This Terrazzo tiled vestibule in Glasgow was completely dull and lacking colour when we arrived, this area probably see’s the most foot traffic in the house so it must of seen a fair amount of wear and abuse over the years.
Cleaning Terrazzo Tiles
Terrazzo is a very hard surface and needs to be burnished in the same way as you would treat Marble or Travertine, before we could do that thought we needed to remove any loose debris etc. that could scratch the surface during the burnishing process to the first job was to sweep out the area with a brush and vacuum up any loose debris etc.
It was a very tight area so use of our large Bonnet machine was ruled out and we opted instead for a small handheld rotary machine fitted with the diamond encrusted burnishing pads. The burnishing pads come in a set of four and you start with a coarse pad with a little water and work your way through the set moving from a the coarse pads through to the less abrasive pads; this process polishes the stone more and more until you get a smooth finish. After each pad was used the area was thoroughly rinsed with clean water to remove any excess polish before moving onto the next, once we had gone through all four pads the floor was left clean ,smooth, and shiny.
Sealing Terrazzo Tile
Once the burnishing process was completed we proceeded to seal the stone with two coats of Tile Doctor Colour Grow which is a colour enhancing sealer designed to protect the stone whilst lifting the natural colours.
Although quite intensive due to the space restriction it was quite a small area so it took just less than a day to complete.