Honed Limestone Floor Renovated in Ecton

I was contacted by the owner of a property in the picturesque village of Ecton who was concerned that her Limestone floor spanning the kitchen and open plan breakfast area was starting to lose its natural appeal and was finding it harder to clean and maintain.

Limestone Tiled Dining Room Floor Before Renovation Ecton

I went over to take a closer look at the floor and carry out a survey. In order determine the best cleaning method I conducted a test on a small area of the floor. This gives the clients confidence in my abilities and a good idea of what result we they can expect. The Limestone was honed smooth but was not polished and the customers were keen not to add too much of an unnatural shine to the floor. The grout lines in some of the more heavily used areas, such as by the sink, were also discoloured and would require a decent scrub with an appropriate cleaning product.

I spoke to the clients about options for the finish to be applied after cleaning and they decided that they wanted to keep the tiles as light as possible with a slight shine. With the clients impressed with the test area I prepared I went away and produced a detailed quote which was e mailed to them along with our general T&Cs and the work was booked in to be completed shortly after.

Limestone Tiled Kitchen Floor Before Renovation Ecton

Cleaning a Limestone Tiled Floor

The floor covered quite a large area, some 38m2, and had some larger items of furniture that needed to be moved before starting. The first task was to scrub the grout lines with a specialist grout brush, designed to work the product into the grout. Limestone is an acid-sensitive stone, so a strong alkaline cleaner was required. I used Tile Doctor Pro-Clean mixed with warm water at a ratio of 3:1 which was left to dwell for around twenty minutes.

The area was then rinsed with water and the soil extracted before applying a series of diamond impregnated burnishing pads attached to a rotary scrubbing machine, ranging from a coarse 400 grit (200 in some of the more stubborn areas), a medium 800-grit and finishing with a fine 1500 grit to clean the stone. The whole area was then rinsed again and extracted using a wet pick up vacuum. The floor was then left to dry overnight.

Sealing a Limestone Tiled Floor

The following day a very fine 3000 grit diamond pad was used to ‘spray burnish’ the floor which uses very little water and ensures that any remaining residues are lifted as well as finishing the floor in the highest level of mechanical polishing possible prior to sealing.

If the clients desired a higher level of shine a powdered high shine sealer would have been worked into the tiles to achieve a highly reflective surface, however the mechanical polish was the highest level of shine wanted.

My client requested a completely natural finish so to seal the stone after cleaning I applied an impregnating sealer called Tile Doctor Ultra Seal. Impregnating sealers soak into the pores of the tile protecting them from within and Ultra-Seal doesn’t alter the appearance of the floor and so maintained the natural appearance of the stone keeping it as light as possible.

Limestone Tiled Kitchen Floor After Renovation Ecton

Aftercare instructions along with a bottle of suitable pH Neutral Tile Cleaner were supplied.
The customer was thrilled with the result and was surprised at the transformation of the floor, they even left the following feedback on the Tile Doctor website.

“Thank you so much Phil for a professional service resulting in my floor looking just as I wanted it too. You were attentive to all detail. I would strongly recommend Phil as a trustworthy, honest person to anyone who is considering work done. See you again in the Summer Phil to clean my patio. Natalie W, Northampton”

Limestone Tiled Dining Room Floor After Renovation Ecton

 

Cleaning and Sealing a Limestone Tiled Floor in Northamptonshire

Source link

Restoring the Appearance of a Polished Limestone Tiled Floor in Cheltenham

[ad_1]

The photographs below are of a Polished limestone floor that had been installed in the Kitchen of a house in Cheltenham approximately eight years prior. The polish and sealer had worn off over that time allowing dirt to become ingrained into the pores of the stone making it difficult to clean.

This is a common problem with all types of porous stone and tile which need to be sealed to maintain their appearance. Sealers do wear down over time with use however and need to be maintained, this is why Tile Doctor have created a maintenance program whereby we pop by every 12 months to give the floor a light clean and top-up the sealer, it only takes a few hours, but it keeps your sealer in good condition.

Polished Limestone Kitchen Floor Before Cleaning in Cheltenham Polished Limestone Kitchen Floor Before Cleaning in Cheltenham

Cheltenham by the way is a lovely town situated on the edge of the Cotswolds which is an area of Outstanding Natural Beauty. It has a racecourse and is well known for the mineral springs which were discovered here in 1716.

Burnishing a Dull and Dirty Limestone Tiled Floor

My first job was to protect the wooden kitchen units from any splashes by covering them some cotton sheets. Next, I set about restoring the Limestone’s appearance using a set of Burnishing Pads which is a form of polishing which involves the sequential application of four diamond encrusted pads of different grit levels.

The first pad applied is a Coarse 400 grit pad which is applied to the floor with a buffing machine and lubricated with water. This process grinds away the top layer of dirt and staining from the stone, along with any old sealer, the floor is then rinsed to remove the soil that is generated. I then move through the system, applying the Medium and then Fine pads using less and less water as you go but rinsing in-between and extracting the water with a wet-vac machine.

Once I was happy with the stone I scrubbed the grout lines to remove any soiling that the pads had failed to pick up. The floor was then given a final rinse and the wet vacuum used to extract as much moisture as possible. The floor was then left to dry out completely overnight.

Sealing a Limestone Tiled Floor

The next day I gave the floor a polish with the Very Fine 3,000 grit diamond burnishing pad, this is applied using a technique we call a “spray burnish” due to the fact that very little water is used during its application.

The next step was to seal the stone using for which I used Tile Doctor Colour Grow which is an impregnating sealer that protects the stone from within by occupying its pores. Colour Grow also has the added benefit of intensifying the natural colours in the stone. The floor was then left to dry for an hour before I gave it one final dry polish using the Very Fine burnishing pad.

Polished Limestone Kitchen Floor After Cleaning in Cheltenham

My customer was very happy with the final result and made the comment that they thought the floor looked brand new.

Polished Limestone Kitchen Floor After Cleaning in Cheltenham
 
 

Renovating a Polished Limestone Tiled Floor in Gloucestershire

[ad_2]

Source link