Victorian Tiled Hallway Floor Renovated in Swansea


This is a great example of a classic Victorian Tiled Hallway and shows just how hard wearing and durable these floors are. The floor had been installed at a house in Swansea what must have been well over a hundred years ago and was now very badly soiled however I knew from experience that with the right techniques and products they can be given a new lease of life.

Victorian Tiled hallway floor before cleaning Swansea

We mainly use diamond burnishing pads on original Victorian tiles these days, the alternative is to use cleaning products however that method tends to use a lot of water and can aggravate an issue known as efflorescence whereby salts from the sub floor are carried up through the tile as moisture evaporates leaving white salt stains on the surface of the floor. This is not a problem with modern floors as they are usually have a damp proof membrane installed under the floor which prevents damp.

Deep Cleaning Victorian Hallway Tiles

To restore the appearance of the Victorian tiles I started with the application of a coarse 200-Grit diamond encrusted burnishing pad which cuts through the dirt and removes surface staining. The pad is run over the tiles using water to lubricate and then the floor rinsed afterwards to remove the soil that is generated. The soil is then extracted off the floor with a wet vacuum. This is then followed up with a 400-Grit pad which cleans and restores the surface which is left roughened after the application of the coarse 200-grit pad, again the pad is applied with water and then the flor rinsed afterwards to remove the soiling and the water is extracted using a wet vacuum.

The next step was to give the floor an acid wash using Tile Doctor Acid Gel, the acid neutralises the alkaline mineral salts in the floor and reduces the chance of efflorescence occurring, After being scrubbed into the floor the gel is rinsed off the floor using water which is then quickly extracted with the wet vacuum.

The floor was left to dry off overnight and I came back the next day to apply the sealer.

Sealing Victorian Floor Tiles

Before starting the sealing process it’s important to check the floor is dry first for which I use a hand-help damp tester. I find it’s a good idea to take readings from various parts of the floor before I start a job so I can establish a normal background level for the floor.

All was well so the floor was sealed using a couple of coats of Tile Doctor Colour Grow which is an impregnating sealer that works by occupying the pores in the clay tile thus preventing dirt from becoming ingrained there. This particular sealer also enhances the natural colours in the tile and is fully breathable which is important in these situations where you need moisture to evaporate through the tile and not become trapped underneath where it could work its way into the walls of the house.

Victorian Tiled hallway floor after cleaning Swansea

It’s worth knowing that if you do experience effluence salts which are more likely in the damp winter weather, then they can be mopped off the floor before they harden without any damage to the sealer itself.

 

Victorian Tiled Floor Rejuvenated in Glamorgan



Source link

Dirty Terracotta Floor Tiles Cleaned and Sealed in Hales


How the Terracotta floor tiles at this property in the Village of Hales, Norfolk became quite so comprehensively dirty in so short a time, we will never know. We were contacted by the new owner, a lady who had become so distressed by the state of the floor in the house she had recently bought that she was seriously considering ripping up the entire area of tiling and replacing it. Remarkable particularly because the property had been restored only a couple of years ago, the kitchen and hallway being laid with new terracotta tiles.

The entire surface was deeply ingrained with soiling and the pointing lines were filthy, despite there being evidence of some kind of topical sealer having been applied at the time of installation. It quickly became obvious during testing that the sealer had been applied very sparingly and had mostly worn away, leaving a badly compromised fluid and soiling resistance with a dull and dirty finish which refused to clean up when mopped.

Terracotta Tiled Kitchen Floor Before Cleaning Hales

Deep Cleaning Terracotta Floor Tile in Hales

The tiles turned out to be made of a fairly soft terracotta which meant that we were able to deep-clean them extremely effectively using a strong dilution of Tile Doctor Pro-Clean (one part Pro-Clean to two parts water). A strong dilution was required to remove what remained of the old sealer in the less used areas and strip the surface back to the bare tile.

The Pro-Clean was left to soak into the floor for about ten minutes before being worked in using our heavy rotary machine fitted with a black scrubbing pad. The resulting slurry being power rinsed and vacuumed away with our 400psi Ninja machine. All the dirt and virtually all of the old sealer was removed at this stage; the remaining patches around the edges of the area being finished by hand with a 200-grit hand-held burnishing block. The pointing lines were then cleaned by hand with neat Pro-Clean and an angled grout brush.

Finally, the deep-seated oil stains in front of the cooker were brought out using Tile Doctor Oxy-Gel which was left to dwell on the marks for an hour before being agitated with a diamond burnishing pad and rinsed away with the Ninja machine. The floor was then left to dry thoroughly overnight with assistance from our dehumidifier.

Sealing Terracotta Floor Tile in Hales

Owing to the softness and consequently high porosity of the substrate, we realised that it could take up to ten coats or more of our chosen sealer in order to achieve the level of shine our client had requested so that the daily mopping would be effective.

Our usual solution to enable us to complete the work in one day would be to apply a coat of penetrating Tile Doctor Colour Grow sealer to the tiles first, followed by up to five coats of topical sealer which would provide the finish, but because our client loved the new lighter colour of the cleaned tiles, Colour Grow was not an option as it is designed to enrich and thereby slightly darken the colour.

The solution therefore was to apply a single coat of Tile Doctor Ultra-Seal which, like Colour Grow, is a solvent-based penetrating sealer but doesn’t alter the colour of the material. This was followed by five coats of Seal & Go to further improve the fluid resistance and provide the mid-sheen finish required.

Terracotta Tiled Kitchen Floor After Cleaning Hales

At the end of the job we had a very happy client whose actual words were: “thank you so much for restoring my faith in my floor!”
 
 

Renovating Terracotta Floor Tiles in Norfolk



Source link

Restoring a Beautiful Slate Tiled Kitchen Floor in Silkstone, Barnsley


The owner of this house in Silkstone, which is a village situated in the foothills of the Pennines a few miles West of Barnsley, had inherited this Kitchen Slate floor from the previous owner of the house and in the years, they’d lived at the house they hadn’t done anything with the floor. Slate tiles are beautiful but like any natural stone you really need to maintain the sealer if you want them to stay that way, once the sealer wears off dirt can penetrate the pores of the stone resulting in a floor that always looks dull and dirty.

Slate Tiled Kitchen Barnsley Before Cleaning

In this case of this Slate floor the sealer had worn off many years prior and a thick layer of grime had built up on top of what was once an amazing looking floor. Stone floors never come with a care guide and the process of degradation happens so slowly, so you can understand how this could happen over time.

Slate Tiled Kitchen Barnsley Before Cleaning

Cleaning Dirty Slate Kitchen Tiles

Before starting I protected the wooden kitchen units from splashing using plastic sheeting. Next step was to soak the tiles in a strong dilution of Tile Doctor Remove and Go and Pro-Clean combined into a strong cleaning and stripping cocktail. The solution was left to dwell for ten minutes before being scrubbed in using a black scrubbing pad fitted to a rotary floor machine running at slow speed to break through the grime and the sealers and oils that the previous owner had used on the slate.

The pad is good at scrubbing the tiles but struggles to get into the grout so after the tiles were scrubbed I followed by running a stiff brush along the grout lines to give them a thorough clean.

The soiled cleaning solution was rinsed off the tiles with water and then extracted off the floor using a wet vacuum. With the floor clear it was inspected, and problem areas re-treated using the same process.

Once I was satisfied that the Slate and the Grout was clean and clear of old sealers I gave the whole floor a final rinse to remove any trace of cleaning products and then dried as much as possible using the wet vacuum. The floor was then left to dry out fully overnight.

Sealing Kitchen Slate Tiles

Returning to the property the next day, I ran some quick damp tests to check for any excess moisture that might have prevented me from sealing the floor. We will always do this as excess moisture can affect the sealer curing.

Our client had previously decided that they liked the look of our High Shine Sealer due to how it brings the stunning colours of the Slate out. High Shine Sealer is a specially formulated water-based blend of acrylic polymers that provides both a stain resistant surface seal and a durable high-sheen finish. Four coats of sealer were applied and when the customer arrived home later that day they were totally blown away by the floor and how amazing it looked.

Slate Tiled Kitchen Barnsley After Cleaning Slate Tiled Kitchen Barnsley After Cleaning

 
 

Rejuvenating a Multicoloured Slate Tiled Kitchen Floor in Yorkshire



Source link

Dull Encaustic Tiled Hallway Floor Renovated in Berkhamsted


I had an enquiry from a client in the London commuter town of Berkhamsted who had a beautiful Encaustic tiled floor in their hallway which was in need of cleaning. Encaustic tiles are made from layers of cement that are hydraulically compressed to make a very hardwearing surface that can then be decorated. The result is an easy to clean hardwearing surface that is ideal for high traffic areas such as hallways.

Encaustic Tiled Hallway Before Cleaning Berkhamstead

Encaustic tiles however are micro-porous so do need to be sealed to prevent dirt from becoming ingrained in the tiny holes. The tiles at this property in Berkhamsted had been sealed at some point in the past but over the years the sealer had worn down lettering dirt enter the pores making it difficult to clean effectively. The floor now required a deep clean and seal to bring back the life into this artistic floor pattern.

Encaustic Tiled Floor Cleaning

We first removed what was left of the old sealer and ground in dirt using a coarse 400 grit Red burnishing pad attached to a rotary floor buffer. The burnishing pads we use are encrusted with industrial diamond and are applied using water for lubrication, once the pad has been run over all the tiles the floor is rinsed with more water which is then extracted with a wet vacuum to remove the slurry that is generated.

The coarse pad was the followed by a medium 800 grit burnishing pad which is the first step in restoring the appearance of the tiles and is applied and rinsed off using the same process as the 400 grit. The 800 grit pads is followed by the 1500 grit pad which is the second step In restoring the appearance of the tile. Again, the pad is applied with water to lubricate and the floor given a good rinse afterwards.

The next step was to get the grout clean which was done by applying Tile Doctor Pro-Clean which was left for ten minutes before being scrubbed in by hand with a narrow stiff brush. The floor was then given yet another rinse and then dried with the wet vacuum to remove the dirt that was generated from the grout.

The last step in the cleaning process was to run over the floor with a very fine 3000 grit pad, this last pad is the final step in restoring the appearance of the tile and is applied dry with only a little water that is sprayed on using a technique we like to call spray burnishing.

Encaustic Tiled Floor Sealing

Once the floor was dry it was sealed using two coats of Tile Doctor Colour Grow which is an impregnating sealer that seeps into the pores of the tile protecting it from within. This sealer has the added advantage of enhancing the existing colours in the tile improving its overall appearance. The overall process worked incredibly well and made a huge difference to the floor as you can see in the final photograph.

Encaustic Tiled Hallway After Cleaning Berkhamstead

To keep Encaustic floor tiles in first class condition I recommend the use of the Tile Doctor Neutral Tile cleaner which being pH neutral does not reduce the life of the sealer and is ideal for the cleaning of all types of sealed floors. The product comes in a concentrated form, so I recommend it’s used in a mild 1-30 dilution spray applied and wiped over with a microfibre flat mop, then buffed dry.
 
 

Encaustic Tiled Hallway Floor Renovation in Hertfordshire



Source link

Mexican Terracotta Kitchen Rejuvenated in Redditch


A customer in Redditch had recently had a new kitchen fitted and prior to that had tried to seal the Mexican Terracotta tiled floor themselves, however they were not happy with the results, so they contacted Tile Doctor to see if an improvement could be achieved. The sealer they used was matt which didn’t show off the Terracotta at its best and the tile and especially the grout were not as clean as they could have been. Getting the tile and grout clean before sealing is essential otherwise you end up sealing in the dirt.

Mexican Terracotta Tiles Before Resealing Redditch Mexican Terracotta Tiles Before Resealing Redditch

To get the best from the floor I recommended stripping off the sealer, giving the tile and grout a deep clean and then resealing with a satin sealer. The customer agreed and keen to get his new kitchen looking its best booked me in to do the work.

Mexican Terracotta Tiles Before Resealing Redditch

Cleaning Original Victorian and Mexican Terracotta Tiles

My first tasks was to protect the new kitchen units from splashing with plastic sheeting and by removing the kick boards. Once done I began the process of removing the existing sealer by applying Tile Doctor Remove and Go which as the name implies is a strong coatings remover that safe to use on Tile and Stone. The product was dilated with water, applied to the tile and grout and left to soak in for about ten minutes. The floor area between the kitchen units was quite tight so on this occasion I decided to scrub the tiles with a deck brush and hand brush as opposed to using a rotary machine fitted with a scrubbing pad. The Remove and Go did the job and the sealer was removed and the floor rinsed off with water to reveal the original tiles.

Mexican Terracotta Tiles During Stripping Redditch Mexican Terracotta Tiles During Stripping Redditch

The next step was to give the Terracotta tile and grout a deep clean by scrubbing in a medium dilution of Tile Doctor Pro-Clean. Mexican Terracotta can be difficult to clean due to the makeup of the tile, but the Pro-Clean scrubbed in with the brushes I used earlier worked well. The now soiled cleaning solution was rinsed off with water and then extracted using a wet vacuum.

The customer had laid some new tiles to fit in with the new units but asked me to grout them so with time to spare before leaving for the day I grouted them in with a flexible grout and polished off any grout smears. It’s important that tiles are dry before sealing so the floor was then left for two days so it could dry out.

Sealing a Mexican Terracotta Floor

Upon my returned to seal the tiles I first checked with a damp meter that they had indeed dried. All was well, so I began the process of applying Seal and Go which is a water-based sealer from the Tile Doctor range that leaves the satin finish the customer wanted, also being water based it doesn’t leave a smell as it dries. Mexican Terracotta is notoriously very porous, so numerous coats of seal are required and in fact this floor needed eleven coats. I applied a few more coats to the new tiles so they would blend in better with the existing tiles.

Mexican Terracotta Tiles After Resealing Redditch Mexican Terracotta Tiles After Resealing Redditch

The customer was very pleased with the results and I left them with a bottle of Neutral Tile Cleaner to help maintain the tiles appearance going forward.
 
 

Stripping, Cleaning and Sealing Mexican Terracotta Floor in Redditch



Source link

Soiled Yellow and Black Victorian Quarry Tile Restoration


These Yellow and Black Quarry tiles are though to be original feature of this Victorian house in Reading and the owner was keen to get them renovated. The tiles were in basement of the house and over the years the tiles had suffered from water damage due to various small floods, they were now heavily soiled and the most challenging task would be to remove a large build up of mortar and cement.

Yellow and Black Quarry Tiles Before Cleaning Reading Yellow and Black Quarry Tiles Before Cleaning Reading

I ran a test clean in a corner of the smallest room to demonstrate the cleaning process and although confident I could significantly improve the appearance of the Quarry tiles. I had to explain to my customer that due to the years of neglect the outcome would not be perfect, however the test clean went well and the customer was happy with the outcome so booked me in to do the work.

Yellow and Black Quarry Tiles Before Cleaning Reading

Soiled Quarry Tile Cleaning

The first issue to tackle was to remove the dirt and ingrain soil which I did by scrubbing in a strong mix of Tile Doctor Pro-Clean which is a strong tile and grout cleaner. The solution was left to soak in before ten minutes before being agitated with a black scrubbing pad fitted to a rotary machine. I then rinsed off the now soiled cleaning solution off using a hot water truck mounted extraction system.

Yellow and Black Quarry Tiles During Cleaning Reading

Now the ingrained dirt was taken care of, the most difficult task was to remove the cement/mortar built up that was covering a high percentage of the tiles. I did this using a combination of Tile Doctor products including Grout Clean-Up, Acid Gel and 50,100 grit diamond pads. I started with Grout Clean-up but found that Acid Gel worked better on this occasion. To deal with stubborn areas I left the Acid Gel to dwell overnight covered with plastic sheeting so it wouldn’t dry out.

The Acid Gel worked wonders and I was able to complete the cleaning process when I came back the next day giving the floor another rinse with the hot water extraction system. With the quarry tiles now clear I able to do a final spot check and used hand held burnishing blocks and very coarse 50 grit milling pad followed by a 100 grit diamond pad and another rinse to finish it off.

Quarry Tile Sealing

After leaving the floor to dry out over the weekend it was ready to be sealed. We had agreed on giving the Quarry Tiles a matt finish so I used three coats of Tile Doctor Colour Grow which is a fully breathable colour enhancing sealer that works well on old clay tiles.

Yellow and Black Quarry Tiles After Cleaning Reading Yellow and Black Quarry Tiles After Cleaning Reading

I’m happy to say the floor turned out very well considering its condition, certainly my customer was very happy with the outcome and left the following feed back on the Tile Doctor Feedback system.

“Fantastic job – completely revived our Victorian cellar tiles, the before and after photos accurately show the difference the work has made! Also impressed by Dennis’s communication and responsiveness to our needs with the work”.

Yellow and Black Quarry Tiles After Cleaning Reading
 
 

Professional Restoration of old Victorian Quarry Tiles in Berkshire



Source link

Screed Covered Quarry Tiled Floor Renovated in Coulsdon


Pictures below of a Quarry Tiled floor that a customer had discovered when taking up the lino at her house in Coulsdon. Realising the floor was original and worth saving she contacted Tile Doctor and I popped round to take a look.

A lot of the tiles had been covered in a screed to provide a flat base for the Lino and that would need removing. In order to be sure what treatments would work to remove the screen and successfully restore the Quarry tiles without causing any damage I ran a couple of tests and everything seemed ok.

Quarry Tiled Floor Before Renovation Coulsdon Quarry Tiled Floor Before Renovation Coulsdon

We could both see the job wasn’t going to be easy and would take some days to complete so I worked out a price which was accepted and we agreed a date for the work to start.

Quarry Tiled Floor Before Renovation Coulsdon Quarry Tiled Floor Before Renovation Coulsdon

Removing Screed from Quarry Tiles

The Quarry tiles in the WC hadn’t been covered in Lino so they would just need a good clean and seal so the main work would be in the Hallway and Kitchen. Fortunately my customer was having a lot of other work done in the house and was in the middle of stripping the walls so I didn’t need to worry too much about protecting the skirting boards etc.

Working in sections I soaked the screed in water and then carefully chipped away at it until it came loose, it was slow work but I could see the process was working as expected and eventually all the Quarry tiles were revealed. There was still a lot of cement from the screed stuck to the surface of the tile so after sweeping up the chippings I set to work applying a strong solution of Tile Doctor Grout Clean-up to the tiles and leaving it to soak in for a short while. Grout Clean-Up is an acidic product that we normally use for removing grout smears from the surface of tiles. The solution was scrubbed in and then rinsed off with water and extracted with a wet vacuum.

Quarry Tiled Floor During Renovation Coulsdon Quarry Tiled Floor During Renovation Coulsdon

To get the tiles in the toilet clean I gave them a good scrub with Tile Doctor Pro-Clean which is a reliable and effective Tile and Grout cleaner. Once clean they were rinsed with water and dried with the wet vacuum.

Sealing Quarry Tiles

I had timed my visit between working being carried out at the property so I was able to leave the floor for a few days so it could thoroughly dry out. I returned later to check the Quarry tiles were dry and completed the renovation by sealing the floor with Tile Doctor Seal and Go which is a water based sealer that works really well on Quarry tiles. Five coats of Seal and Go were needed to fully seal the tiles and the floor now looks transformed.

The owner was very satisfied with the improvements and before leaving I advised to cover the floor before starting the decorating work.
 
 

Old Quarry Tiles Restored in Coulsdon, Surrey




Source link

Brazilian Grey/Green Semi-Riven Slate Floor Hornby Kitchen


Rough Slate is notorious for homeowners to maintain as dirt can quickly become trapped in the rough surfaces. The example on this page is that of Brazilian Semi Riven Slate installed in the Kitchen of a house in the village of Hornby, which while naturally cleft from the rock loses none of its texture and style and yet has a much smother appearance than the typical rough Slates from China. Less processing means it’s not quite completely smooth but it is a lot less expensive to buy than say a honed or polished Slate which is more difficult to maintain due to various polishing techniques required to keep up the appearance. Brazilian Slate is in fact one of my favourite slates to clean and also one of the most rewarding of Slates to seal as the sealer really does bring out the colour and character of the stone.

Sealers provide a protective barrier on natural stone floors and without it dirt can penetrate into the pores of the stone making it more and more difficult to clean effectively. Unfortunately on this floor the new homeowners were unaware on what sort of Stone it was and had no idea how to look after it which resulted in the sealer wearing down prematurely and the floor becoming dull and un-inviting.

Semi-Riven Slate floor Before Cleaning Hornby Semi-Riven Slate floor Before Cleaning Hornby

Cleaning Black Semi-Riven Brazilian Slate Tiles

To restore the appearance of the Slate floor we started by taping up the edges of the new kitchen units to protect the wood from splashing. This was followed with an application of a strong dilution of Tile Doctor Pro-clean worked in with a black buffing pad fitted to a buffing machine running at slow speed (working at a slower speed results in less splashing). The pads can struggle to reach the edges and corners so these were cleaned by hand.

Once we had finished on the main floor area we then concentrated on the grout using a steam cleaner and more Pro-clean scrubbed in with a narrow stiff brush.

Last step of the cleaning was to rinse the floor with water to remove any trace of cleaning products from the Slate and then dried off the floor the best we could with our high wattage wet vacuum machine and left the floor to dry off naturally over night.

Sealing Black Semi-Riven Brazilian Slate Tiles

The next day we returned to seal the floor checking first that the floor had completely dried. The customer had requested a matt finish however we have worked on Brazilian Slate many times before and we knew how good they can look with this Satin finish sealer. Naturally its the customers decision so we offered to do a test piece and let them decide if they didn’t like it we would strip off the test piece and apply a Matt finish sealer like Tile Doctor Colour Grow instead.

The floor was dry so a couple of coats of Tile Doctor Seal and Go were applied to one Tile so that they could appreciate how it would look. Luckily the customer agreed with us and so we set about sealing the whole floor with Seal and Go.

To speed up the drying process Air Blowers were installed as we worked and it wasn’t long before the sealer was dry and the customers were able to walk on the floor and inspect every area before we left. I’m please to report that they were over the moon with the floor and my recommendation of sealer.

Semi-Riven Slate floor After Cleaning Hornby Semi-Riven Slate floor After Cleaning Hornby

To maintain the slate tiles going forward we always give our customers a free bottle of Tile Doctor pH neutral tile cleaner, which is a little incentive for them to provide some feedback via our website.
 
 

Professional Semi Riven Slate Floor Renovation in Lancashire



Source link

Victorian Tiled Hallway Rebuilt After Heating Installation in Palmers Green


The owners of this property in Palmers Green, North London had uncovered an original Victorian hallway floor during renovation work. However, the priority was to have a new central heating system installed so they had to make a decision to allow the heating engineer to rip up part of the floor in order to lay new pipes.

With the floor now missing a large section most customers would agree to have the hole back-filled with concrete and then have lino installed on top, however keen to have the floor restored as an original feature they reached out to Tile Doctor who have a lot of experience in this field.

Our brief was to infill the excavated section and reinstate the floor with new original style Victorian tiles to match the existing ones.

Victorian Tiled Hallway Before Cleaning Palmers Green

Deep Cleaning a Victorian Tiled Hallway

The existing floor had been covered in Carpet which had been secured using carpet gripper fixed to the floor using adhesive, there were also old paint splashes from decorating that would need to be removed. Our first job therefore was to remove the glue and paint by applying a strong dilution of Tile Doctor Remove & Go which is a coatings remover especially designed for use on tile and stone. The product was applied, left to dwell for about twenty minutes and then scrubbed into the floor, this softened the paint and glue which could then be carefully scrapped off tile tiles.

The next step was to give the floor a deep clean with a strong solution of Tile Doctor Pro-Clean to strip off what remained of old sealers and extract any ground-in dirt from the pores of the tile. Naturally this work had to be done in two sections due to the missing tiled section and then once complete each part of the floor was given a good rinse and the slurry extracted using a wet vacuum.

The floor was then inspected and a second clean was carried out to remove any stubborn staining or residue followed by a steam clean.

Rebuilding a Victorian Tiled Hallway

Following the two stages of cleaning we checked the existing floor pattern and prepared the hallway by levelling the floor in preparation for inlaying the new tiles which were chosen to offer the best possible match. We were able to source reclaimed tiles that would match up to the pattern and during this phase of the restoration work we carried out any loose tile and grout repairs and re-grouted the newly laid tiles.

Sealing Victorian Hallway Tiles

With the original tiles clean and the hallway rebuilt we left the floor to dry off fully overnight.

On our return we first checked the tiled were dry and that the grout in the new section was clear of any grout smears from the tiling work. Happy with the condition of the hallway we first applied a coat of Tile Doctor Colour Grow which is an impregnating sealer that will protect the tiles from within by occupying the pores within the tile, it also enhanced the colours in the clay tile.

Once the first coat of sealer was dry it was followed by five coats of Tile Doctor Seal & Go which adds further layers of protection and adds a nice subtle satin finish that works really well on Victorian tiles.

Victorian Tiled Hallway After Cleaning Palmers Green

The work went very well, and the sealer consolidated the new and old tiled sections to form a seamless floor.
 
 

Victorian Tiled Hallway Restored in North London



Source link

100+ Year Old Terrazzo Hallway Rejuvenated in Dudley


This post follows on from the Victorian Tiled floor article I published earlier, if you recall I was asked to restore a Victorian Tiled Hallway at a house in Dudley and there was a section that was Terrazzo, so I thought it would make sense to write about this separately as the cleaning method is different.

Both period floors were original, having been installed when the house was built over 100 years prior and whilst Victorian tiles are quite the norm in these properties it’s quite unusual to find Terrazzo as this was mostly used in large public buildings.

There was a crack running across the floor which is quite a common problem with Terrazzo as it’s laid in one piece like concrete and any movement in the ground will cause stress leading to a crack. Unfortunately, the only way to resolve this properly is to have a Terrazzo expert relay that section of the floor which would prove expensive.

Terrazzo Hallway Floor Before Cleaning Dudley

Terrazzo is the by-product of broken pieces of stone, often Marble, Limestone and Granite, which rather than being wasted are set into to a cement screed and poured onto the floor, then once the screed is set it is grinded to a polish.

Cleaning Original Victorian and Terrazzo Tiles

The polish on Terrazzo will eventually wear down with use and to restore the appearance it needs to be burnished with a series of pads with different grits from coarse to fine.

So, to start the renovation I gave it a general clean with Tile Doctor Pro-Clean mainly to remove any grit before burnishing. Next, the Terrazzo tiles were cleaned using a coarse 400 grit pad fitted to a rotary machine and lubricated with water. This process removes dirt and any coatings such as sealers and the floor needs to be rinsed afterwards to remove the slurry that is generated.

Then to build back the polished appearance, the floor is burnished with an 800 grit medium pad followed by a 1500 grit fine pad. Less water is used this time, but you do need to rinse the floor again after each pad to remove any slurry gets generated during the process. Once this was done the floor was dried with a wet vacuum and left to dry off fully overnight.

Sealing a Terrazzo Floor

The next day, I returned to the property and started with a damp test to make sure the floor was dry and ready for sealing. The floor was dry so I finished the Burnishing process by applying the last pad in the set which is a 3,000 grit (very fine) pad that adds the final polish to the Terrazzo.
To protect the floor from staining and dirt becoming ingrained in the pores of Terrazzo it was then sealed with two coats of Tile Doctor Colour Grow which is a colour enhancing impregnating sealer that protects from within. Once the sealer had dried the floor was buffed with a white pad.

Terrazzo Hallway Floor After Cleaning Dudley

The floor looked a lot cleaner and shiner at the end and the customer was very happy with the transformation.
 
 

Deep Cleaning and Polishing an Old Terrazzo Floor in Dudley



Source link

Smoke Damaged Shower Cubicle Renovation in Ayr


Below are a few photos of a smoke damaged shower cubicle where we were asked by an insurance company to restore the tiles following a house fire in the town of Ayr. Just south of Prestwick airport on the South West Coast of Scotland, Ayr is built along the river of the same name and dates all the way back to 1205.

You can see from the photograph below that the tiles how bad that smoke damage was. When we arrived work had already started to strip out the electric shower and screen removing a strip of tiles in the process. It was also clear that someone had also attempted to clean the ceramic tile and grout but had given up after realising how much work was needed.

Smoke Damanged Shower Tiles Before Restoration Ayr

Cleaning Smoke Damaged Tile and Grout

We had to give the tile and grout several deep cleans using a strong dilution of Tile Doctor Pro-Clean which was sprayed on, left to dwell for a while and then scrubbed in by hand. On reflection Oxy-Gel might have been a better product for the job as it has the same active ingredients but comes in a gel form which allows it to stick to vertical surfaces resulting in longer dwell times.

We managed to successfully remove all the smoke and soot from the surface of the tile and grout with this process. However although the grout was now clean I could see it was going to need more work if it was going to pass muster.

Smoke Damanged Shower Tiles During Restoration Ayr

Grout Colouring

To overcome the grout issue I decided to colour it with a White grout colourant; this was a perfect time to apply the colourant as the Pro-Clean had prepared the grout joints and would make a good bond with the colourant. I used three coats of white grout colourant in the end, each one applied by hand with a small brush. The colourant is basically painted on top of the existing grout and any excess wiped off the adjacent tile before it dries. It’s an epoxy based formula that becomes a long-lasting barrier protecting the grout and making it much easier to clean.

Following this I cleaned the tiles down again, this time with Neutral Tile Cleaner and then turned my attention to the stained silicone sealant around the base of the shower tray which was cut out and replaced with fresh new white silicone.

I gave the shower tray a clean as well and the final result was a very fresh looking shower cubicle which will soon back in action once the other trades finish their installations.

Smoke Damanged Shower Tiles After Restoration Ayr
 
 

Ceramic Tiled Shower Cubicle Restored Following Fire in Ayrshire



Source link

Terracotta Tiled Floor Refurbished in Amersham Council Building


A local cleaning contractor called us in to work on the Terracotta tiled floors at a council building in Amersham. The Terracotta had not been deep cleaned and resealed for about ten years and the sealer had worn off leaving the tile vulnerable to dirt becoming ingrained in the pores of the tile. The grout had also suffered the same fate and had almost gone black in many areas.

Terracotta Floor Files Before Cleaning Amersham Council Offices

This is a common problem with Terracotta which is quite porous and once those pores become ingrained with dirt the tile becomes difficult to clean effectively. The solution is to seal the tile however sealers wear off over time and this was basically the problem.

Terracotta Floor Files Before Cleaning Amersham Council Offices

After discussing the issues we agreed on a plan of action to deep clean the Terracotta tile and grout and then re-seal to protect it. Due to the busy nature of the building we agreed to do the work between Christmas and New Year when we knew the building would be empty.

Cleaning Old Terracotta Floor Tiles

We started by applying a strong dilution of Tile Doctor Oxy-Gel which is a strong tile cleaning product that being in a gel form ensures it sits on the tile for longer, giving it a longer effective dwell time so it can really eat into and loose the dirt. After approximately twenty minutes the gel was scrubbed into the tile with a black scrubbing pad fitted to a rotary machine. This broke down most of the dirt and removed any remaining sealer. Once the whole floor had been treated in this manner it was rinsed thoroughly with water which was then extracted using a wet vacuum.

With the soiled cleaning solution removed I could see the next step would be to spot clean stubborn staining and clean the grout. For this task I used a strong dilution of Tile Doctor Pro-Clean scrubbing it in by hand using stiff brushes and aided with a hand-held steamer to help treat the stubborn staining. Once done the floor was given a final rinse and then as much moisture as possible removed with the wet vacuum.

Sealing Old Terracotta Floor Tiles

We then left the floor to dry off completely and came back a couple of days later to seal the Terracotta tile.

I mentioned earlier that Terracotta is porous; in fact it’s probably the most porous material I deal with, so to fully seal the floor I had to apply eight coats of Tile Doctor Seal and Go which will provide complete and long lasting protection against staining and dirt. Seal and Go also adds an appealing satin sheen to the tile and the new seal will make it much easier to clean in future.

Terracotta Floor Files After Cleaning Amersham Council Offices

The floor tile and grout now look much healthier and I’m sure the council will be very impressed when they go back to work after the holidays.

Terracotta Floor Files After Cleaning Amersham Council Offices

Happy New Year…
 
 

Professional Terracotta Tiled Floor Renovation in Buckinghamshire



Source link

Renovating Travertine Kitchen Floor Tiles in Sanderstead


This customer, who lives in Sanderstead located between Croydon and Purley in Surrey had been experiencing difficulties in keeping her beautiful Travertine tiled kitchen floor in good condition. Over the years it had suffered from a heavy build up of dirt and oily stains, not to mentioned a number of cracks and small holes. Needless to say, the customer was keen to have the Travertine tiles and grout renovated and made easier to keep clean.

Travertine Kitchen Floor Before Cleaning Sanderstead Travertine Kitchen Floor Before Cleaning Sanderstead

Restoring Travertine Flooring

To begin the renovation, I applied Tile Doctor Remove and Go across the entirety of the large tiled area. This heavy duty remover breaks down any old sealers and other coatings, leaving the area ready to cleaned or, in this case, burnished.

Burnishing is a method for cleaning and polishing certain types of high-end stone, including Travertine, Marble, and Limestone. Our burnishing system involves the application of four diamond encrusted pads of varying grits. Firstly, I applied the Coarse grit pad, which helps to break down any dirt and stains on the surface of the tiles. Then, I worked my way through the Medium, Fine, and Very Fine pads, using a little water which acts to lubricate the process gradually building the polish on the Travertine. The floor is rinsed with water between the application of each pad to remove the soil that is generated and also give a final rinse at the end before leaving to dry.

To round off the first day of work, I filled any cracks and holes in the Travertine using a colour matching resin which greatly improved the look of the tile.

Travertine Kitchen Floor Cracked Tile Before Repair Sanderstead Travertine Kitchen Floor Cracked Tile After Repair Sanderstead

Sealing Travertine Tiles

The following day I returned to the property to seal the tiles checking first that the floor had dried. I use a moisture meter to do this and it confirmed the floor was dry so I proceeded to seal the floor using our colour intensifying impregnating sealer Tile Doctor Colour Grow. Once that was dry, I added the finishing touches by buffing the floor with a soft white buffing pad. As you can see from the photographs, the combination of a fresh seal and polish worked wonders.

Travertine Kitchen Floor After Sealing Sanderstead

We did such a good job with the floor that the customer asked if we could also improve the appearance of their natural stone fireplace which was suffering from bad rust and oil stains however I do a separate write up on that.

Travertine Kitchen Floor After Sealing Sanderstead
 
 

Cracked Travertine Tiled Kitchen Floor Fully Restored in Surrey



Source link

Deep Cleaning and Sealing a Beautiful Slate Tiled Kitchen Floor in Spencer’s Wood


Slate tiles do look incredible but like any natural stone you really need to maintain the sealer if you want them to stay that way. Unfortunately it’s usually the case that the sealer wears off overtime especially in the high foot traffic areas such as Kitchens and within a few years the tiles become dull with ingrained dirt.

This process happens so gradually it goes un-noticed until the floor becomes difficult to keep clean and a decision is made to have it sorted out. This was certainly the case with this Semi Riven Multicoloured Slate tiled kitchen floor at a house in the Berkshire village of Spencer’s Wood. The floor had been installed about fifteen years prior and over the years the Slate had become soiled to the point where domestic cleaners weren’t having any effect.

Slate Tiled Kitchen Floor Before Cleaning Spencers Wood Slate Tiled Kitchen Floor Before Cleaning Spencers Wood

Cleaning Dirty Slate Kitchen Tiles

To begin the restoration I soaked the tiles in a strong dilution of Tile Doctor Remove and Go and left it to dwell for about twenty minutes re-applying extra solution when it had dried. Remove and Go is our go to product for removing old coatings such as in this case sealers, although much of the old sealer had worn off it was still present in the less busy areas of the floor and to get an even final result I needed to ensure all of it was removed. Once the old sealer had started to weaken I agitated the product using a black pad fitted to a rotary buffing machine. The rotary pad struggles to reach into the recesses of the grout lines so I also made sure to scrub the solution into the grout with a grout brush.

Slate Tiled Kitchen Floor During Cleaning Spencers Wood Slate Tiled Kitchen Floor During Cleaning Spencers Wood

I suspect there were multiple layers of sealer on this floor that had been applied over the years as some areas were proving particularly stubborn. Something stronger was going to be needed particularly in the grout lines. So I applied Tile Doctor HBU remover; HBU stands for Heavy Build-Up and allowed this to dwell for thirty minutes while I cleaned other areas.

Once I was satisfied that the Slate and the Grout was clean and clear of old sealers I gave the whole floor a rinse with water using a wet extraction machine. One the soiled cleaning solutions were removed you could really see the difference that the combination of cleaning products had made.

Slate Tiled Kitchen Floor During Cleaning Spencers Wood

The final step in the cleaning process was to give the floor an Acid Wash using a mild solution of Grout Clean-up which removes any surface grout (aka grout smears) and other mineral deposits from the slate to ensure they true beauty of the stone will be visible. Once this was removed the whole floor was rinsed with water to remove any trace of product and then dried as much as possible. After a final inspection the floor was left overnight to dry off fully.

Slate Tiled Kitchen Floor During Cleaning Spencers Wood

Sealing Slate Kitchen Tiles

Returning to the property the next day, I ran some quick damp tests to check for any excess moisture that might have prevented me from sealing the floor. We will always do this as excess moisture can affect the sealer curing.

Slate Tiled Kitchen Floor During Sealing Spencers Wood

The customer was very happy with the clean and the floor was dry so we discussed sealer options to find out their preference for Matt or Satin finish. With the decision made to go with a Satin finish I began the application of the Tile Doctor Seal and Go which enhances the look of the stone with an aesthetically pleasing low-sheen finish, as well as providing on-going protection against ingrained dirt and staining.

Slate Tiled Kitchen Floor After Sealing Spencers Wood Slate Tiled Kitchen Floor After Sealing Spencers Wood

A total of five coats of Seal and Go were needed to seal the Slate tiles and as you can see from the photos the sealer really put the life back into the floor.
 
 

Rejuvenating a Semi Riven Multicoloured Slate Tiled Kitchen Floor in Berkshire



Source link

Victorian Tiled Hallway Floor Renovated for a Property Investor in Burnley


A property investor contacted Tile Doctor to see if we could help renovate a property that was to be sold in few weeks’ time. To get maximum value from the investment she wanted to preserve the character and period features of the house including the Victorian Tiled Hallway floor, which as you can see from the photograph below was in need a bit of TLC!.

Victorian tiled floors and other period features have become very popular in recent years and are often discovered under hallway carpets covered in years of dirt. Fortunately, they are very resilient and with the right techniques and products can be restored back to their former glory.

Victorian Tiles Before Renovation Burnley

On our initial visit I conducted a survey of the floor to check its condition and work out the most suitable products and methods to employ to restore it. One of the main concerns we have with these old floors is damp as damp-proof membranes were not invented until relatively recently. I have a damp meter to check for this and it did indicate high moisture levels which isn’t really an issue for cleaning the floor but would restrict our choice of sealer to those which are fully breathable and allow moisture to rise-up through the tile. We agreed a price and schedule with the customer and within two weeks we were able to start the work.

Cleaning an Original Victorian Tiled Hallway Floor

The floor was in quite a state, made worse I suspect by recent restoration work by other contractors who unfortunately didn’t take as much care with the floor as the could have done.

After protecting the skirting boards and carpets with film work got underway starting by applying a strong dilution of Tile Doctor Remove and Go to the floor to strip away old sealers and other coatings. This product also helps to break down the paint stains on the surface of the tile, though I also used a handheld scraper, as well as a rotary machine fitted with a black scrubbing pad, to speed up the process. The resultant slurry was rinsed off the floor with water and extracted using a wet vacuum.

With the floor clean of coatings, the next step was to deep clean the tiles with a medium dilution of Tile Doctor Pro-Clean which is an effective Tile and Grout cleaning product that deeply cleans away ingrained stains. Again, we used a black scrubbing pad fitted to a rotary machine to make the job easier. Corners were tough to tackle with a machine, so we had to do them by hand.
The floor was given a final rinse to remove any soil and trace of cleaning product and the wet vacuum was used a final time to extract as much moisture out of the floor as possible. Upon finishing the cleaning, we left the floor for a few days, so it could dry out fully.

Dealing with Efflorescence

When we came back to seal the floor we noticed problems with white salt deposits coming to the surface of the tile a problem known as efflorescence. I had suspected this might become an issue but there was no indication of it happening before so was not overly concerned at the time. However, it meant I could not seal the floor as planned until the efflorescence had been dealt with. Fortunately salts like these can be treated and to resolve the problem I gave the floor a wipe with a solution of Tile Doctor Acid Gel which is a blend of phosphoric and hydrochloric acids in a gel form, formulated to remove grout haze (grout smears) and treat efflorescence. Once this was done the floor was given a light rinse and dried again.

Sealing an Original Victorian Tiled Hallway Floor

I left the floor to dry again for a few more days and on my return, I was pleased to see the problem had not resurfaced and I was able to complete the restoration with the application of a sealer.

To seal the tiles, I used a couple of coats of Tile Doctor Colour Grow, which is a penetrating sealer designed to soak into the pores of the clay thus preventing dirt from becoming ingrained whilst additionally enhancing the colours in the tile. The sealer really deepened the colours in the tile bringing them to life and with Colour Grow being fully breathable there shouldn’t be any issues with damp becoming trapped under the tile and causing issues later.

The customer was delighted with the results (see feedback below) and the work we did should more than pay for itself when the house goes on the market.

“Thoroughly impressed with Kamila, she was so lovely, professional and thorough! Our tiles look amazing and I was especially happy with how quick she sorted that floor out from the first email I sent. Janice M., Burnley”

Victorian Tiled After Renovation Burnley
 
 

Professional Restoration of an Old Victorian Tiled Hallway in South Lancashire



Source link

Beautiful Black and White Victorian Tiled Hallway Renovation in Monmouth


This beautiful black & white Victorian tiled hallway was recently discovered hidden under carpet at a house near Monmouth. As well as the years of grime that had become ingrained in the tile, the carpet had been secured with carpet grippers which had been fixed on top of the tiles and the owner was keen to recruit my help in its restoration.

It’s a lovely drive up through the Wye Valley from my base in Caldicot to the town of Monmouth which has a long history that goes back to the Roman times. In fact it’s famous for its “Monnow Bridge” which dates back to medieval times and is the only remaining stone gated bridge of its type left in Britain. Needles to say it has a strong mixture of architecture with many old houses built during Victorian times.

Victorian Floor Before Renovation in Monmouth

Cleaning an Original Victorian Tiled Hallway Floor

The first step in cleaning the floor was to prepare it for cleaning by carefully removing the old carpet grippers and adhesive deposits using a handheld scraper. This was followed by creating a mixture of two powerful cleaning products namely Tile Doctor Remove and Go and NanoTech HBU remover. Remove and Go is a coatings remover designed to strip off old sealers whilst NanoTech HBU is a powerful Heavy Build-Up Remover that uses tiny abrasive particles to clean up tile and stone.

The floor was smothered in the cleaning solution and it was allowed to soak into the tile for about twenty minutes before scrubbing it in. It was not an exceptionally large hallway so a lot of hand scrubbing was required to get the floor as clean as possible. The cleaning solution was rinsed off with water and then extracted using a wet vacuum or wet vac as my colleagues often refer to it.

To finish off the cleaning process I scrubbed a dilution of Tile Doctor Pro-Clean into the grout lines to get them as clean as possible and then gave the floor a final rinse. I need the floor to be dry before sealing so using the wet vac I extracted as much moisture from the floor as possible.

Sealing an Original Victorian Tiled Hallway Floor

I left the floor to dry completely overnight and returned the next day to finish the floor off with a few coats of sealer. On my arrival I started by taking a few reading with a damp meter to ensure the floor was ready to be sealed. Fortunately by efforts with the Wet Vac the night before had paid off and it confirmed the tiles were dry and ready to be sealed.

To do this, I used multiple coats of Tile Doctor Seal and Go which works really well on Victorian Tiles and adds a nice low sheen that brings them up nicely. Naturally the sealer not only improves the way they look it also makes them much easier to clean and will protect them against ingrained dirt and staining.

Victorian Floor After Renovation in Monmouth

I think you will agree this old floor has been transformed and now has a new lease of life.
 
 

Professional Renovation of a Carpet Covered Original Victorian Tiled Hallway in Monmouthshire



Source link

Renovating an Original Edwardian Tiled Hallway to Peak Condition in Chippenham


Edwardian-style tiled floors are very much of a likeness with Victorian-style tiled floors, both typically being made of encaustic cement and styled in painted in geometric patterns. The main difference, of course, is that Edwardian tiles are a main feature of Edwardian-era houses (1901-1910), while Victorian tiles are found in slightly older properties.

As with many Victorian tiled floors, we’ve found that Edwardian tiled floors have commonly been hidden away for many years under carpet or some other form of covering. These hallway Edwardian tiles, at a property in Chippenham, had been covered by carpet for 30 years. Upon removing the carpet, we could see why – the hallway was covered in paint splashes, decades’ worth of dirt and, of course, adhesive stains from the underlay.

Edwardian Tiled Hallway Covered in Carpet and Before Restoration in Chippenham Edwardian Tiled Hallway Covered in Carpet and Before Restoration in Chippenham

My task was to restore the hallway floor back to its peak condition, when it was first installed over a century ago.

Edwardian Tiled Hallway UnCovered Before Restoration in Chippenham Edwardian Tiled Hallway UnCovered Before Restoration in Chippenham

Cleaning an Original Edwardian Tiled Hallway Floor

The first step of the restoration was to ensure the walls surrounding the hallway were protected. I did this by applying a protective film around the edges of the room. Next, I removed all the old carpet grippers and adhesive deposits manually using a handheld scraper.

Edwardian Tiled Hallway Prepared for Restoration in Chippenham

Tile Doctor Remove and Go was then applied to the floor to strip away any old sealant, which certainly by now was no longer effectual. This product also helped to break down the paint stains on the surface of the floor, though I also used a handheld scraper, as well as a rotary machine fitted with a black scrubbing pad, to speed up the process of removing both the sealant and the paint.

Edwardian Tiled Hallway During Restoration in Chippenham

To complete the cleaning process, I applied Tile Doctor Acid Gel, which is a blend of phosphoric and hydrochloric acids in a gel form, formulated to remove grout haze (grout smears) and treat efflorescence which is the formation of white salts on the surface of the tile.

Sealing an Original Edwardian Tiled Hallway Floor

I left the floor to dry completely overnight after installing air movers to assist with the process. These older properties do not typically have damp-proof membrane installed, which makes damp issues a real possibility. Upon returning to the property the following day, I ran some damp tests, and thankfully the tiles proved dry and ready to be resealed.

To do this, I used one coat of Tile Doctor Ultra-Seal, which is a penetrating sealer designed for maximum stain protection. I then also added four coats of Tile Doctor Seal and Go to provide the customer with the low-sheen, highly quality finish he desired.

He was so impressed with the outcome that he left the following glowing review on the Tile Doctor feedback system:

“Tile Doctor did an excellent job, starting from a very dirty and paint covered surface. The hallway floor now looks fantastic, just like it was a century ago. I’m pleased to recommend Cambridge Tile Doctor.”

Edwardian Tiled Hallway After Sealing in Chippenham
 
 

Professional Restoration of a Carpet Covered Original Edwardian Tiled Hallway in Cambridgeshire



Source link

Old Flagstone Tiled Kitchen Floor Renovated at a Stacksteads Cottage near Backup


The pictures below were taken in the Kitchen of a charming cottage situated in the village of Stacksteads near the town of Backup, North of Manchester in the district of Rossendale. The flagstone floor was over 100 years old and the customer was unhappy with their appearance. They had tried to clean/mill and seal themselves a few years ago and had found the process hard work and very time consuming. This time round they decided to ask professional applicator at Tile Doctor for help.

Old Flagstone Tiled Kitchen Floor Before Renovation in Stacksteads Backup

We had conducted a small patch test so we could show possible results to the customer. They had also advised us that they felt the stained areas of grout was beyond cleaning and would probably need replacing. However replacing the grout would have been quite an expensive option so instead of replacing we suggested deep cleaning the grout lines during the renovation process.

Old Flagstone Tiled Kitchen Floor Before Renovation in Stacksteads Backup

The customers were happy with the results of the patch test so the job was booked in.

Deep Cleaning Old Flagstone Flooring

On our return visit we set about deep cleaning the flagstones using a strong dilution Tile Doctor Pro-Clean worked in using a Black Scrubbing pad fitter to a rotary cleaning machine. This action certainly gave the floor a good clean and removed the old sealer but some stains were proving stubborn to shift so we tried a stronger product called Remove and Go combined 50/50 with NanoTech HBU which add nano-sized abrasive particles to the mix.

We left the resulting formula to soak into the stone for a while and then scrubbed it into the floor with a stiff brush paying particular attention to the grout lines. This did the trick and so we then removed the now soiled and dirty cleaning products with a wet vacuum and washed down the floor with clean water to remove any trace of product and neutralise the floor before sealing. We then left for the evening so the floor could dry out fully overnight.

Old Flagstone Tiled Kitchen Floor During Renovation in Stacksteads Backup

Sealing a Flagstone Tiled Kitchen Floor

We came back the next day and tested the floor with a damp meter in a few different locations to make sure no dampness remained in the stone. The Flagstone was dry so we proceeded to seal the floor with a couple of coats of Tile Doctor Colour Grow which penetrates into the pores of the stone protecting it from within and enhancing the natural colours of the stone.

Old Flagstone Tiled Kitchen Floor After Renovation in Stacksteads Backup

The beautiful colours of blue and dark sand were showing after sealing with Colour Grow which is the best sealer for stone floors. Certainly the customer was very happy with the results and left the following 5 star review!

We could not praise Kamila enough. Our flagstone floor was in desperate need of some TLC. She was punctual, thorough and completely professional. Throughout the whole process she invited me to see the progress and to keep me informed of what she was doing. She also gave us good advice on how to clean and care for our stone floor. The end result is fabulous and we are absolutely delighted. We would definitely recommend Kamila to anyone.
Jo H, Bacup

Old Flagstone Tiled Kitchen Floor After Renovation in Stacksteads Backup
 
 

Old Flagstone Kitchen Floor Cleaned and Sealed in South Lancashire



Source link

Traditional Terracotta Kitchen Floor Renovated in Welwyn Garden City


The pictures below were taken at a beautiful Hertfordshire Lodge located on the outskirts of Welwyn Garden City where the traditional Terracotta Kitchen floor had lost its appeal and was now in need of renovation.

Welwyn Garden City is actually a new town that was created in the 1920 with an aim to create a modern garden city, the architecture is therefore fairly modern.

Terracotta Lodge Floor Tile Before Cleaning in Welwyn Garden City

Deep Cleaning Kitchen Terracotta Tiles

As usual the first step before starting the cleaning process was to clear the floor of as move furniture as practical and use protective tape to cover the threshold edges, skirting’s and doors and use a protective sheet to the fixed kitchen units.

To deep clean the Terracotta tiles and remove any trace of old sealers and waxes present a strong dilution of Tile Doctor Remove and Go was applied to the floor and left to soak in for about ten minutes. Then the solution was agitated using detail brushes along the grout lines and edges and polypropylene pads.

Once done the now soiled cleaning solution was extracted from the floor using a wet vacuum and the tile and grout rinsed with fresh water.

This process removed most of the dirt and old coatings but more work was required so a further treatment using a strong dilution of Tile Doctor Pro-Clean which is a strong tile cleaner and sealer remove was applied and worked in using an orbital floor machine fitted with a scrubbing pad.

Again the soiled cleaning solution was removed using a wet vacuum and the tile and grout given a steam clean to remove any trace of cleaning product residue. The floor was then left for two days to fully dry out.

Sealing Terracotta Kitchen Tiles

On our return the floor was checked for dampness before we proceeded to seal the floor; sealing damp tiles can result in a patchy finish so this is always worth checking.

To seal we gave the Terracotta tiles a primer coat of Tile Doctor Colour Grow which is an impregnating sealer that brings out the natural colours in the tile and by occupying the pores of the clay tile it stops dirt becoming ingrained. This was then followed by six coats of Tile Doctor Seal and Go which works really well on Terracotta and adds a nice satin sheen finish. The floor now looks much healthier and has really lifted the appearance of the kitchen.

Terracotta Lodge Floor Tile After Cleaning in Welwyn Garden City

Before leaving we advised the customer to avoid commercial acid based cleaning products as these are not appropriate for sealed Terracotta tiles. We suggest using a low alkaline/neutral PH product such as Tile Doctor Neutral Tile Cleaner as this will maximise the life of the sealer and maintain the sheen of the tile.
 
 

Traditional Terracotta in the Kitchen Restored in Welwyn Garden City



Source link