Although most of the work we do involves floor cleaning you should know we also cover stone worktops in Kitchens and countertops in bathrooms. An example being this opulent bathroom with Marble countertops that surrounded the sink and bath.
The bathroom was installed at a house in the up-market area of Bowden which together with the villages of Hale and Hale Barns are regarded as being the wealthiest parts of Greater Manchester. The customer had got in touch to ask if we could restore the appearance of the Marble surrounds which had become dirty and etched through general use.
Restoring the Appearance of Marble Countertops
My first job was to protect the wood panelling and lush red carpet that surrounds the bath, once all was protected we started to use a set of tile doctor six-inch burnishing pads to clean the Marble and restore the polish.
The Burnishing pads come in a set of four and are applied to the stone with a little water in sequence from the coarse 400 grit pad which removes etching and then through the medium 800-grit, fine 1500-grit and finally the very fine 3000-grit pad which restore shine to the Marble. I use a hand-held buffing machine to do this and carefully rinse in-between each pad to remove the small amount of slurry which is generated.
The last 3000-grit pad is applied with just a spay of water using what we call a spray burnish technique, this also has the benefit of leaving the stone dry which is exactly how we need it for the next step in the restoration process which is applying a sealer.
Sealing Marble Countertops
To finish off the restoration, I proceeded to seal the Marble tops with Tile Doctor Ultra Seal which is an impregnating sealer that soaks into the pores of the stone protecting it from within. I should add, Ultra Seal is a natural look sealer that doesn’t change the colour of the stone.
The sealer is applied with a soft cloth, left for five minutes and then the excess is polished off with a soft cloth. We also replaced the silicone sealant around the bath and wash basins and once we were finished the bathroom looked newly installed.
The customer was over the moon that we brought life back to her impressive bathroom.
Professional Marble Vestibule Polishing in Cheshire
Rough Slate is notorious for homeowners to maintain as dirt can quickly become trapped in the rough surfaces. The example on this page is that of Brazilian Semi Riven Slate installed in the Kitchen of a house in the village of Hornby, which while naturally cleft from the rock loses none of its texture and style and yet has a much smother appearance than the typical rough Slates from China. Less processing means it’s not quite completely smooth but it is a lot less expensive to buy than say a honed or polished Slate which is more difficult to maintain due to various polishing techniques required to keep up the appearance. Brazilian Slate is in fact one of my favourite slates to clean and also one of the most rewarding of Slates to seal as the sealer really does bring out the colour and character of the stone.
Sealers provide a protective barrier on natural stone floors and without it dirt can penetrate into the pores of the stone making it more and more difficult to clean effectively. Unfortunately on this floor the new homeowners were unaware on what sort of Stone it was and had no idea how to look after it which resulted in the sealer wearing down prematurely and the floor becoming dull and un-inviting.
Cleaning Black Semi-Riven Brazilian Slate Tiles
To restore the appearance of the Slate floor we started by taping up the edges of the new kitchen units to protect the wood from splashing. This was followed with an application of a strong dilution of Tile Doctor Pro-clean worked in with a black buffing pad fitted to a buffing machine running at slow speed (working at a slower speed results in less splashing). The pads can struggle to reach the edges and corners so these were cleaned by hand.
Once we had finished on the main floor area we then concentrated on the grout using a steam cleaner and more Pro-clean scrubbed in with a narrow stiff brush.
Last step of the cleaning was to rinse the floor with water to remove any trace of cleaning products from the Slate and then dried off the floor the best we could with our high wattage wet vacuum machine and left the floor to dry off naturally over night.
Sealing Black Semi-Riven Brazilian Slate Tiles
The next day we returned to seal the floor checking first that the floor had completely dried. The customer had requested a matt finish however we have worked on Brazilian Slate many times before and we knew how good they can look with this Satin finish sealer. Naturally its the customers decision so we offered to do a test piece and let them decide if they didn’t like it we would strip off the test piece and apply a Matt finish sealer like Tile Doctor Colour Grow instead.
The floor was dry so a couple of coats of Tile Doctor Seal and Go were applied to one Tile so that they could appreciate how it would look. Luckily the customer agreed with us and so we set about sealing the whole floor with Seal and Go.
To speed up the drying process Air Blowers were installed as we worked and it wasn’t long before the sealer was dry and the customers were able to walk on the floor and inspect every area before we left. I’m please to report that they were over the moon with the floor and my recommendation of sealer.
To maintain the slate tiles going forward we always give our customers a free bottle of Tile Doctor pH neutral tile cleaner, which is a little incentive for them to provide some feedback via our website.
Professional Semi Riven Slate Floor Renovation in Lancashire
Getting the best out of a natural stone floor isn’t straight forward and we often get calls from customers who have come to the realisation they need help. An example of this being a lady from the village of Helsby who got in touch after her husband had given up following spending two days cleaning their Limestone tiled kitchen floor but actually making it worse.
Burnishing and Cleaning a Limestone Tiled Floor
On arrival the first step was to give the floor a general clean with a focus on cleaning the grout lines and removing any grit from the floor. I used a dilution of Tile Doctor Pro-Clean which is an alkaline tile cleaning product that is safe to use on grout and stone. The cleaning solution was applied by sponge mop and left to soak for ten to twenty minutes before being scrubbed in along the grout line using a stiff narrow brush to get them really clean. Once done the floor was then rinsed with clean water and the now soiled cleaning solution removed with a wet vacuum.
The next step was to use a set of Tile Doctor burnishing pads to polish the stone back to a deep shine. The pads which are encrusted with industrial diamonds are applied with a rotary floor buffer in sequence from coarse to extra fine. The first pad has a Coarse 400 grit which is applied with only water for lubrication, removes minor scratches, sealers, and the top surface dirt. Working in small areas, I applied the pad across the Limestone, rinsing in between and picking up the soiled solution with a wet-vac machine. I then repeated this same procedure with the Medium 800 grit pad which is the first stage polishing pad again rinsing with water after use. The next two pads are a Fine 1500 grit and Extra Fine 3,000 grit which really build up a high-quality polish on the stone.
Sealing a Limestone Tiled Floor
The floor was left to dry off fully overnight and I returned the next day to seal the Limestone first checking with a damp meter that the stone was dry. The customer wanted a natural look finish to the Limestone, so to seal the tiles I applied two coasts of Tile Doctor Ultra Seal which is an impregnating sealer doesn’t change the look of the stone in anyway. Ultra Seal is an impregnating sealer that works under the surface by occupying the pores in the stone thus preventing dirt from becoming ingrained.
Once the sealer had dried the floor was treated to a gentle buff with a white pad to bring up the shine even further. Once complete the stone looked a lot healthier and the grout looked much cleaner.
Professional Limestone Floor Polishing in Cheshire
Although expensive Marble is a highly coveted, popular and classic flooring choice, not only is it hard wearing you can attain a high polish that simply looks fantastic. At peak condition, it’s one of the most beautiful and eye-catching types of stone available, however it’s appearance will degrade over time and with use, so it does need maintaining.
This customer, who lives in the small village of Willington in Cheshire had contacted us because they were concerned that the lustre on their Marble tiled floor which had been installed throughout much of the ground floor had faded and lost its attractive appearance. We arranged a date to go over and re-polish the floor back to health.
Burnishing and Cleaning a Marble Tiled Floor
On arrival the first step was to give the floor a general clean using a mild dilution of Tile Doctor Pro-Clean which is an alkaline tile cleaning product that is safe to use on Marble. I mention this because there are many cleaning products on the market today which are acidic and really only meant for use on Vinyl and Ceramic tiles. The cleaning solution was applied by sponge mop and left to soak for ten to twenty minutes with a particular focus on the grout lines. I used a stiff brush along the grout lines to get them really clean and then once done the floor was then rinsed with clean water and the now soiled cleaning solution removed with a wet vacuum. This process also has the added advantage of removing any grit from the floor which might cause scratching during the next stage which was to polish the floor.
The next step was to use a set of Tile Doctor burnishing pads to polish the stone back to a deep shine. The pads which are encrusted with industrial diamonds are applied with a rotary floor buffer in sequence from coarse to extra fine. The first pad has a Coarse 400 grit which is applied with only water for lubrication, removes minor scratches, sealers, and the top surface dirt. Working in small areas, I applied the pad across the Marble, rinsing in between and picking up the soiled solution with a wet-vac machine. I then repeated this same procedure with the Medium 800 grit pad which is the first stage polishing pad again rinsing with water after use. The next two pads are a Fine 1500 grit and Extra Fine 3,00 grit which really build up a high-quality polish on the stone.
Sealing a Marble Tiled Floor
The floor was left to dry off fully overnight and I returned the next day to seal the Marble first checking with a damp meter that the stone was dry. To seal the Marble tiles I applied two coasts of Tile Doctor Colour Grow which is an impregnating sealer that works by occupying the pores in the stone thus preventing dirt from becoming ingrained. Colour Grow also has the added advantage of enchasing the natural colours in the stone and in this case brought out the deep brown colours in the Marble.
Once the sealer had dried the floor was treated to a gentle buff with a white pad to bring up the shine even further.
Professional Marble Tiled Floor Polishing in Willington
This Limestone tiled floor in Twickenham, Middlesex had only been laid eighteen month earlier. However, due to an in-effectual seal on the floor, the soil had accumulated and embedded into the pores of the stone. Limestone like many types of natural stone is a very porous stone and it doesn’t take much for the dirt to build up and start to discolour the floor.
The tile had been laid through out the Kitchen and adjacent dinning area and the solution was quite straight forward and simply required and a good clean and re-seal as detailed below.
Cleaning Limestone Tiles
We started with an application of a strong dilution of Tile Doctor Pro-Clean which was sprayed onto the floor and allowed to dwell for five to ten minutes. Following this, we used a heavy duty floor scrubbing machine in order to break the soil away and existing sealer from the stone.
Once we were happy that the soil and sealer had been dislodged, we then removed all of the chemical and soil via our extraction machine. This applies pressured water onto the stone whilst vacuuming all of the waste away, leaving the floor as clean and fresh as it could possibly be.
Sealing Limestone Tiles
After allowing the floor to dry out overnight, we returned the next morning to apply the seal. Two coats of Tile Doctor Colour Grow sealer were applied to give the best protection possible. Colour Grow penetrates into the pores of the stone protecting it from within whilst also enhancing its natural colours and contrast.
Once done the floor looked like it had just been laid and the customer was extremely happy with the end result.
Re-Sealing a Limestone Tiled Kitchen and Dinning Floor in Middlesex