Leaking Bath Mastic Replaced and Tile Renovated in Harrogate

Posted on May 18, 2019 by TileProf

I couldn’t believe the state of the mastic sealant that had been applied to this bathtub at a house in the North Yorkshire Spa town of Harrogate. As you can see from the pictures, it was a mess. There were at least three layers of white silicon mastic sealant then a layer of clear silicone had been applied with a spatula then some grout on top of that! I feared the worst.

It was the result of a succession of bodge jobs that didn’t work and continued to let water leak down to the room below where it had left brown stains on the ceiling. The client had unfortunately tried to get it patched up but had just made the problem worse. The problem needed to be resolved properly so the ceiling below could dry out, be repaired and then re-painted.

Had the problem been dealt with immediately the damage would not have been so bad. By the time the water shows itself on the ceiling the leak has probably already been there for some time. The bathroom itself was in good condition but the mastic sealant was really letting it down. I discussed with the client what needed to be done and we agreed a price for the work and returned the following week.

Cleaning/Repairing Bathroom Tiles

I first washed the Ceramic wall tile and grout surrounding the bath with Tile Doctor Oxy-Gel to remove staining from the usual combination of dirt, grime, body oil, and soap scum. Being in gel form, this product sticks well to vertical surfaces where its best left for five to ten minutes before scrubbing in so it can get to work breaking down the dirt. I then rinsed the wall tiles with water and re-treated any stubborn stains with a repeat of the process until all the tile and grout was clean.

Once happy with the tile and grout I began to strip off the layers of silicone mastic. This is a slow process by hand, with care not the damage the tiles or the bath. After 4 hours it was all off. The final layer of white silicon was jet black, so had come away from the bath a long time ago. It is essential to have a nice clean surface to apply new silicon to ensure the best result. Adding layer upon layer will not solve the underlying problem.

Once l completely removed all traces of silicone l ran a heat gun over gap for about half an hour to remove the moisture. If any moisture had been left the new sealant wouldn’t adhere to the bath and tile properly causing it to peel off later and we would be back to square one.

The last step of the renovation was to fill the bath with water before applying a fresh thin bead of white silicone sealant. Applying mastic well takes a lot of practice to get a nice smooth finish but having carried out numerous bathroom and kitchen refurbs over the years it’s a skill I’ve manage to acquire. Once the fresh mastic was dry the water was emptied from the bath, this technique ensures the silicone is positioned correctly.

As you can see from the pictures there was quite a remarkable transformation. The client was speechless, the difference to the overall look of the bathroom was astounding. It would no longer be a chore for them to use the bathroom. Now they just need to allow the downstairs ceiling to dry out so they can redecorate.

Glazed Ceramic tiles are easy to clean however Grout can be a problem due to its cementous nature which traps dirt therefore I recommend protecting the grout with grout sealer which forms an invisible barrier over the grout and makes it easier to wash clean. For aftercare you can’t go wrong with Tile Doctor Aqua Pro which is designed for cleaning shower tile where the grout has been sealed.

Professional Restoration of a Bathroom Tiles in North West Yorkshire

The post Leaking Bath Mastic Replaced and Tile Renovated in Harrogate appeared first on North West Yorkshire Tile Doctor.

Source link

Grubby Tiled Shower Cubicle Renovated in in Chorlton-cum-Hardy

Posted on May 13, 2019 by TileProf

Shower Tile and Grout renovation is a speciality of ours and has made us popular with landlords who understand properties are easier to rent when the bathrooms look fresh. This was the case with this shower cubicle at a rental property in Chorlton-cum-Hardy which is a popular suburb of Manchester south of Old Trafford.

The shower cubicle was in quite a state and well overdue a deep clean. You can see from the photographs that the shower tray was very dirty, the white ceramic wall tiles were grubby, the white grout had gone black and the silicone sealant had darkened with mould.

Cleaning a Grubby Shower Cubicle in Chorlton

Working in sections from top to bottom I began the cleaning process by treating the tile and grout with Tile Doctor Duo-Clean which a double action cleaning product. Duo-Clean is a recent addition to the Tile Doctor range and combines the properties of an effective tile and grout cleaner with a mould remover. It cleans and can remove mould and blackspot from grout and silicone, so an ideal product for cleaning up neglected shower cubicles.

The spray attachment mixes the product with air making it light and allowing it to easily stick to vertical surfaces where it can get to work breaking down dirt and mould. It was sprayed onto the wall tile and grout and then left to dwell for five minutes before being scrubbed in with a stiff brush. The area was subsequently rinsed with water to remove the soil. In some stubborn places, I didn’t achieve the desired result right away, so I repeated the cleaning process a couple of times before moving onto the next section. I can tell you a lot of elbow grease was expended on this particular cubicle, I even cleaned up the shower tray which had gone green with an accumulation of soap scum.

When the tile and grout was cleaned to the best of my abilities, I used a heat gun to dry the walls quickly. Next, I removed all the mouldy silicone around the shower tray with a sharp knife and then further dried the area.

Sealing Shower Grout

After everything was cleaned and dried, I sealed the grout using Tile Doctor Wall Tile and Grout Sealer Aerosol Spray. The tiles were glazed ceramic so won’t accept a sealer however the top layer of grout is porous which makes it vulnerable to dirt, grease, mould and limescale. Sealing will therefore ensure it keeps its appearance for longer and reduce the need for regular maintenance. Being a spray on sealer it’s very easy to apply, all you have to do is wipe it off the excess sealer from the adjacent tile afterwards.

When I had finished sealing the grout, I applied new, high quality and mould resistant silicone in White to match the tile and shower tray. With that, the restoration was complete.

The whole process took less than a day and although it was hard work both myself and the landlord were very pleased with the outcome. If you didn’t know any better, you would think it was a brand-new installation.

Shower Cubicle Cleaning in Greater Manchester

The post Grubby Tiled Shower Cubicle Renovated in in Chorlton-cum-Hardy appeared first on Greater Manchester Tile Doctor.

Source link

Porcelain Shower Cubicle Tiles Expertly Refreshed in Edinburgh

Posted on October 10, 2017 by TileProf

Porcelain is a popular choice for tiles in modern homes due to its superior durability. It also makes a particularly suitable material for shower tiles because of its natural water resistance. Nonetheless, Porcelain tiles – just like any other type of tile – still require routine cleaning and maintenance to stay looking fresh and attractive.

This is especially the case for shower tiles, as they are subject to mould and scum caused by exposure to the dyes in shampoos and soaps etc which as well as staining the tiles can have a dramatic effect on the grout. Below is a photo of a Porcelain shower cubicle I was asked to restore in Edinburgh. The process for restoring these types of tiles is relatively quick and easy, providing you use the right products and methods. Here’s how I did it.

Cleaning and Sealing Porcelain Shower Cubicle Tiles

To begin refreshing this cubicle, I gave the whole area – paying particular attention to the grout lines – a scrub down using Tile Doctor Duo Clean. Duo Clean is our product of choice for the removal of the common mould and soap scum that builds up on cubicles like this one.

Next, I rinsed down the area with fresh water to remove any trace of cleaning product and then left it to dry for a short period of time. It’s difficult to get the grout lines perfectly clean, especially after years of neglect, but we can resolve the situation by simply recolouring the grout.

I this case I felt the grout although cleaner from when I started did need more work so I decided to go ahead and apply a Grout Colourant. Tile Doctor has a range of Grout Colourants available in ten colours so I painted on three coats of the white colourant which really improved the look of the grout leaving it clean and fresh. Another advantage is the colourant acts as a barrier on top of the grout sealing the grout joint and protecting them from further staining. Other popular colours available in the range include Black, Cappuccino, and three shades of Grey.

Finally, I ripped and out and replaced the mouldy silicone around the base of the shower cubicle and replaced it with fresh.

The client was very impressed with the speedy restoration. Before leaving the property, I explained that rinsing down the shower cubicle with fresh water after every use can help to reduce the effect of staining and leaving the door and window open after a shower improved ventilation and inhibit the growth of mould. Naturally you can always give me call if the situation gets out of hand.

Professional Tile Cleaning, Grout Recolouring and Sealing for a Mouldy Porcelain Shower Cubicle Restoration in Edinburgh

Source link

Dirty Grout Lines Refreshed on a Ceramic Tiled Hallway in Cirencester

Posted on July 24, 2017 by TileProf

Cirencester is a large market town in the East of Gloucestershire known for its rich history dating back to the Roman times, when it was known as Corinium. This area is also home to the Royal Agricultural University, the oldest agricultural college in the English-speaking world.

I visited the town recently to see a customer who was having significant problems with the cleaning of her Ceramic tiled hallway. Ceramic tiles are always a popular choice in high traffic areas like Hallways and Kitchens due to their durability, as well as water and scratch resistance. However, this floor had been installed a decade ago and during that time had not received adequate maintenance. Although the Ceramic tiles themselves had not faired too badly the grout lines were heavily ingrained with dirt, making them near impossible to clean with everyday cleaning products.

The property owner had tried numerous products without success and determined to get the grout clean again sought assistance from her local Tile Doctor. I deal with these types of issues all the time so I was happy to pop round and see what could be done to restore the floor back to its peak condition.

Cleaning a Dirty Ceramic Tiled Hallway

To begin, I set about cleaning the grout lines using a mixture of Tile Doctor Remove and Go, which is a multi-purpose stripper and degreaser that breaks down any old sealer, and Tile Doctor Pro-Clean, which is a strong alkaline-based cleaner suitable for all types of stone and tile. I applied the cleaning solution and left it to dwell for about 30 minutes, before using a grout brush to lift away a decade’s worth of grime and muck.

Next, I used Pro Clean again to scrub the tiles in combination with a black scrubbing pad fitted to a rotary machine, before rinsing the entire floor with fresh water to remove any traces of chemicals. Then, I dried the grout lines with a heat gun and left them to cool for about 10 minutes. The grout lines were subsequently ready to be sealed.

Sealing a Ceramic Tiled Hallway

With the floor ready to be sealed, I applied Tile Doctor Ultra-Seal to the grout lines using a pipette, which is a tool used to deliver a measured quantity of sealer.

Ultra-Seal is a premium sealer which is formulated to provide maximum stain protection. While leaving the grout with a natural look, the sealer will keep the grout looking fresh and free of ingrained dirt for some time to come.

The customer was amazed at how quickly I could transform the condition of the grout. As you can see from the photo below, the condition of the grout really shapes the appearance of the floor – and now these Ceramic tiles are a real asset to the property once again.