Dealing with Mouldy Silicone

We often get calls to refresh bathrooms, which by the way if your selling your house is highly recommended as its cheap to do and it can transform a dingy bathroom into one that looks like it has just been installed; so replacing the silicone sealant strip around sinks and baths is something we tend to do a lot of and if you have ever done this yourself you will probably realise how tricky it can be.

This customer in Garstang only needed the strip around the sink replacing which isn’t a large job so I agreed to pop-in on the way back from another job in the local area and sort it out. The process is relatively simple, you use a sharp knife to remove the old sealant, clean the area up and then apply new, the trick is to apply just the right amount of silicone and then shape it with an angled tool. My preference is to use a Mapei silicone which if you live in Garstang can be sourced from Rockform tiles.

Silicone Seal Replacement Garstang Before Silicone Seal Replacement Garstang After

On the subject of bathroom maintenance I can highly recommend a product we sell called Tile Doctor Mould Away which used regularly does a great job of keeping your Silicone mould free.
 
 
Source: Bathroom Renovation in Lancashire

Grouting and Cleaning Brick Floor Tiles

The owner of this house in Peppard Common near Henley on Thames was keen to have the grout completely removed from this brick paved floor in the Kitchen and re-done. This is a lot of work and re-colouring the grout with a Grout Colourant kit would have been faster and easier however it is something we can do if required.

Brick Paved Floor Before Regrouting and Cleaning Peppard

Removing Grout

I started by removing the kick boards around the base of the kitchen units then to remove the grout I had to cut along all the grout lines with a hand held multi tool; as you can imagine this work is quite painstaking and slow however I persisted and eventually completed the task which took me the whole day. After this I came back the next day and grouted the whole floor polishing off the excess grout as I went.

Cleaning Brick Paving

On the third day I gave the floor a clean with Tile Doctor Pro Clean diluted with water. The customer did not want a full scrub as the brick floor had a nice patina to it and a full scrub would have made the brick floor more of an orange colour. The last step was to give the floor a thorough rinse with water and then use a wet vacuum to extract as much water from the floor as possible.

Brick Paved Floor After Regrouting and Cleaning Peppard

In total the job took three days to complete and it now looks much cleaner and fresher.
 
 
Source: Tile, Stone and Grout Cleaning in Oxfordshire

Deep Cleaning Victorian Tiled Steps

The photographs below are from a set of steps outside a house near Brighton Marina; the customer had a number of requirements which included bringing the Victorian tiled door steps back to life and also to resolve a leak into the basement below.

Victorian Tiled Steps Brighton Marina Before Cleaning

Cleaning Victorian Tiled Steps

To get them clean we scrubbed in a strong solution of Tile Doctor Pro-Clean brushing off any moss growth in the process and exposing holes and weaknesses. It was a small area so this was done by hand using water to rinse away the soiled cleaning product and a wet vacuum to extract the water. Once the tiles were cleaned all the visible holes and cracks were filled using clear mastic and a builder went about resealing the basement below.

Sealing Victorian Tiles

With winter quickly approaching the weather has changed for the worse and I struggled to find two clear days of dry weather to seal the tiles in fact three weeks passed until it was clear enough to return. I started by wiping away any visible dampness and used the heat gun on any tricky corners. Once dry the tiles were sealed using Tile Doctor Pro-Seal which is a penetrating sealer that soaks into the tile occupying the pores in the tiles so contaminates can’t.

The property was fifty metres from the sea front so I applied four coats to be sure it would have extra protection against the elements; fortunately the weather was quite windy they dried quickly. The customer was very pleased with the result, so much so that she’s recommended me to her neighbours.

Victorian Tiled Steps Brighton Marina After Cleaning

 
 
Source: Tile, Stone and Grout Cleaning in Sussex

Deep Cleaning Terrazzo Tiles

Just to prove we take on any job large or small I thought I would post the details of this small Terrazzo Vestibule that we recently cleaned at the entrance to a house in Glasgow. The Terrazzo was not looking its best which is hardly surprising being in front of the main entrance to the house it must have seen a lot of foot traffic over the years.

Terrazzo vestibule before cleaning in Glasgow

Cleaning and Burnishing a Terrazzo Floor

Terrazzo is a very hard surface and as a result it has to be treated in the same way as other hard surfaces such as Travertine, Limestone and Marble which typically involve burnishing the surface to remove the dirt and restore the appearance.

Before burnishing the floor was cleaned using a strong dilution of Tile Doctor Pro-Clean which was left to dwell on the Terrazzo for a while before being scrubbed in by hand due to it being such a small area; following that the floor was given a quick rinse with water and a quick clean with Tile Doctor Neutral Cleaner to remove any trace of strong cleaning product.

The next step was to burnish the floor using a set of four diamond encrusted burnishing pads. You start with a coarse 400 grit burnishing pad which is run over the surface with a little water to help lubricate and this removes surface dirt and coatings such as sealers. Once that was finished we moved onto the medium 800 grit pad which is the first step of the polishing process and also removes ingrained dirt. The surface of the Terrazzo is still quite rough at this stage so once complete with the medium pad the fine (1,500 grit) is used smooth down the surface and continue to build up the polish in the floor. The last pad is a very fine (3,000 grit pad) and this pad builds on the existing polished effect to create a high shine finish.

All these pads are applied with water and the resultant slurry needs to be cleaned off during the process with the final step of giving the floor a thorough rinse with clean water.

Sealing a Terrazzo Floor

Once the floor was completely dry it was sealed using two coats of Tile Doctor Colour Grow which is an impregnating sealer designed to bring out the natural colours in the stone and penetrate into the pores of the tile preventing dirt from getting in there and providing maximum on-going stain protection. The floor was then buffed using a white buffing pad to bring up the shine further and remove any smears left from sealing.

Terrazzo vestibule After cleaning and sealing in Glasgow

 
 
Source: Tile, Stone and Grout Restoration Service in Glasgow

Removing Soot From a Stone Fireplace

This fireplace at a house at Canford Cliffs near Poole, Dorset and was constructed from a mixture of Limestone and Sandstone, both of which had suffered from ingrained soot damage in the forty plus years since in had been installed. The owners of the property wanted it cleaning up and although we tend to focus on tiles the methods and products we use work equally well on stone fireplaces so I was happy to take it on.

Canford Cliffs Stone Fireplace Before Cleaning

Removing Sealer from Limestone Floor Tiles

The first task was to protect the carpet in from of the fireplace from splashing and any potential mess and then I applied a strong mixture of Tile Doctor “Pro Clean” in warm water. It was left to soak in for a short while before being scrubbed into the stone by hand with a grout brush and a brass coated Spid wire brush which helped to brush away the more ingrained dirt. This took off the majority of the soil from the stone and a further application of Pro Clean was applied which I steamed off using an Earlex steamer and then rinsed thoroughly always taking care to minimise any run off.

Sealing Limestone Floor Tiles

Any stone needs to be bone dry before sealing so I left the Fireplace to dry for two days before returning to seal it using a number of coats of Tile Doctor Seal and Go which sank into the porous stones and enriched their colour as well as protecting them from further staining.

Canford Cliffs Stone Fireplace After Cleaning

The fireplace is now looking like new again and has become a really attractive feature.
 
 
Source: Tile, Stone and Grout Cleaning Service in Dorset

Deep cleaning a Patio

These photographs were from earlier in the year at a residence in Achurch which had a number of paved areas and patios which like any patio in the UK had discoloured over winter and the colours in the stone had become grey and un-inviting. Being a Tile Doctor and Carpet Cleaner requires an investment in high pressure cleaning equipment which lends itself well to external patio cleaning.

Paving Slabs in Achurch Before Cleaning Paving Slabs in Achurch Before Cleaning

Patio Pressure Washing

With less preparation required when working outside to protect other surfaces I was soon setup and started by applying a strong dilution of Tile Doctor Pro-Clean which is a multi-purpose cleaner and stripper which being an alkaline rather than acidic product is safe to use on stone, tile and grout. The solution was left to soak into slabs for a while so it could get to work the grime and it was then scrubbed in using a yard brush. The next step was to use a high pressure washer running at a medium pressure so as not to blow out the mortar between the slabs. The pressures available on the truck mounted pressure washer are much higher than those available on domestic machines so you do have to be careful.

Paving Slabs in Achurch After Cleaning Paving Slabs in Achurch After Cleaning

The job took half a day and I think you will agree the patio now looks newly laid.
 
 
Source: Tile, Stone and Grout Cleaning Service in Northamptonshire

Removing Plaster from Quarry Tiles

This Quarry tiled floor was at a house in the town of Market Harborough and as you can see from the photograph below it was in a right state due to the plastering that had gone on previously while the property was refurbished. The plasterer has taken no steps to protect the tiles and as a result there was plaster and plaster dust ingrained into the tile.

Quarry Tiles Deep Cleaned in Market Harborough Before

Deep Cleaning Quarry Tiles

To clean the floor and remove mess of plaster that it has become covered it the whole floor was soaked in a strong dilution of Tile Doctor Remove and Go which is a strong coatings remover that is safe to use on tile, stone and grout. If was left to dwell on the tiles for around twenty minutes before being worked into the floor with a rotary machine fitted with a black scrubbing pad, the grout was also scrubbed but this needs to be done by hand with a stiff brush. The soiled cleaning solution is then rinsed away using a wet vacuum and the process repeated on stubborn areas until all the tiles were clean. Once I was happy the floor was in an acceptable condition it was thoroughly rinsed with water to remove any cleaning products that might upset the sealer and then left to dry overnight; the wet vacuum was used again to remove the water and help dry the floor.

Sealing Quarry Tiles

We delayed our return until the decorators had painted the walls and unlike the plasterers they protected the floor so we didn’t have to spend time removing paint from the tiles. The tiles were thoroughly dry when we returned and so we got straight on with the task of sealing them with five coats of Tile Doctor Colour Grow which is an impregnating sealer that occupies the pores in a tile preventing contaminates from become ingrained and as its name suggests does a great job of enhancing the colour in the tile.

Quarry Tiles Deep Cleaned in Market Harborough After

 
 
Source: Tile, Stone and Grout Cleaning and Sealing in Leicestershire

Annual Patio and Paving Slab Cleaning

These photographs are from the garden of a house in the beautiful village of Titchmarsh in Northamptonshire. The request was to clean the patios and paths which if not cleaned regularly become dirty and lose their appearance during the English winter.

Stone Circle Before Cleaning Gazebo Before Cleaning

Cleaning Patios and Paths

The process I follow for cleaning path’s, patios and paving in general is basically to apply a strong dilution of Tile Doctor Pro-Clean and then let it soak in to get to work on the dirt and grime for ten minutes before scrubbing with a stiff brush; this is then followed by pressure washing.

Stone Circle During Cleaning Stone Circle During Cleaning

Home owners can buy pressure washing machines and many domestic models are available in DIY stores however none are as powerful as the machines used by Tile Doctors which can generates pressures far in excess of a domestic system that make light work of cutting through grime.

Stone Circle After Cleaning Gazebo After Cleaning

 
 
Source: Residential and Commercial Tile and Stone Cleaning in South Wales

Cleaning 100 year old Quarry tiles near Cardiff

This Red Quarry Tiled floor had been laid when the house was built back in 1910 so it was over 100 years old and had years of wear and tear to show for it including old cement and paint from some decorating work that had been done some years prior. The house was located in the town of Treharris just outside of Cardiff and being an original feature of the house the owner wanted it looking as good as it could be.

Red Quarry Tiles Floor in Treharris Before Cleaning

Cleaning a Quarry Tiled Floor

I first checked for any moisture as these old floors were often laid without damp proofing and a damp floor can impact sealing later. Fortunately the reading was nice and dry, I then set about carefully scrapping off as much old paint and cement as possible. I then swept up as much of the dust as I could and caught the rest with a hoover.

The next step was to cover the whole floor in Tile Doctor Remove and Go mixed with a little NanoTech Ultra Clean which basically adds tiny abrasive particles to a powerful coatings remover. I left this on to soak into the tile for about an hour knowing that using this combination would not only remove any old surface coatings such as sealers it would also clean the floor as well. The solution was then worked into the floor using a rotating scrubbing brush attachment on a floor machine effectively letting the machinery do all the hard work. The floor was then rinsed twice with clean water which was then removed using a wet vacuum.

Red Quarry Tiles Floor in Treharris Scrubbed

It was clear at this point that the cement I could see on the surface of the tile was basically grout from an appalling tiling job when the floor was laid 100 years earlier. Fortunately Tile Doctor has a solution for that problem called Grout Remove and Go which is an acid based product that will remove grout and mineral deposits such as efflorescence. Being an acid I had to be careful so it was applied to the tile working one square metre at a time cleaning and scraping as I went along. After each section the floor was given a good rinsing again using the wet vacuum to remove the liquids from the floor. The last step of the cleaning process which I always do for Quarry and Victorian floor tiles was to finish off the rinsing process with a steam clean which brings out any remaining dirt and brings the tile back to its raw state.

Red Quarry Tiles Floor in Treharris Cleaning

Sealing a Quarry Tiled Floor

I cleaned the floor on the Friday and then left it to try for two days coming back on the Sunday to damp test the floor once again to ensure it was ready for sealing. The moisture reading was fine for sealing and as the customer had asked for a mild shine finish I sealed the floor using Tile Doctor Seal and Go which brought out the black and red colours in the tile back to life.

Red Quarry Tiles Floor in Treharris Sealed

 
 
Source: Residential and Commercial Tile Cleaning in South Wales

Refreshing tired flagstone floor tiles

These photographs are of a Flagstone floor tiled floor installed at a house in Glasgow. They were well worn, looking washed out and overdue a deep clean and re-seal, there was also remnants of adhesive and paint and I suspect the floor had been covered in carpet at some point in the past.

Cleaning Flagstones in Glasgow

Cleaning Flagstone Floor Tiles

Working in sections the tiles were covered in Tile Doctor Remove and Go which as the name suggests is designed to safely remove coatings from tiles, this was left to soak in for a while before scrapping off the glue and paint from the stone surface using a wire brush and paint scrapers.

The second step was to scrub the floor using a strong dilution of Tile Doctor Pro-Clean worked in using a rotary bonnet machine fitted with a hard nylon brush attachment. The floor was then then rinsed down with clean water and the soiled solution extracted using and industrial wet vacuum. This process was completed three to four times to ensure all the dirt was removed.

The floor was then left to dry assisted by a turbo air mover and damaged pointing and cracks between the stone was patched up using a sand/cement mortar. The cleaning and repairing process took most of the day so once complete we left for the day leaving the turbo air mover switched on to ensure the floor would be nice and dry of the next day.

Cleaning Flagstones in Glasgow Cleaning Flagstones in Glasgow

Sealing Flagstones

We returned the next day and once we had checked the stone had dried we proceed to seal it using five coats of Tile Doctor Seal and Go which will protect the floor and also adds a nice sheen to the tile.

Cleaning Flagstones in Glasgow

 
 
Source: Residential and Commercial Tiled Floor Cleaning in Glasgow

Restoring a damaged Victorian Tiled hallway in South Wales

This is an original Victorian tiled hallway floor in Cardiff that dated back to when the house was built in the year of 1890. The previous householders of which had a radiator installed serviced by laying pipes right through the middle of the floor destroying the tiles as they went, they then back filled the channel with cement. On top of that many of the other tiles had been splashed with cement and paint.

Abused Victorian Floor Cardiff Before

Repairing Victorian Floor Tiles

My first job was to carefully remove the cement from the channel and to precisely cut back any old cement bedding and old cement grout away from any tile edges in preparation for the replacement tiles which fortunately I was able to get hold of.

Abused Victorian Floor Cardiff Before

After all the previous preparation I started carefully scraping off cement from all around the edges of the remaining tiles as well as gloss and emulsion splashes from the surface essentially giving the whole floor a thorough scrape with a hand held scraper vacuuming up the mess as I worked. Interestingly for a floor of its age I tested the floor in various places for moisture and found it to be perfectly dry.

Cleaning a Victorian Floor

To clean the floor I mixed three parts Tile Doctor Remove and Go with NanoTech UltraClean which basically adds small abrasive particles to a powerful sealer and coatings remover making it even more effective. This was applied to the whole floor and left to soak in for an hour making sure not to let it dry out by applying further amounts; leaving it to dwell for an hour gives it time to eat away at any dirt and coatings on the tile making the scrubbing processes easier.

To scrub the tiles I used a rotary machine fitted with a black scrubbing pad rinsing and extracting the soiled solution along the way. This cleaned up the tiles well however there were still some cement stains so this time Tile Doctor Grout Clean-up was applied to the floor in sections and left to ten minutes to dwell before working it in with another black scrubbing pad and rinsing off. This product is acid based so you can’t leave on the tiles for too long; once I was happy with the final result the whole floor was given a thorough rinse with plenty of clean water using a wet vacuum to extract the waste and dry the floor.

The channel was then filled with cement and once it had set replacement replica Victorian tiles from The Original Tile Company were installed. I then grouted the floor in a medium grey grout let the tiles become solid and the grout go hard before using a steam cleaner to make sure that I have removed all the tile doctor cleaning solutions prior to sealing.

Sealing a Victorian Floor Sealing

The customer wanted a semi-gloss finish so once I had tested the floor again to make sure it was dry I sealed the tiles with Tile Doctor Seal and Go which enhanced the colour of the floor tiles and added a nice sheen.

Abused Victorian Floor Cardiff Completed Abused Victorian Floor Cardiff Completed

As you can see the new tiles fitted beautifully and the old floor tiles cleaned up so successfully the difference is impossible to spot. It was a lot of painstaking work though taking five days to finish but well worth the result.
 
 
Source: Residential and Commercial Tiled Floor Restoration in South Wales

Victorian Tile Maintenance

This was a straight forward request to clean and re-seal a Victorian Minton tiled floor in Coventry. The tiles were in good condition but there were a few stubborn stains that needed dealing with.

Victorian Minton tiles cleaned and Sealed coventry Victorian Minton tiles cleaned and Sealed coventry

Cleaning Victorian Tiles

I used a concentrated dilution of Tile Doctor Pro-Clean to clean and strip the old sealer from the floor. It was first left to soak into the tiles for around 15 minutes before being scrubbed into the Victorian tile and grout using a slow speed rotary machine fitted with a scrubbing pad. The dirty solution was removed and the process repeated and grout lines scrubbed until I was happy the tiles were clean; this was then followed with a thorough rinse with water and a wet vacuum was used to remove the fluids and get the tile and grout as dry as possible. This process took most of the day so once the floor was clean I left for the day leaving it to dry overnight.

Sealing Victorian floor tiles

I came back the next day and after confirming the tiles had dried I began sealing them using six coats of Tile Doctor Seal and Go sealer which will provide stain protection as well as adding a nice shine to the floor. The interesting thing about Seal and Go is that’s it’s a water based sealer so you don’t get a smell as it dries.

Victorian Minton tiles cleaned and Sealed coventry Victorian Minton tiles cleaned and Sealed coventry

 
 
Source: Maitaining Victorian Tiles in Warwickshire

Victorian Tiled Floors in Southport

Southport is an interesting seaside town with many Victorian terraced properties so it came as no surprise when I was asked to maintain a Victorian Tiled hallway in the town.

Cleaning a Victorian Floor Tiles

The floor was in good condition for its age and just in need of a clean and re-seal to keep it looking good, hallway area’s as you can imagine get more footfall than other parts of the house so are more likely to need a regular deep clean.

Victorian Tiles Southport Before Cleaning

To get the floor clean and remove any remaining sealer the floor was sprayed with Tile Doctor Remove and Go which was left to soak into the tile for five minutes before being scrubbed in using a rotary machine fitted with a black scrubbing pad. The next step was to wash off the residue with water which was then removed using a wet vacuum. Following this the tiles were given a rinse in Tile Doctor Grout Clean-up which is an acid based product that can remove grout smears and mineral deposits, it also improves the ability of the sealer to bond with the tile. Last step before sealing was to give the floor a thorough wash down with clean water, which is designed to remove any trace of cleaning products before sealing; the water was removed with the wet vacuum and then left to dry overnight.

Sealing the Victorian Tiled Floor

The next day I returned and checked the floor for dampness using a Damp Meter which indicated the floor was dry and ready for sealing. For Victorian Floor tiles I recommend several coats of Tile Doctor Seal and Go which provides a low sheen finish whilst offering great stain protection.

Victorian Tiles Southport After Cleaning

 
 
Source: Cleaning a Victorian Tiled Floor in Stockport

Cleaning and Sealing Quarry Tiled Floors

The customer called me in to resolve a problem in at a beautiful holiday cottage in Cockermouth which had an old Quarry tiled floor installed which she had tried to make shine but had ended up turning it pink in places

Cockermouth Quarry Tiled Kitchen floor before cleaining 1 Cockermouth Quarry Tiled Kitchen floor before cleaining 2

Cleaning Quarry Floor Tiles

On my arrival I spent time protecting the kitchen units and adjacent wooden floor and then started on removing the old sealer with Tile doctor Remove and Go; I sprayed it on working in small areas and working it into the tile with a brush making sure to scrub it in well, the resultant soiled solution was washed off with clean water the and then removed using a wet vacuum. After finishing with the tile I moved onto the grout joints using the same process to make sure they were all clean and then the floor was given a good rinse to neutralise the floor before sealing. Again a wet vacuum was used to remove any liquids from the floor and it was then left to dry fully overnight.

Sealing Quarry Floor Tiles

The next day I returned to the cottage and after verifying the floor was dry with a damp tester it was sealed with four coats of Tile Doctor Seal and Go which provides on-going protection as well as adding a nice shine to the tile.

Cockermouth Quarry Tiled Kitchen floor after cleaining 1 Cockermouth Quarry Tiled Kitchen floor after cleaining 2

This job took me two days and whilst I was there I took the time to explain how to maintain the floor going forward and the importance of using a Neutral Cleaner to extend the life of the sealer. Certainly the customer was very happy with the results and left the following message our feedback system:

“Absolutely delighted the tiles were very marked in places but Heidi has managed to get them off and the tiles are back to their true colour which I hoped they would be. Heidi explained step by step the procedure and I am very pleased with the result Thank you very much for the time spent and I would recommend Heidi — Veronica”
 
 
Source: Professional Quarry Tile Cleaning Service in Cumbria

Cleaning and Polishing Terrazzo tiles

This Terrazzo tiled vestibule in Glasgow was completely dull and lacking colour when we arrived, this area probably see’s the most foot traffic in the house so it must of seen a fair amount of wear and abuse over the years.

Terrazzo tiled vestibule in Glasgow before cleaning

Cleaning Terrazzo Tiles

Terrazzo is a very hard surface and needs to be burnished in the same way as you would treat Marble or Travertine, before we could do that thought we needed to remove any loose debris etc. that could scratch the surface during the burnishing process to the first job was to sweep out the area with a brush and vacuum up any loose debris etc.

It was a very tight area so use of our large Bonnet machine was ruled out and we opted instead for a small handheld rotary machine fitted with the diamond encrusted burnishing pads. The burnishing pads come in a set of four and you start with a coarse pad with a little water and work your way through the set moving from a the coarse pads through to the less abrasive pads; this process polishes the stone more and more until you get a smooth finish. After each pad was used the area was thoroughly rinsed with clean water to remove any excess polish before moving onto the next, once we had gone through all four pads the floor was left clean ,smooth, and shiny.

Sealing Terrazzo Tile

Once the burnishing process was completed we proceeded to seal the stone with two coats of Tile Doctor Colour Grow which is a colour enhancing sealer designed to protect the stone whilst lifting the natural colours.

Terrazzo tiled vestibule in Glasgow after cleaning

Although quite intensive due to the space restriction it was quite a small area so it took just less than a day to complete.
 
 

Source: Terrazzo Tile Cleaning in Glasgow

Curing Slippery Tile Problems

Last week we were asked to carry out a demonstration of our AntiSlip Treatment for a lady in Ashtead Surrey. She has white shiny Porcelain tiles laid on a patio area and when they get wet they are really slippery and dangerous and she was especially concerned about young children hurting themselves. We carried out a test patch for her and asked her to see if she could slip, not only did she try, but her gran and mother-in-law also tried and were extremely impressed. I left her with our quotation so she could discuss it with her husband. The next day I received a call asking me to go ahead and carry out the works.

Applying the Anti-Slip Solution

When applying this treatment it is vital that you follow all the guidelines and times for the different types of stone. It is a 3 stage application, the first is the primer which is mixed 4 : 1 which we scrubbed into small areas of about 6m2 at a time, when scrubbing we used a brush head on our rotary scrubbing machine which has the added advantage of cleaning the tiles.

Shiny Slippery Porcelain Tiles in Ashtead26

After about 5 minutes of scrubbing using a scrubbing pad we then vacuumed it all and left the tiles to dry and because we were outside in the sun it didn’t take long to dry. The next stage is to apply the Antislip treatment and for this we used a flat mop and for these type of tiles we needed to leave it to dwell for between 3 and 5 minutes, but we had to make sure that it did not dry in.

After the dwell time the 3rd stage is to scrub in another solution of the primer, but this time it locks in the Antislip. When you are scrubbing this stage you can feel the treatment working. Once we have completed this stage we vacuum it all up then rinse the area with fresh water to remove any residues.

Applying Anti Slip to Shiny Slippery Porcelain Tiles in Ashtead33

The complete area was around 50m2 and luckily the treatment package covered this area. In all the application took two of us around five hours to complete and after clearing our equipment away we then put all the garden furniture back in place.

We returned the next day because the customer also asked us to clean their driveway and the patio area was wet because of rain, but it was great to walk on and I did not slip at all.

Shiny Slippery Porcelain Tiles in Ashtead41

The customer was really happy, because if the treatment hadn’t worked her only other option would have been to rip up the tiles and replace them at a cost of thousands and to make things even better for her, this treatment will last around 4 years before she needs to have it re-applied.

Applying Anti-Slip Tile Treatments in Surrey

Maintaining Encaustic floor tiles

On a visit to a customer to a customer in Beckenham, Kent who had a pair of rugs that needed cleaning I was asked to take a look at her Encaustic kitchen floor tiles which had become dull and she couldn’t keep them clean. I carried out a demonstration on how I would clean them and also explained the different sealer options available and how each sealer can have a different effect. She was pleased with the demonstration and engaged me to clean the tiles as well as the rugs specifying a sealer that would leave a sheen on the tile.

Encaustic Floor Tiles Before Cleaning

Cleaning black Porcelain floor tiles

I set about scrubbing the floor using a hot water dilution of Tile Doctor Pro-Clean Tile and Grout cleaner combined 50:50 with NanoTech UltraClean which adds tiny abrasive particles to the solution to make a more effective cleaning product. The solution was worked into the tiles by scrubbing with a rotary machine fitted with a black scrubbing pad and a stiff hand brush was used along the tight grout lines. The soiled solution was removed using a wet vacuum and floor thoroughly rinsed down with clean water. The tiles were then left to dry with the aid of a Turbo Air blower to help speed up the drying time.

Encaustic Floor Tiles Before Cleaning Encaustic Floor Tiles Before Cleaning

Sealing Encaustic Floor Tiles

Once the tiles were dry I applied five coats of Tile Doctor Seal and Go which is a water based protective sealer that doesn’t give off any odour and produces a nice low sheen the customer was looking for.

Encaustic Floor Tiles After Cleaning

The final result was one happy customer with a clean easy to maintain tiled floor and two clean rugs as well.
 
 
Source: Cleaning and sealing Encaustic floor tiles

Removing Limescale from Mosaic tile and Stone

This property in London N6 had been rented out previously by the owners and they were now renovating it before moving back in, this work included a wet room which had glass mosaic floor tiles and a dark Basalt tile laid on the wall. The main problem had been a general lack of maintenance over the years which led to a major unsightly build-up of lime scale throughout the wet room. We agreed to do the work but had to explain to the client how difficult the work would be and set their expectation for only an eighty percent improvement. I must apologise in advance for the quality of some of the photographs on this page, the size of the room, low lighting a nature of the stone surfaces didn’t lend themselves well to being photographed.

Mosaic Tiled Floor and Basalt Tiles Before Mosaic Tiled Floor and Basalt Tiles Before

Day 1 -Cleaning Basalt and Mosaic Tiles

Having protected all the chrome furnishings within the wet room we started to soak the Basalt tiled walls with Tile Doctor Grout Clean-Up followed by scrubbing and rinsing constantly with clear water. Grout Clean-up is an Acid based product so you do need to take care when doing this however it is particularly effective at shifting mineral deposits like Limescale. When we were satisfied this had removed the majority of soap scum and lime scale we proceeded to clean the Glass Mosaic floor tiles using the same method.

Day 2 -Polishing Basalt wall Tiles

The basalt tiled walls now needed to be restored back to their original factory condition using small diamond encrusted burnishing pads attached to a hand held polishing machine. We started with a coarse pad which removed any remaining Limescale which had impregnated the surface of the stone and moved onto the finer pads which polish the stone. Once this was complete the tiles were given a final clean with Tile Doctor Neutral Cleaner which is an everyday cleaning product designed for regular use on stone or sealed tiled surfaces.

Day 3 -Sealing Basalt wall Tiles

We came back on the third day and after making sure the Basalt tiles had dried we gave it a final buffing to restore the stone to a deep high gloss shine. The last step was to seal the Basalt tile in order to protect it and make it easier to clean in the future and for this we applied three coats of Tile Doctor Colour Grow which is an impregnating sealer that soaks into the pores of the stone.

Finally we used a rotary floor polisher fitted with a white buffing pad to buff the mosaic glass floor to a high shine.

Mosaic Tiled Floor and Basalt Tiles After Mosaic Tiled Floor and Basalt Tiles After

 
 
Source: Dealing with Limescale issues on Tile in London

Pamment Tile Cleaning

This Pamment tiled hall was in a Grade II listed former Manor House in the village of Creeting St Peter, there were three areas of floor requiring attention two having being recently laid and the other the original floor. Similar to Terracotta, Pamment tiles are made from Clay and have been traditionally used throughout Norfork and Suffollk.

pamment tiles before cleaning pamment tiles before cleaning

Cleaning Pamment Tiles

I started the job using a solution of Tile Doctor Pro-Clean, which is a heavy duty cleaner ideal for stone, tile and grout. The cleaner was diluted with water and left to soak into the Pamment tile and grout for about 10 minutes before being scrubbed in with a black pad fitted to a rotary machine. The soiled solution was then removed with a wet vacuum and washed down with clean water to neutralise the floor of any chemical; we repeated this process a couple of times and we also used a stiff hand brushes to clean up the grout lines. Once happy the floor was given a final rinse and left to dry overnight, A dehumidifier was left running to ensure that the floor would be dry enough to seal the next day.

Sealing Pamment Tiles

The next day came back to do the sealing and after checking the floor had dried sufficiently proceeded to seal it . Tile Doctor Seal and Go was used to seal the floor, it’s a water based sealer so it doesn’t give off an odour when it’s drying and also offers durable stain protection together with a low sheen finish which enhances the look of the tile. Like Terracotta Pamment tiles are very porous and took seven coats of sealer r before it was fully sealed.

pamment tiles after cleaning pamment tiles after cleaning

The work took two days in all and now the floor is much easier to maintain.
 
 
Source: Pamment Tiles Cleaned in Suffolk