Cleaning and Polishing Terrazzo tiles

This Terrazzo tiled vestibule in Glasgow was completely dull and lacking colour when we arrived, this area probably see’s the most foot traffic in the house so it must of seen a fair amount of wear and abuse over the years.

Terrazzo tiled vestibule in Glasgow before cleaning

Cleaning Terrazzo Tiles

Terrazzo is a very hard surface and needs to be burnished in the same way as you would treat Marble or Travertine, before we could do that thought we needed to remove any loose debris etc. that could scratch the surface during the burnishing process to the first job was to sweep out the area with a brush and vacuum up any loose debris etc.

It was a very tight area so use of our large Bonnet machine was ruled out and we opted instead for a small handheld rotary machine fitted with the diamond encrusted burnishing pads. The burnishing pads come in a set of four and you start with a coarse pad with a little water and work your way through the set moving from a the coarse pads through to the less abrasive pads; this process polishes the stone more and more until you get a smooth finish. After each pad was used the area was thoroughly rinsed with clean water to remove any excess polish before moving onto the next, once we had gone through all four pads the floor was left clean ,smooth, and shiny.

Sealing Terrazzo Tile

Once the burnishing process was completed we proceeded to seal the stone with two coats of Tile Doctor Colour Grow which is a colour enhancing sealer designed to protect the stone whilst lifting the natural colours.

Terrazzo tiled vestibule in Glasgow after cleaning

Although quite intensive due to the space restriction it was quite a small area so it took just less than a day to complete.
 
 

Source: Terrazzo Tile Cleaning in Glasgow

Curing Slippery Tile Problems

Last week we were asked to carry out a demonstration of our AntiSlip Treatment for a lady in Ashtead Surrey. She has white shiny Porcelain tiles laid on a patio area and when they get wet they are really slippery and dangerous and she was especially concerned about young children hurting themselves. We carried out a test patch for her and asked her to see if she could slip, not only did she try, but her gran and mother-in-law also tried and were extremely impressed. I left her with our quotation so she could discuss it with her husband. The next day I received a call asking me to go ahead and carry out the works.

Applying the Anti-Slip Solution

When applying this treatment it is vital that you follow all the guidelines and times for the different types of stone. It is a 3 stage application, the first is the primer which is mixed 4 : 1 which we scrubbed into small areas of about 6m2 at a time, when scrubbing we used a brush head on our rotary scrubbing machine which has the added advantage of cleaning the tiles.

Shiny Slippery Porcelain Tiles in Ashtead26

After about 5 minutes of scrubbing using a scrubbing pad we then vacuumed it all and left the tiles to dry and because we were outside in the sun it didn’t take long to dry. The next stage is to apply the Antislip treatment and for this we used a flat mop and for these type of tiles we needed to leave it to dwell for between 3 and 5 minutes, but we had to make sure that it did not dry in.

After the dwell time the 3rd stage is to scrub in another solution of the primer, but this time it locks in the Antislip. When you are scrubbing this stage you can feel the treatment working. Once we have completed this stage we vacuum it all up then rinse the area with fresh water to remove any residues.

Applying Anti Slip to Shiny Slippery Porcelain Tiles in Ashtead33

The complete area was around 50m2 and luckily the treatment package covered this area. In all the application took two of us around five hours to complete and after clearing our equipment away we then put all the garden furniture back in place.

We returned the next day because the customer also asked us to clean their driveway and the patio area was wet because of rain, but it was great to walk on and I did not slip at all.

Shiny Slippery Porcelain Tiles in Ashtead41

The customer was really happy, because if the treatment hadn’t worked her only other option would have been to rip up the tiles and replace them at a cost of thousands and to make things even better for her, this treatment will last around 4 years before she needs to have it re-applied.

Applying Anti-Slip Tile Treatments in Surrey

Maintaining Encaustic floor tiles

On a visit to a customer to a customer in Beckenham, Kent who had a pair of rugs that needed cleaning I was asked to take a look at her Encaustic kitchen floor tiles which had become dull and she couldn’t keep them clean. I carried out a demonstration on how I would clean them and also explained the different sealer options available and how each sealer can have a different effect. She was pleased with the demonstration and engaged me to clean the tiles as well as the rugs specifying a sealer that would leave a sheen on the tile.

Encaustic Floor Tiles Before Cleaning

Cleaning black Porcelain floor tiles

I set about scrubbing the floor using a hot water dilution of Tile Doctor Pro-Clean Tile and Grout cleaner combined 50:50 with NanoTech UltraClean which adds tiny abrasive particles to the solution to make a more effective cleaning product. The solution was worked into the tiles by scrubbing with a rotary machine fitted with a black scrubbing pad and a stiff hand brush was used along the tight grout lines. The soiled solution was removed using a wet vacuum and floor thoroughly rinsed down with clean water. The tiles were then left to dry with the aid of a Turbo Air blower to help speed up the drying time.

Encaustic Floor Tiles Before Cleaning Encaustic Floor Tiles Before Cleaning

Sealing Encaustic Floor Tiles

Once the tiles were dry I applied five coats of Tile Doctor Seal and Go which is a water based protective sealer that doesn’t give off any odour and produces a nice low sheen the customer was looking for.

Encaustic Floor Tiles After Cleaning

The final result was one happy customer with a clean easy to maintain tiled floor and two clean rugs as well.
 
 
Source: Cleaning and sealing Encaustic floor tiles

Removing Limescale from Mosaic tile and Stone

This property in London N6 had been rented out previously by the owners and they were now renovating it before moving back in, this work included a wet room which had glass mosaic floor tiles and a dark Basalt tile laid on the wall. The main problem had been a general lack of maintenance over the years which led to a major unsightly build-up of lime scale throughout the wet room. We agreed to do the work but had to explain to the client how difficult the work would be and set their expectation for only an eighty percent improvement. I must apologise in advance for the quality of some of the photographs on this page, the size of the room, low lighting a nature of the stone surfaces didn’t lend themselves well to being photographed.

Mosaic Tiled Floor and Basalt Tiles Before Mosaic Tiled Floor and Basalt Tiles Before

Day 1 -Cleaning Basalt and Mosaic Tiles

Having protected all the chrome furnishings within the wet room we started to soak the Basalt tiled walls with Tile Doctor Grout Clean-Up followed by scrubbing and rinsing constantly with clear water. Grout Clean-up is an Acid based product so you do need to take care when doing this however it is particularly effective at shifting mineral deposits like Limescale. When we were satisfied this had removed the majority of soap scum and lime scale we proceeded to clean the Glass Mosaic floor tiles using the same method.

Day 2 -Polishing Basalt wall Tiles

The basalt tiled walls now needed to be restored back to their original factory condition using small diamond encrusted burnishing pads attached to a hand held polishing machine. We started with a coarse pad which removed any remaining Limescale which had impregnated the surface of the stone and moved onto the finer pads which polish the stone. Once this was complete the tiles were given a final clean with Tile Doctor Neutral Cleaner which is an everyday cleaning product designed for regular use on stone or sealed tiled surfaces.

Day 3 -Sealing Basalt wall Tiles

We came back on the third day and after making sure the Basalt tiles had dried we gave it a final buffing to restore the stone to a deep high gloss shine. The last step was to seal the Basalt tile in order to protect it and make it easier to clean in the future and for this we applied three coats of Tile Doctor Colour Grow which is an impregnating sealer that soaks into the pores of the stone.

Finally we used a rotary floor polisher fitted with a white buffing pad to buff the mosaic glass floor to a high shine.

Mosaic Tiled Floor and Basalt Tiles After Mosaic Tiled Floor and Basalt Tiles After

 
 
Source: Dealing with Limescale issues on Tile in London

Pamment Tile Cleaning

This Pamment tiled hall was in a Grade II listed former Manor House in the village of Creeting St Peter, there were three areas of floor requiring attention two having being recently laid and the other the original floor. Similar to Terracotta, Pamment tiles are made from Clay and have been traditionally used throughout Norfork and Suffollk.

pamment tiles before cleaning pamment tiles before cleaning

Cleaning Pamment Tiles

I started the job using a solution of Tile Doctor Pro-Clean, which is a heavy duty cleaner ideal for stone, tile and grout. The cleaner was diluted with water and left to soak into the Pamment tile and grout for about 10 minutes before being scrubbed in with a black pad fitted to a rotary machine. The soiled solution was then removed with a wet vacuum and washed down with clean water to neutralise the floor of any chemical; we repeated this process a couple of times and we also used a stiff hand brushes to clean up the grout lines. Once happy the floor was given a final rinse and left to dry overnight, A dehumidifier was left running to ensure that the floor would be dry enough to seal the next day.

Sealing Pamment Tiles

The next day came back to do the sealing and after checking the floor had dried sufficiently proceeded to seal it . Tile Doctor Seal and Go was used to seal the floor, it’s a water based sealer so it doesn’t give off an odour when it’s drying and also offers durable stain protection together with a low sheen finish which enhances the look of the tile. Like Terracotta Pamment tiles are very porous and took seven coats of sealer r before it was fully sealed.

pamment tiles after cleaning pamment tiles after cleaning

The work took two days in all and now the floor is much easier to maintain.
 
 
Source: Pamment Tiles Cleaned in Suffolk