Grubby Tiled Shower Cubicle Renovated in in Chorlton-cum-Hardy

Posted on May 13, 2019 by TileProf

Shower Tile and Grout renovation is a speciality of ours and has made us popular with landlords who understand properties are easier to rent when the bathrooms look fresh. This was the case with this shower cubicle at a rental property in Chorlton-cum-Hardy which is a popular suburb of Manchester south of Old Trafford.

The shower cubicle was in quite a state and well overdue a deep clean. You can see from the photographs that the shower tray was very dirty, the white ceramic wall tiles were grubby, the white grout had gone black and the silicone sealant had darkened with mould.

Cleaning a Grubby Shower Cubicle in Chorlton

Working in sections from top to bottom I began the cleaning process by treating the tile and grout with Tile Doctor Duo-Clean which a double action cleaning product. Duo-Clean is a recent addition to the Tile Doctor range and combines the properties of an effective tile and grout cleaner with a mould remover. It cleans and can remove mould and blackspot from grout and silicone, so an ideal product for cleaning up neglected shower cubicles.

The spray attachment mixes the product with air making it light and allowing it to easily stick to vertical surfaces where it can get to work breaking down dirt and mould. It was sprayed onto the wall tile and grout and then left to dwell for five minutes before being scrubbed in with a stiff brush. The area was subsequently rinsed with water to remove the soil. In some stubborn places, I didn’t achieve the desired result right away, so I repeated the cleaning process a couple of times before moving onto the next section. I can tell you a lot of elbow grease was expended on this particular cubicle, I even cleaned up the shower tray which had gone green with an accumulation of soap scum.

When the tile and grout was cleaned to the best of my abilities, I used a heat gun to dry the walls quickly. Next, I removed all the mouldy silicone around the shower tray with a sharp knife and then further dried the area.

Sealing Shower Grout

After everything was cleaned and dried, I sealed the grout using Tile Doctor Wall Tile and Grout Sealer Aerosol Spray. The tiles were glazed ceramic so won’t accept a sealer however the top layer of grout is porous which makes it vulnerable to dirt, grease, mould and limescale. Sealing will therefore ensure it keeps its appearance for longer and reduce the need for regular maintenance. Being a spray on sealer it’s very easy to apply, all you have to do is wipe it off the excess sealer from the adjacent tile afterwards.

When I had finished sealing the grout, I applied new, high quality and mould resistant silicone in White to match the tile and shower tray. With that, the restoration was complete.

The whole process took less than a day and although it was hard work both myself and the landlord were very pleased with the outcome. If you didn’t know any better, you would think it was a brand-new installation.

Shower Cubicle Cleaning in Greater Manchester

The post Grubby Tiled Shower Cubicle Renovated in in Chorlton-cum-Hardy appeared first on Greater Manchester Tile Doctor.

Source link

Marble Floor Tiles Polished and Sealed in Middleton, Manchester

Posted on December 11, 2018 by TileProf

[ad_1]

This customer in Middleton near Manchester wanted to bring the shine up on the tiled floor in their Kitchen and Dining Room, it had been laid nearly fifteen years before and was now dull, lifeless and the grout was also in need of a clean.

I was told the tiles were Ceramic however after visiting the property and running some tests if became clear that the tiles were in fact Marble. There are some very realistic Ceramic and Porcelain tiles on the market however you usually find they have a set of repeating patterns whereas with natural stone no two tiles are the same.

Marble Tiled Floor Before Polishing Middleton Manchester

The floor had lost its shine over the years which is a common problem with natural stone such as Marble which ideally needs to be polished and have the sealer topped up every year to keep it in the best condition. The cleaning test results were so good that the customer booked us in to complete the floor straight away after agreeing the quote.

Cleaning and Polishing a Marble Tiled Kitchen and Dining Room Floor

We started by giving the floor a general clean with Tile Doctor Pro-Clean paying special attention to the grout where it was scrubbed in along the grout lines using a stiff narrow brush. The soiled cleaning solution was then rinsed off and extracted using a wet vacuum.

The next step was to clean and re-polish the Marble using the 400, 800 and 1500 grit burnishing pads which re-hone the stone bringing up the polish gradually. You use water to lubricate the process and rinse with more water in-between each pad to rinse off the soil that is generated. The soil is then extracted with a wet vacuum.

After running all three pads over the floor in sequence and the floor was left to dry off overnight and I returned the next day to complete the work.

Sealing a Marble Tiled Kitchen and Dining Room Floor

On my return I started by running over the floor with the fourth burnishing pad in the set which is a very fine 3000-grit pad. It’s applied with a little water sprayed onto the floor using a technique we call a “Spray Burnish” and it really brings up the polish on the Marble tiles.

The last step was to seal the Marble tiles which will protect them from dirt becoming ingrained in the pores of the stone and make them easier to clear. For this I chose to use Tile Doctor Colour Grow which is an impregnating sealer which has the added benefit of enhancing the natural colours in the stone.

Marble Tiled Floor After Polishing Middleton Manchester

It was the perfect choice for the floor and the final result was quite a transformation. Certainly my customer was very happy with the results and left the following feedback on the Tile Doctor feedback system.

“Excellent professional service. The floor tiles are back to how to how they were 14 years ago.”

Before leaving I discussed aftercare and explained that the more a polished floor gets used the more the shine and sealer wears off, so I always advise having the floor re-polished once a year using the 3000-grit pad and then adding another coat of sealer. My customer agreed and has already booked me in for a years’ time to do the work which should only take about two hours.

Professional Renovation of a Marble Tiled Floor in Greater Manchester

[ad_2]

Source link

Deep Cleaning Grubby Terrazzo Kitchen Tiles at Manchester Apartment

Posted on November 13, 2018 by TileProf

[ad_1]

I recently visited a customer with a grubby Terrazzo tiled kitchen floor who lived in the Skyline Apartments in the centre of Manchester. Billed as luxury accommodation the building has a Gym and apparently a 20-metre swimming pool on the roof. The floor in the Kitchen was around 6m square and my customer originally thought the tiles were Limestone, but I was able to confirm they were Terrazzo, not that it mattered from my point of view as the cleaning process would be the same.

The previous owner of the apartment had never maintained the floor properly, so my customer inherited a very grubby Terrazzo floor and had tried getting rid of the dirt without much success. After running a few tests, I could see that that any protective sealer had long since failed and dirt was now ingrained in the pores of the tile. The tiles would now need to be burnished to restore the appearance and then sealed to protect it from ingrained dirt going forward.

Cleaning and Polishing a Terrazzo Tiled Floor

To get the floor clean and ensure what was left of the old sealer was removed I scrubbed a strong dilution of Tile Doctor Remove and Go into the tiles. This product works best if you leave it to dwell on the tile for around ten minutes before working it in. Afterwards the soiled product was removed using a wet vacuum which makes light work of extracting liquids from hard floors.

To burnish the Terrazzo, I used a set of Tile Doctor Burnishing pads which are applied to the floor using a rotary floor buffer running a slow speed in sequence from coarse to very fine. Lubricated with water this process uses a coarse pad to cut back through the tile to remove marks and ingrained dirt. This is followed by the medium and fine pads rinsing the floor with water in between each pad and extracting the soil with a wet vacuum. The last pad which is a 3000-grit very fine pad is applied dry to the floor with only a little water sprayed onto the tile using a process we call a spray burnish.

Being a kitchen there were a few deep stains in the floor which I was able to spot treat with Tile Doctor Reduxa which is an interesting product that is absorbed into the floor and then when heat is applied it evaporates lifting the stain out with it.

Sealing a Terrazzo Tiled Kitchen Floor

To seal the Terrazzo, I used two coats of Tile Doctor Colour Grow which as the name suggest is a colour enhancing sealer. The product works by soaking into the tile occupying the pores so dirt cannot become ingrained there. It added a lovely finish to the Terrazzo, enhancing its appearance and will make the floor much easier to keep clean going forward.

The completed floor now looks clean and fresh and an amazing transformation considering how dirty the floor looked when I first arrived. My customer was very pleased with the improvement and left the following short comment on the Tile Doctor feedback system.

Kamila is the best!! great job.

Restoring a Terrazzo Tiled Kitchen and Family room Floor in Manchester

[ad_2]

Source link

Multiple Ceramic Tiled Shower Cubicles Refreshed in Sale

Posted on April 27, 2018 by TileProf

[ad_1]

The photographs below are from one of three shower cubicles we were asked to clean and restore at a modernised Victorian property in SALE Cheshire. Ceramic tiles are glazed so very easy to keep clean, grout and silicone however are not and if you let mould build-up untreated it can very difficult to remove.

Mould likes a warm damp environment which can be reduced by improving the ventilation in the shower room, other steps you can take to reduce mould include always leaving the door open after a shower to improve cross ventilation and rinsing the shower down with cold water after a shower. Tile Doctor also have a product called Oxy-Pro that you can spray on your tiles after use.

Sale is a town in Trafford, Greater Manchester but is historically part of Cheshire and dates to before the Middle Ages. A survey commissioned by the Royal Mail in 2017 highlighted Sale as the 4th most desirable town in England to live in and being so close to the city of Manchester makes it a popular choice for commuters.

Cleaning Ceramic Bathroom Tile and Grout

To get the grout clean Tile Doctor Pro-Clean was decanted into a spay bottle diluted with water and the solution was sprayed onto the grout lines. Pro-Clean in a strong and effective grout cleaner and after leaving it in place for about five minutes it was scrubbed in by hand using a stiff brush along the grout lines. I also gave the tile and cubicle glass a clean with Tile Doctor Oxy-Pro which comes in a ready to use spray bottle.

The next step was to carefully remove the old silicone sealant from around the edges of the shower cubicle using a sharp knife, so it could be replaced with new.

At this stage I took a step back to review the results of the cleaning, I wanted the best possible outcome for my customer and if more work was needed to get the shower looking it’s best now was the time. I concluded that the grout was much improved by unfortunately the mould staining was still visible in areas and that the best way to proceed would be to colour the grout.

Colouring Shower Tile Grout

Tile Doctor have a Grout Colourant product that’s available in ten different colours including White which I felt would be the best colour for the cubicle. Other colours include three shades of Grey, two shades of Brown and two shades of Beige as well as Black. The Grout Colourant is painted onto the grout lines using a small brush and I find a toothbrush works well for this purpose. Excess colourant needs to be removed from the tile before it sets, and I often find baby wipes work well for this purpose.

The grout colourant adds an epoxy barrier over the grout that is resistant to staining and much easier to clean than the grout itself. With this in place the grout will stay protected and the cubicle should keep its appearance for some time to come.

While the Grout Colourant was drying I replaced the silicone around the base of the shower cubicle using a premium mould resistant silicone that should be more resistant to staining.

Once the colourant and silicone had dried I gave the cubicle a final inspection and buffed up the ceramic tiles with a six-inch white pad fitted to a handheld buffer. As I mentioned before there were three shower cubicles to complete so as one was drying I was able to move onto another and as a result managed to complete all three in one day.