agreed and set a date to do the work.
Marble Tile and Grout Cleaning in Reigate
After protecting the wooden skirting with tape, I started the cleaning process by applying a medium dilution of Tile Doctor Pro-Clean which was scrubbed into the tiles using a stiff brush to remove any loose dirt and debris from the floor but primarily along the grout lines. The soiled cleaning solution was then rinsed off with water and then extracted with a wet vacuum.
Next step was to deep clean the tiles and bring back the polish using a set of four Tile Doctor diamond encrusted honing pads which fit a weighted rotary floor buffer and are applied in sequence starting with the 400-grit pad lubricated with water. This is followed with the 800-grit and then the 1500-grit pads rinsing with water after each pad and removing the soil generated by the burnishing process with the wet vacuum as before.
This work took much of the day so after applying the 1500-grit pad and rinsing I left the floor to dry out overnight.
Sealing and Polishing Marble Tiles with Shine Powder
The next day I started by applying the 3000-grit pad which is the final pad in the polishing process and really helps bring up the polished appearance of the Marble. The pad is applied to the floor dry using a little water sprayed onto the floor using a process we call a spray burnish.
The last step was to seal the Marble tiles and build the polish even further by applying Tile Doctor Shine Powder which is diluted with water and buffed into the Marble tiles using a white buffing pad. The shine powder did an excellent job of building the shine on the floor and provides a tough durable finish that should last.
After two days work the Marble tiled floor looked transformed and I was especially pleased with the deep level of shine and restored white grout that I had managed to achieve.
Restoring Polish to Marble Floor Tiles in East Surrey