This property in Sutton Coldfield dates to the early 1800s and was owned by the local church until recently. The property needed a lot of work and the new owners had asked me to restore the beautiful Victorian Tiled Flooring which I suspect was as old as the property itself. The property was in the process of a complete refurb when I first visited to survey the floor and so I recommended that they call me in to work on the floor when all the other work was complete. I find leaving the floor restoration until last is the best approach as tradesmen usually exacerbate the problem.
Although incredibly dirty the Victorian Tiles were in good condition for their age, however there were some areas where tiles were missing or damaged and replacements would need to be sourced and fitted. Sourcing replacements is not usually a problem for Victorian Floors as there are a few companies such as the Vintage Floor Tile Company that still sell them due to their popularity. I also find you can pickup old tiles at restoration yards and eBay.
Day 1 – Replacing Damaged Victorian Floor Tiles
On the first day I set about replacing the missing and broken tiles; I had taken photographs of the floor before hand and had plenty of time to source replacements. This process involves carefully removing the damaged tiles and scrapping out the subfloor to remove old adhesives and grout. This is followed by cutting the replacement tiles to size and fixing them in place using a flexible adhesive. If the subfloor has crumbled away, then this also needs cleaning out and building backup with cement to the right level before fixing the tiles. Needless to say, this is painstaking work and takes time to get right, in this case most of the day.
Day 2 – Deep Cleaning Victorian Floor Tiles
On the second day I set about giving the tiles a good deep clean using a strong dilution of Tile Doctor Pro-Clean which a very effective alkaline cleaning product that’s safe to use on tile, stone and grout.
The Pro-Clean was applied to the floor and then left to soak into the pores in the tile for about ten minutes before being scrubbed in using a rotary machine. The machine was fitted with a Polyscrub brush and run over the tiles at slow speed. This process worked well, and it wasn’t long before the cleaning solution had turned black with the dirt that had been released from the floor. The soiled solution was then extracted from the floor using a wet vacuum and the process repeated in areas that I felt could do with more work.
Old floors like these don’t have a damp proof membrane installed and can suffer from white alkaline salts being deposited on the surface of the tile and damp evaporates up through the tile as it dries. To counter this problem, I decided to follow up the cleaning by giving the tiles an acid wash using Tile Doctor Grout Clean-up, not only does this neutralise the salts it also removes old grout smears and other mineral deposits from tiles making them much cleaner.
I scrubbed the product into the tiles using a deck brush and then rinsed it off with water and extracted with the wet vacuum. Being an Acid, we don’t recommend you leave it on the floor for too long.
Day 3 – Sealing Victorian floor Tiles
The next day I confirmed the floor had dried and then proceeded to apply five coats of Tile Doctor Seal & Go Extra. This product is fully breathable and will cope well with any inherent damp issues that can cause problems in an old floor such as this, it also adds a nice shine to the tile as you can see in the photographs below.
The final result was a huge transformation and my customer was very happy with the outcome and booked me in to seal the new flooring in the kitchen/utility and conservatory areas.
Professional Restoration of Victorian Vicarage floor in Staffordshire