My customer was renovating their house in Gloucester and discovered this lovely vibrant Victorian tiled floor with blue accents under the carpet and were keen to get it restored and back to its’ former self. Gloucester lies close to the Welsh border, on the River Severn, between the Cotswolds to the east and the Forest of Dean to the southwest.
They were delighted to uncover the original floor but unsure if it could be restored asked me to come over and take a look. The tiles were in good physical condition for their age but were ingrained with dirt and had paint splashes, cement and carpet glue on the surface. The property had lots of period features, but this was by far the nicest. Luckily there was very little damage to the floor, so there was no need to source any extra tiles. We discussed what needed to be done and how the process would work, agreed a price and a timescale for the project which was accepted.
Deep Cleaning a Victorian Tiled Hallway Floor
The first process was to cover walls and skirting boards with plastic sheeting, I usually do this as a rule but in this case the hallway had just been decorated so we wanted to avoid any dirty splashes from the cleaning process.
Next a solution of tile doctor Tile Doctor Remove and Go was applied to the floor and left to dwell for 20 minutes and then with a buffing machine and black scrubbing pad I set about deep cleaning the floor. Tile Doctor Remove and Go is a strong coatings remover that can deal with old sealers, paint and glue, it’s also safe to use on tile, grout and stone. The floor was then rinsed with water and the now soiled cleaning solution was extracted from the floor with a wet vacuum.
Stubborn stains were spot treated using the same process and once satisfied with the results I gave the floor an acid wash using Tile Doctor Acid Gel. This neutralises any potential salt staining issues that could appear later as the floor dries. This process is known as efflorescence and can be very troublesome on old floors like these which don’t have a damp proof membrane installed. We often find covering old floors like these in a rubber underlay also prevents the floor from breathing which can lead to damp being trapped in the floor.
Sealing a Victorian Tiled Hallway Floor
We left the floor to dry off overnight and then the next day checked for moisture. It’s been a long hot summer, so the tiles had soon dried out. Happy with the results we started sealing the tiles with five coats of Tile Doctor Seal and Go. This is a specially formulated water-based blend of acrylic polymers that provides both a stain resistant surface seal and a durable low-sheen finish that works really well on Victorian tiled floors like this. Additionally, the product allows moisture vapour transmission so will be able to cope with the fact that this floor has not damp-proof membrane.
As you can see from the photos the sealant left a lovely finish and the customer was very pleased with outcome. The floor is now restored and offers a lovely traditional entrance to their property.
Professional Restoration of a Victorian Tiled Hallway in Gloucestershire