This Concrete floor at a house in the market town of Bridport had been coated in bitumen which the owner wanted removed. The property had only recently changed hands and the bitumen had been used as an adhesive to hold down the previous flooring which the new owner had removed during renovation. Removing the Bitumen however was a different matter and hence we got the call.
Removing Bitumen from Concrete
Tile Doctor has a product for most things in its range and I’m happy to say I was able to clean up the floor using Tile Doctor Remove and Go which was left to soak into the bitumen to soften up before attacking it with a black pad fitted to a Numatic buffing machine which was weighted down to improve traction.
Some areas were stubborn to remove as you can imagine so to soften it further I used an Earlex Steamer and finally a Tile Doctor Diamond encrusted burnishing pad to cut into the concrete very slightly and remove most of the bitumen that had sunk below the surface.
The results were as good as they could be and the customer was very pleased as she said it made the whole room look much lighter.
This fireplace at a house at Canford Cliffs near Poole, Dorset and was constructed from a mixture of Limestone and Sandstone, both of which had suffered from ingrained soot damage in the forty plus years since in had been installed. The owners of the property wanted it cleaning up and although we tend to focus on tiles the methods and products we use work equally well on stone fireplaces so I was happy to take it on.
Removing Sealer from Limestone Floor Tiles
The first task was to protect the carpet in from of the fireplace from splashing and any potential mess and then I applied a strong mixture of Tile Doctor “Pro Clean” in warm water. It was left to soak in for a short while before being scrubbed into the stone by hand with a grout brush and a brass coated Spid wire brush which helped to brush away the more ingrained dirt. This took off the majority of the soil from the stone and a further application of Pro Clean was applied which I steamed off using an Earlex steamer and then rinsed thoroughly always taking care to minimise any run off.
Sealing Limestone Floor Tiles
Any stone needs to be bone dry before sealing so I left the Fireplace to dry for two days before returning to seal it using a number of coats of Tile Doctor Seal and Go which sank into the porous stones and enriched their colour as well as protecting them from further staining.
The fireplace is now looking like new again and has become a really attractive feature.