This customer in Newton Heath, just outside of Manchester, used to have a beautiful polished travertine floor on most of the ground floor and bathroom but over time it was getting duller and duller as the polish became worn down, not helped I might add by their choice of cleaning products which were not appropriate for this type of floor. Additionally, numerous cracks and holes had appeared in their floor and worried it was going to get worse they decided to call in some professional help and get the whole floor fully restored.
When I got the call I went over to the house to take a in-depth look at the problem and recommended that the floor was burnished using diamond pads of different grades. They also asked if I could apply the same treatment to the travertine bathroom floor and shower cubicle as well, which I was very happy to do so we agreed a price and scheduled a date to do the work.
Dull Travertine Floor Cleaning/Polishing
To start the burnishing process, I applied the Coarse 400 grit burnishing pad to the floor using rotary machine and water as lubrication to break down and remove any old sealer from the stone. When finished with first burnishing pad I removed all the soiled water left on floor with a wet vacuum. This removal process of soiled residue was repeated after each use of a burnishing pad.
Next, I moved on to the Medium 800 grit pad which is less coarse, but still rough enough to break down layers of ingrained dirt. I followed this up with the application of a Fine 1500 grit pad, which started to smooth down the rough areas of the surface to prepare the floor for a final polish with 3000 grit. However before moving straight on to the final of the four pads, I took the time to carefully fill in the all the small cracks and holes in the stone, before leaving the floor to dry until the next day.
Sealing Travertine Floor
The next morning, I returned to the property to finish off the floor restoration. As soon as I arrived I used a damp tester to make sure the floor was completely dry.
All was well so I went over the floor with the final Very Fine 3000 grit burnishing pad, this time without any water lubricant, to finally achieve a high quality polished finish.
For polished floors, we recommend the use an impregnating sealer that penetrates the pores of the stone rather than sitting on the surface of the floor, as this ensures the quality of the polish isn’t damaged. With this in mind I applied Tile Doctor Colour Grow to seal the tiles. This is a colour enhancing sealer that provides durable surface protection and allows the surface to breathe whilst enhancing the natural colours in the stone. At this point it’s important that any sealer that doesn’t penetrate the stone is removed by polishing it off with a cloth.
After this I went on to repeat the cleaning, polishing and sealing process on their Travertine Tiled shower cubicle but I’ll detail that in a separate post.
Needless to say, the customer was very happy with the work carried out on the floor and shower cubicle and recommended me to his neighbour straight away.