We often get calls to refresh bathrooms, which by the way if your selling your house is highly recommended as its cheap to do and it can transform a dingy bathroom into one that looks like it has just been installed; so replacing the silicone sealant strip around sinks and baths is something we tend to do a lot of and if you have ever done this yourself you will probably realise how tricky it can be.
This customer in Garstang only needed the strip around the sink replacing which isn’t a large job so I agreed to pop-in on the way back from another job in the local area and sort it out. The process is relatively simple, you use a sharp knife to remove the old sealant, clean the area up and then apply new, the trick is to apply just the right amount of silicone and then shape it with an angled tool. My preference is to use a Mapei silicone which if you live in Garstang can be sourced from Rockform tiles.
On the subject of bathroom maintenance I can highly recommend a product we sell called Tile Doctor Mould Away which used regularly does a great job of keeping your Silicone mould free.
Southport is an interesting seaside town with many Victorian terraced properties so it came as no surprise when I was asked to maintain a Victorian Tiled hallway in the town.
Cleaning a Victorian Floor Tiles
The floor was in good condition for its age and just in need of a clean and re-seal to keep it looking good, hallway area’s as you can imagine get more footfall than other parts of the house so are more likely to need a regular deep clean.
To get the floor clean and remove any remaining sealer the floor was sprayed with Tile Doctor Remove and Go which was left to soak into the tile for five minutes before being scrubbed in using a rotary machine fitted with a black scrubbing pad. The next step was to wash off the residue with water which was then removed using a wet vacuum. Following this the tiles were given a rinse in Tile Doctor Grout Clean-up which is an acid based product that can remove grout smears and mineral deposits, it also improves the ability of the sealer to bond with the tile. Last step before sealing was to give the floor a thorough wash down with clean water, which is designed to remove any trace of cleaning products before sealing; the water was removed with the wet vacuum and then left to dry overnight.
Sealing the Victorian Tiled Floor
The next day I returned and checked the floor for dampness using a Damp Meter which indicated the floor was dry and ready for sealing. For Victorian Floor tiles I recommend several coats of Tile Doctor Seal and Go which provides a low sheen finish whilst offering great stain protection.