Travertine Tiled Floor | Tile Cleaners

Cleaning and Polishing a Travertine Tiled Floor

To get the floor clean and hone the stone to a polished appearance we use a set of Diamond impregnated burnishing pads which are run over the floor with a floor buffer. Tile Doctor do a set a of four which include 400, 800, 1500 and 3000 grit pads and are ideally suited for the purpose.

Travertine Tiled Floor During Cleaning Nationwide Building Society Bournemouth

The pads are applied with water for lubrication and in sequence starting with the coarse 400-grit, medium 800-grit and then fine 1500-grit pad. If you are familiar with grades of sandpaper used on wood, then you will appreciate that this is a similar kind of process. The floor is rinsed with more water in between each pad to remove the slurry that is generated and then extracted from the floor using a powerful wet vacuum. The last pad to be applied is the very fine 3000-grit which is applied with only a little water sprayed onto the tile and this really brings up a deep shine on the Travertine.

Travertine Tiled Floor During Polishing Nationwide Building Society Bournemouth

Sealing a Travertine Tiled Floor

After the floor was dry, we applied two coats of Tile Doctor Colour Grow impregnating sealer that works from within by occupying the pores in the stone for maximum protection. Tile Doctor Colour Grow is also a colour intensifying sealer which provides durable surface protection, as well as enhancing the colour of the floor bringing out the natural tan and cream colours. Colour Grow is also a breathable sealer that allows moisture to rise through the floor however being a new building this would unlikely to be a factor.

Travertine Tiled Floor After Polishing Nationwide Building Society Bournemouth

As you can see from the pictures the results were amazing and the client was very pleased! They commented how smoothly the process had gone and how accommodating we had been coming in overnight. Hopefully there are many more branches that may require our services!

Professional Polish and Seal of a Commercial Travertine Floor in Dorset

This client from Cobham had her kitchen and diner tiled with Travertine six years ago. With two children and three dogs living there, the sealer has gradually worn away leaving the stone exposed to dirt. The leafy village of Cobham lies in the borough of Elmbridge which is noted as being a one of the most desirable places to live in the UK. As a result, it attracts a lot of investment in property including expensive tiled floors.

I went over to survey the floor and discussed with the client how we could improve the floors appearance. The solution I proposed was to deep clean the tiles to extract all the dirt and remove what was left of the old sealer and then to re-seal the floor in order to protect it going forward. This process typically takes two days to complete; day one is spent cleaning the stone and grout, including the removal of the existing sealer and day two is spent sealing and polishing. The client was satisfied with the quotation and we arranged a time to come back and carry out the work.

Cleaning a Travertine Tiled Kitchen Floor

Firstly, I asked the client to clear the floor and to help me put the dining table in the garden out of the way. Then using Tile Doctor Pro-Clean and a wire brush I cleaned the grout in the kitchen, diner and utility room. It was a large installation of Travertine, so this task took some time to complete. The floor was rinsed, and all the dirt produced was removed with a wet vacuum cleaner.

The next job was to remove what remained of the previous sealer and top layer of dirt. This was done with a rotating buffing machine with a set of diamond encrusted burnishing pads. The first one applied is a coarse 400-grit pad followed by 800 and 1500-grit, working through the pads in sequence. You might be familiar with the grit system from sandpaper, rough down to smooth. The process is lubricated with water and the slurry generated is rinsed off with water and extracted using a wet vacuum.
I left the floor to dry off overnight, they can walk on it during this time, but they needed to be careful of any spillages. The dogs were also welcomed back in from the front room.

Sealing a Travertine Tiled Kitchen Floor

The second day started with and inspection of the Travertine tile and grout looking for any areas that need further attention. I was satisfied that the floor was looking its’ best and once the preparation was complete, I applied the first coat of sealer.

On this occasion I went with Tile Doctor Ultra Seal which is doesn’t change the look of the stone giving a completely natural look. This product soaks into the pores of the stone protecting if from within and should last between three and five years depending on the amount of wear it received and how the floor is cleaned and maintained.

Two coats of sealer were applied and after each coat dried, I polished the floor using a very fine 3000-grit diamond pad. The pad is run across the Travertine dry with only a little water sprayed onto the tile using a process we call a ‘Spray Burnish’. I asked the client to keep off the travertine until it’s cured, usually for a couple of hours which is always a good excuse to go out for the evening!

The client was very happy the floor and they remarked it looked as good as when it was first laid. For aftercare I recommended using Tile Doctor Stone Soap which is ideal for the regular cleaning of sealed natural stone floors, many supermarket products are simply too harsh and will reduce the life of the sealer.