Restoring the Appearance of Victorian Tiled Lobby in Swindon

Victorian tiled floors are a popular feature in period houses and new builds trying to get that classic look. While they originated in the 19th century, they have a certain timeless quality that property owners love. Historically due to their hard wearing qualities they were most commonly used for flooring high traffic areas such as lobbies and hallways, however Victorian tiles are porous and without the correct maintenance the tiles can start to lose their appearance very quickly.

This customer from Swindon has an original Victorian tiled lobby at the front of their house that was suffering from this very same problem. Years worth of ingrained dirt and muck had completely sapped all colour and character from the tiles, and the customer was keen to get them back to looking their best.

Victorian Tiled Lobby Before Cleaning in Swindon

Whilst I was there inspecting the floor I agreed to run a test on the tiles to ascertain the results that could be achieved, this worked out well and the customer quickly booked me to carry out the full restoration.

Cleaning Dull and Dirty Victorian Tiles

To provide the deep clean these tiles desperately needed, I opted to use a strong solution of Tile Doctor Pro Clean. Pro Clean is our go-to cleaner for most natural stone tiles since it is highly versatile. It is alkaline-based and therefore can be used on acid-sensitive tiles to break down ingrained dirt and any existing seal.

We soaked the floor completely with the product and left it to dwell for roughly 15 minutes. This allows the Pro Clean to seep into the pores of the stone, get underneath and lift any ingrained dirt to the surface to be easily removed. I then attached a soft brush to a rotary machine and scrubbed the area throughly, with the tiles coming up very well. Once satisfied with the appearance of the tiles, I removed the dirty cleaning slurry with a wet vacuum and rinsed.

Having removed many layers of muck it came as a surprise to find that there were a number of paint splashes that have previously had been hidden. I was able to promptly remove them using a hand razor scraper, before rinsing the area again several times to remove any surface contaminants and neutralise the area. I then left it to dry fully overnight.

Sealing Victorian Tiles

Upon my return to the property the next day I ran a few damp tests to check for excess moisture in the area. This is really important to check for as excess moisture can cloud the sealer and damage its ability to provide protection for the tiles.

Once satisfied that the floor was completely dry, I sealed the floor with two coats of Tile Doctor Colour Grow. Colour Grow is an impregnating sealer that penetrates into the pores of the stone to act as a robust barrier against ingrained dirt. It also contains colour intensifying properties that really worked to enhance the fantastic coloured patterns of these Victorian tiles.

Victorian Tiled Lobby After Cleaning in Swindon

With a thorough clean and a fresh seal applied, these tiles are now well prepared to endure further wear and tear, which is especially important in this high traffic area of the house. Certainly the customer was relieved and pleased to know that their fantastic Victorian tiles are protected for the long-term. Another satisfied customer for the Wiltshire Tile Doctor.
 
 
Source: Victorian Tile and Stone Restoration Service in Wiltshire

Choosing a Tile Sealer When You Have a Puppy

Here are the details of a job I recently completed in the town of Biggleswade, which lies on the River Ivel in Bedfordshire. My client had a fantastic red and black Victorian tiled floor with a topical seal. However, she also had a new addition to the family in the form of a new puppy and, as I’m sure most of you reading will know, puppies can be very messy and additionally urine contains Uric acid which can eat away at sealers. Therefore, my client asked me to strip off the old topical seal, before replacing with an impregnating sealer better suited to protect the tiles against an untrained puppy.

Victorian tiles Biggleswade before cleaning

My client had been replenishing the topical seal for many years, but after discussing this decided that Tile Doctor Colour Grow, an impregnating and colour enhancing sealer, would be better suited.

Stripping a Victorian tiled floor

My first task was, of course, to remove the old topical sealer. I did this using a strong dilution of Tile Doctor Pro-Clean, which is a high alkaline cleaner that when used in a concentrated form can remove sealers. The alkaline helps to break down the sealer while also lifting out any ingrained dirt suffered by the stone. The solution was left to dwell for approximately twenty minutes before being scrubbing it into the tiles using a rotary machine fitted with a scrubbing pad.

Nonetheless, after giving the tiles a rinse, I discovered evidence of an old impregnating sealer in the tiles that was also need to be removed before resealing. To do this I applied Tile Doctor Remove & Go which is a powerful, dedicated coatings remover which did the job although the use of a steamer and several scrubbing brushes helped with the task.

Victorian tiles Biggleswade during cleaning

After completing the stripping, I still felt that I could improve the appearance of the tiles further, so I ran over the tiles with a small six inch Tile Doctor Diamond encrusted burnishing pad fitted to a hand-held buffer to finish the cleaning process.

Sealing a Victorian tiled floor

After completely the stripping process, I gave the entire floor a rinse and left it to dry for several days. Upon my return I sealed the tiles using two coats of Tile Doctor Colour Grow. This is an impregnating, colour enhancing sealer that really brought out the shades of red and black in these Victorian tiles. Along with Victorian tiles, Colour Grow is also suitable for use of Flagstone, Limestone, Quarry, Sandstone and Marble tiles, amongst others.

Victorian tiles Biggleswade after cleaning Victorian tiles Biggleswade after cleaning

I think you will agree the floor looks transformed with the new sealer applied.
 
 
Source: Victorian Floor Cleaning and Sealing service in Bedfordshire

Builders Clean of a Victorian Tiled Hallway

This customer asked me to pay a visit following work to refurbish the house and wanted to restore as many original features as possible; work had been going on to restore coving, picture rails, ceiling roses and fireplaces but unfortunately nobody had thought to cover up the beautiful Victorian floor. When I arrived there was plaster dust and splashes of paint all over the floor that needed attention. A quote was given which was accepted and the work was booked in for the following week.

Victorian Hallway Tiles Builder Cleaning before in Northampton Victorian Hallway Tiles Builder Cleaning before in Northampton

Cleaning Victorian Quarry Tiles

My first course of action was to vacuum the floor to remove any loose debris so I could assess how to proceed. I then applied diluted Tile Doctor Pro Clean with a pump up sprayer and left it to dwell on the tiles for fifteen minutes before working it in with a black scrubbing pad and hand brushes. The now soiled cleaning solution was then rinsed off together with most of the plaster and surface dirt which had come away in the process. I was then left with a few paint splatters which I removed by spot treating by hand with Tile Doctor Remove and Go; it became clear at this stage that the Pro-Clean had not removed all the old sealer and so I decided to spray the whole floor with a dilution of Remove and Go and work it in with brushes, the solution was left for a further ten minutes and then rinsed away with an extraction machine.

Sealing Victorian Quarry Tiles

The floor was left alone to dry for several days with a fan on site to assist the process. The customer wanted the floor to look traditional and requested a matt finish so when I returned to site two coats of Tile Doctor Matt Colour Grow Sealer was applied. Colour Grow is breathable and will allow any damp to evaporate without disrupting the finish, this is important as floors of this age were laid without any damp proof course or membrane which can sometimes result in damp issues.

Victorian Hallway Tiles Builder Cleaning after in Northampton Victorian Hallway Tiles Builder Cleaning after in Northampton

 
 
Source: Professional Tile, Stone and Grout Restoration service in Northamtonshire

Cleaning Sandstone and Slate Tiles Together

We recently deep cleaned two different tiled floors at a property in the village of Coningsby in the centre of Lincolnshire. The floor was split into two areas one laid with natural Sandstone and the other Riven Slate tiles. Both tiled areas had been sealed previously but the sealer was clearly not doing the job as the floor had a very dull finish due to dirt being absorbed into the tile.

Sandstone Tiled Floor Before Cleaning in Coningsby Riven Slate Tiled Floor Before Cleaning in Coningsby

Cleaning Terracotta Tiles

The floors were in need of a deep clean to remove the ingrained dirt and remaining sealer so the first step was to soak the tiles in a strong dilution of Tile Doctor Pro-Clean and then work it in using a rotary machine fitted with a black pad and a stiff brush along the grout lines. This did the job and there’s a great photograph below that shows the difference this made.

Sandstone Tiled Floor During Cleaning in Coningsby

To extract the now soiled cleaning solution the floor was rinsed using water which was then extracted using our wet pick up system. Once the floor was clear we were able to see where more work was required and the process was repeated until we were happy the floor was thoroughly clean and free of any remaining sealer.

To get the floor dry a number of turbo air dryers were setup around the floor and we left for the day to allow the floor to thoroughly dry off overnight.

Sealing Terracotta Tile

The following morning we tested the tiles to make sure that both were dry which they were. We then applied Tile Doctor quality sealers to both floors; two different finishes were required for the different types of floor so we applied three coats of Colour Grow sealer to the Sandstone flooring as this impregnates the pores in the stone protecting it from staining and enhancing the natural colours to provide a natural look. We than applied four coats of Seal and Go sealer to the Slate floor, Seal and Go adds a nice subtle shine and works well on Riven Slate to highlight the different shades.

Riven Slate Tiled Floor During Sealing in Coningsby

The customer was delighted with the results and left an excellent review which you can read below:
The floors look absolutely beautiful. I am very pleased with the service.
J. Gibbons, Coningsby

She wants us to return soon to seal the other stone areas in their property. As you can see from the photos the before and after is very striking. The floors were ready to take light use that same afternoon.

Sandstone Tiled Floor After Cleaining and Sealing in Coningsby Riven Slate Tiled Floor After Cleaning and Sealing in Coningsby

 
 
Source: Professional Tile, Stone and Grout maintenance service in Lincolnshire

Removing Varnish From Flagstone Floor Tiles

This Flagstone floor was installed in a house near the village of Ambleside and had previously been sealed with varnish and other products which had left the floor looking dull and nowhere near its best. I did a test clean which came out well and then agreed a date and price I came back a couple of weeks later to do the job

Flagstone Tiled Floor Before Cleaning in Ambleside

Cleaning Flagstone Tiles

Due to the numerous coatings that had been applied to the floor it was necessary to completely strip off the coatings back to the bare stone. To start I used Tile Doctor Remove and Go which does what it says on the bottle and removes coatings from tiles, the product was diluted with water and left to soak in before being scrubbed in using a Black Scrubbing pad fitted to a rotary machine. The now dirty cleaning solution was removed using a wet vacuum and I could see that the Remove and Go had removed most but not all of the coatings so it was time to using something stronger. To do this I applied NanoTech UltraClean which is a gel that is left to soak into the floor for thirty minutes before adding water and then agitating with the black pad. The floor was rinsed with water and the solution removed with the wet vacuum. At this point I could see that all the varnish and dirt had been removed so I gave the floor a final wash down with clean water to neutralise the floor before sealing and left for the evening so the floor could dry overnight.

Flagstone Tiled Floor After Cleaning in Ambleside

Sealing a Flagstone Tiled Floor

I came back the next day and tested the floor with a damp meter to confirm the floor was dry and then proceeded to seal the floor with Tile Doctor Seal and Go applied with a paint pad which gave the floor a nice low sheen finish that the customer requested.

Flagstone Tiled Floor After Cleaning and Sealing in Ambleside

 
 
Source: Professional Tile, Stone and Grout maintenance service in Cumbria

Deep Cleaning Old Flagstone Tiles

This flagstone floor was installed in a farmhouse in Caerleon near NewPort, it was actually the original floor dating back to 18th century and had been lifted up by the previous owners and re-laid with underfloor heating and a damp proof membrane, this was good news for me as so often with these old floors you can get damp issues rising up through the stone and consequently it can take a long time to dry out following a deep clean.

Old Flagstones Before Restoration in Caerleon

Cleaning Quarry Tiles

I stripped the sealer off with Tile Doctor HBU (Heavy Build-Up Remover) Ultra-Clean mixed 50/50 mixed with Tile Doctor Pro-Clean to double the cleaning and stripping power and also to thin the HBU out. The old sealer had been applied two years prior when then the floor was re-laid as part of a renovation due to the farm house going on the market for the sale, it had worn through in the heavy traffic areas letting in dirt and now needed to be replaced.

Old Flagstones Before Restoration in Caerleon Old Flagstones Before Restoration in Caerleon

To work the cleaning solution into the floor I used a scrubbing machine with a stiff brush attached cleaning and rinsing as I renovated, the old sealer proved quite tough to shift in some areas so the process had to be repeated until I was satisfied all the old sealer and dirt had been removed.

A lot of the cement joints had broken down which I repointed with fast setting Mapei floor grout colour matched to the original. One small piece of stone had to be replaced by the kitchen unit for which I managed to source a slab from B&Q after a hunt around from various outlets to match the original as best as possible.

Old Flagstone Tile Replacement in Caerleon

Sealing a Quarry Floor Sealing

I left the floor to dry out for two days checking later with a damp meter to ensure it was completely dry before sealing.

Old Flagstones During Sealing in Caerleon Old Flagstones After Restoration in Caerleon

The customer wanted a satin finish as previously sealed so I applied three coats of Tile Doctor Seal & Go which gave the stone floor a nice mild shine and being water based didn’t leave smell whilst it dried.

Old Flagstones After Restoration in Caerleon

 
 
Source: Tile, Stone and Grout Cleaning in Cardiff

Deep Cleaning Victorian Tiled Steps

The photographs below are from a set of steps outside a house near Brighton Marina; the customer had a number of requirements which included bringing the Victorian tiled door steps back to life and also to resolve a leak into the basement below.

Victorian Tiled Steps Brighton Marina Before Cleaning

Cleaning Victorian Tiled Steps

To get them clean we scrubbed in a strong solution of Tile Doctor Pro-Clean brushing off any moss growth in the process and exposing holes and weaknesses. It was a small area so this was done by hand using water to rinse away the soiled cleaning product and a wet vacuum to extract the water. Once the tiles were cleaned all the visible holes and cracks were filled using clear mastic and a builder went about resealing the basement below.

Sealing Victorian Tiles

With winter quickly approaching the weather has changed for the worse and I struggled to find two clear days of dry weather to seal the tiles in fact three weeks passed until it was clear enough to return. I started by wiping away any visible dampness and used the heat gun on any tricky corners. Once dry the tiles were sealed using Tile Doctor Pro-Seal which is a penetrating sealer that soaks into the tile occupying the pores in the tiles so contaminates can’t.

The property was fifty metres from the sea front so I applied four coats to be sure it would have extra protection against the elements; fortunately the weather was quite windy they dried quickly. The customer was very pleased with the result, so much so that she’s recommended me to her neighbours.

Victorian Tiled Steps Brighton Marina After Cleaning

 
 
Source: Tile, Stone and Grout Cleaning in Sussex

Deep Cleaning Terrazzo Tiles

Just to prove we take on any job large or small I thought I would post the details of this small Terrazzo Vestibule that we recently cleaned at the entrance to a house in Glasgow. The Terrazzo was not looking its best which is hardly surprising being in front of the main entrance to the house it must have seen a lot of foot traffic over the years.

Terrazzo vestibule before cleaning in Glasgow

Cleaning and Burnishing a Terrazzo Floor

Terrazzo is a very hard surface and as a result it has to be treated in the same way as other hard surfaces such as Travertine, Limestone and Marble which typically involve burnishing the surface to remove the dirt and restore the appearance.

Before burnishing the floor was cleaned using a strong dilution of Tile Doctor Pro-Clean which was left to dwell on the Terrazzo for a while before being scrubbed in by hand due to it being such a small area; following that the floor was given a quick rinse with water and a quick clean with Tile Doctor Neutral Cleaner to remove any trace of strong cleaning product.

The next step was to burnish the floor using a set of four diamond encrusted burnishing pads. You start with a coarse 400 grit burnishing pad which is run over the surface with a little water to help lubricate and this removes surface dirt and coatings such as sealers. Once that was finished we moved onto the medium 800 grit pad which is the first step of the polishing process and also removes ingrained dirt. The surface of the Terrazzo is still quite rough at this stage so once complete with the medium pad the fine (1,500 grit) is used smooth down the surface and continue to build up the polish in the floor. The last pad is a very fine (3,000 grit pad) and this pad builds on the existing polished effect to create a high shine finish.

All these pads are applied with water and the resultant slurry needs to be cleaned off during the process with the final step of giving the floor a thorough rinse with clean water.

Sealing a Terrazzo Floor

Once the floor was completely dry it was sealed using two coats of Tile Doctor Colour Grow which is an impregnating sealer designed to bring out the natural colours in the stone and penetrate into the pores of the tile preventing dirt from getting in there and providing maximum on-going stain protection. The floor was then buffed using a white buffing pad to bring up the shine further and remove any smears left from sealing.

Terrazzo vestibule After cleaning and sealing in Glasgow

 
 
Source: Tile, Stone and Grout Restoration Service in Glasgow

Removing Soot From a Stone Fireplace

This fireplace at a house at Canford Cliffs near Poole, Dorset and was constructed from a mixture of Limestone and Sandstone, both of which had suffered from ingrained soot damage in the forty plus years since in had been installed. The owners of the property wanted it cleaning up and although we tend to focus on tiles the methods and products we use work equally well on stone fireplaces so I was happy to take it on.

Canford Cliffs Stone Fireplace Before Cleaning

Removing Sealer from Limestone Floor Tiles

The first task was to protect the carpet in from of the fireplace from splashing and any potential mess and then I applied a strong mixture of Tile Doctor “Pro Clean” in warm water. It was left to soak in for a short while before being scrubbed into the stone by hand with a grout brush and a brass coated Spid wire brush which helped to brush away the more ingrained dirt. This took off the majority of the soil from the stone and a further application of Pro Clean was applied which I steamed off using an Earlex steamer and then rinsed thoroughly always taking care to minimise any run off.

Sealing Limestone Floor Tiles

Any stone needs to be bone dry before sealing so I left the Fireplace to dry for two days before returning to seal it using a number of coats of Tile Doctor Seal and Go which sank into the porous stones and enriched their colour as well as protecting them from further staining.

Canford Cliffs Stone Fireplace After Cleaning

The fireplace is now looking like new again and has become a really attractive feature.
 
 
Source: Tile, Stone and Grout Cleaning Service in Dorset

Removing Plaster from Quarry Tiles

This Quarry tiled floor was at a house in the town of Market Harborough and as you can see from the photograph below it was in a right state due to the plastering that had gone on previously while the property was refurbished. The plasterer has taken no steps to protect the tiles and as a result there was plaster and plaster dust ingrained into the tile.

Quarry Tiles Deep Cleaned in Market Harborough Before

Deep Cleaning Quarry Tiles

To clean the floor and remove mess of plaster that it has become covered it the whole floor was soaked in a strong dilution of Tile Doctor Remove and Go which is a strong coatings remover that is safe to use on tile, stone and grout. If was left to dwell on the tiles for around twenty minutes before being worked into the floor with a rotary machine fitted with a black scrubbing pad, the grout was also scrubbed but this needs to be done by hand with a stiff brush. The soiled cleaning solution is then rinsed away using a wet vacuum and the process repeated on stubborn areas until all the tiles were clean. Once I was happy the floor was in an acceptable condition it was thoroughly rinsed with water to remove any cleaning products that might upset the sealer and then left to dry overnight; the wet vacuum was used again to remove the water and help dry the floor.

Sealing Quarry Tiles

We delayed our return until the decorators had painted the walls and unlike the plasterers they protected the floor so we didn’t have to spend time removing paint from the tiles. The tiles were thoroughly dry when we returned and so we got straight on with the task of sealing them with five coats of Tile Doctor Colour Grow which is an impregnating sealer that occupies the pores in a tile preventing contaminates from become ingrained and as its name suggests does a great job of enhancing the colour in the tile.

Quarry Tiles Deep Cleaned in Market Harborough After

 
 
Source: Tile, Stone and Grout Cleaning and Sealing in Leicestershire

Cleaning 100 year old Quarry tiles near Cardiff

This Red Quarry Tiled floor had been laid when the house was built back in 1910 so it was over 100 years old and had years of wear and tear to show for it including old cement and paint from some decorating work that had been done some years prior. The house was located in the town of Treharris just outside of Cardiff and being an original feature of the house the owner wanted it looking as good as it could be.

Red Quarry Tiles Floor in Treharris Before Cleaning

Cleaning a Quarry Tiled Floor

I first checked for any moisture as these old floors were often laid without damp proofing and a damp floor can impact sealing later. Fortunately the reading was nice and dry, I then set about carefully scrapping off as much old paint and cement as possible. I then swept up as much of the dust as I could and caught the rest with a hoover.

The next step was to cover the whole floor in Tile Doctor Remove and Go mixed with a little NanoTech Ultra Clean which basically adds tiny abrasive particles to a powerful coatings remover. I left this on to soak into the tile for about an hour knowing that using this combination would not only remove any old surface coatings such as sealers it would also clean the floor as well. The solution was then worked into the floor using a rotating scrubbing brush attachment on a floor machine effectively letting the machinery do all the hard work. The floor was then rinsed twice with clean water which was then removed using a wet vacuum.

Red Quarry Tiles Floor in Treharris Scrubbed

It was clear at this point that the cement I could see on the surface of the tile was basically grout from an appalling tiling job when the floor was laid 100 years earlier. Fortunately Tile Doctor has a solution for that problem called Grout Remove and Go which is an acid based product that will remove grout and mineral deposits such as efflorescence. Being an acid I had to be careful so it was applied to the tile working one square metre at a time cleaning and scraping as I went along. After each section the floor was given a good rinsing again using the wet vacuum to remove the liquids from the floor. The last step of the cleaning process which I always do for Quarry and Victorian floor tiles was to finish off the rinsing process with a steam clean which brings out any remaining dirt and brings the tile back to its raw state.

Red Quarry Tiles Floor in Treharris Cleaning

Sealing a Quarry Tiled Floor

I cleaned the floor on the Friday and then left it to try for two days coming back on the Sunday to damp test the floor once again to ensure it was ready for sealing. The moisture reading was fine for sealing and as the customer had asked for a mild shine finish I sealed the floor using Tile Doctor Seal and Go which brought out the black and red colours in the tile back to life.

Red Quarry Tiles Floor in Treharris Sealed

 
 
Source: Residential and Commercial Tile Cleaning in South Wales

Refreshing tired flagstone floor tiles

These photographs are of a Flagstone floor tiled floor installed at a house in Glasgow. They were well worn, looking washed out and overdue a deep clean and re-seal, there was also remnants of adhesive and paint and I suspect the floor had been covered in carpet at some point in the past.

Cleaning Flagstones in Glasgow

Cleaning Flagstone Floor Tiles

Working in sections the tiles were covered in Tile Doctor Remove and Go which as the name suggests is designed to safely remove coatings from tiles, this was left to soak in for a while before scrapping off the glue and paint from the stone surface using a wire brush and paint scrapers.

The second step was to scrub the floor using a strong dilution of Tile Doctor Pro-Clean worked in using a rotary bonnet machine fitted with a hard nylon brush attachment. The floor was then then rinsed down with clean water and the soiled solution extracted using and industrial wet vacuum. This process was completed three to four times to ensure all the dirt was removed.

The floor was then left to dry assisted by a turbo air mover and damaged pointing and cracks between the stone was patched up using a sand/cement mortar. The cleaning and repairing process took most of the day so once complete we left for the day leaving the turbo air mover switched on to ensure the floor would be nice and dry of the next day.

Cleaning Flagstones in Glasgow Cleaning Flagstones in Glasgow

Sealing Flagstones

We returned the next day and once we had checked the stone had dried we proceed to seal it using five coats of Tile Doctor Seal and Go which will protect the floor and also adds a nice sheen to the tile.

Cleaning Flagstones in Glasgow

 
 
Source: Residential and Commercial Tiled Floor Cleaning in Glasgow

Restoring a damaged Victorian Tiled hallway in South Wales

This is an original Victorian tiled hallway floor in Cardiff that dated back to when the house was built in the year of 1890. The previous householders of which had a radiator installed serviced by laying pipes right through the middle of the floor destroying the tiles as they went, they then back filled the channel with cement. On top of that many of the other tiles had been splashed with cement and paint.

Abused Victorian Floor Cardiff Before

Repairing Victorian Floor Tiles

My first job was to carefully remove the cement from the channel and to precisely cut back any old cement bedding and old cement grout away from any tile edges in preparation for the replacement tiles which fortunately I was able to get hold of.

Abused Victorian Floor Cardiff Before

After all the previous preparation I started carefully scraping off cement from all around the edges of the remaining tiles as well as gloss and emulsion splashes from the surface essentially giving the whole floor a thorough scrape with a hand held scraper vacuuming up the mess as I worked. Interestingly for a floor of its age I tested the floor in various places for moisture and found it to be perfectly dry.

Cleaning a Victorian Floor

To clean the floor I mixed three parts Tile Doctor Remove and Go with NanoTech UltraClean which basically adds small abrasive particles to a powerful sealer and coatings remover making it even more effective. This was applied to the whole floor and left to soak in for an hour making sure not to let it dry out by applying further amounts; leaving it to dwell for an hour gives it time to eat away at any dirt and coatings on the tile making the scrubbing processes easier.

To scrub the tiles I used a rotary machine fitted with a black scrubbing pad rinsing and extracting the soiled solution along the way. This cleaned up the tiles well however there were still some cement stains so this time Tile Doctor Grout Clean-up was applied to the floor in sections and left to ten minutes to dwell before working it in with another black scrubbing pad and rinsing off. This product is acid based so you can’t leave on the tiles for too long; once I was happy with the final result the whole floor was given a thorough rinse with plenty of clean water using a wet vacuum to extract the waste and dry the floor.

The channel was then filled with cement and once it had set replacement replica Victorian tiles from The Original Tile Company were installed. I then grouted the floor in a medium grey grout let the tiles become solid and the grout go hard before using a steam cleaner to make sure that I have removed all the tile doctor cleaning solutions prior to sealing.

Sealing a Victorian Floor Sealing

The customer wanted a semi-gloss finish so once I had tested the floor again to make sure it was dry I sealed the tiles with Tile Doctor Seal and Go which enhanced the colour of the floor tiles and added a nice sheen.

Abused Victorian Floor Cardiff Completed Abused Victorian Floor Cardiff Completed

As you can see the new tiles fitted beautifully and the old floor tiles cleaned up so successfully the difference is impossible to spot. It was a lot of painstaking work though taking five days to finish but well worth the result.
 
 
Source: Residential and Commercial Tiled Floor Restoration in South Wales

Victorian Tile Maintenance

This was a straight forward request to clean and re-seal a Victorian Minton tiled floor in Coventry. The tiles were in good condition but there were a few stubborn stains that needed dealing with.

Victorian Minton tiles cleaned and Sealed coventry Victorian Minton tiles cleaned and Sealed coventry

Cleaning Victorian Tiles

I used a concentrated dilution of Tile Doctor Pro-Clean to clean and strip the old sealer from the floor. It was first left to soak into the tiles for around 15 minutes before being scrubbed into the Victorian tile and grout using a slow speed rotary machine fitted with a scrubbing pad. The dirty solution was removed and the process repeated and grout lines scrubbed until I was happy the tiles were clean; this was then followed with a thorough rinse with water and a wet vacuum was used to remove the fluids and get the tile and grout as dry as possible. This process took most of the day so once the floor was clean I left for the day leaving it to dry overnight.

Sealing Victorian floor tiles

I came back the next day and after confirming the tiles had dried I began sealing them using six coats of Tile Doctor Seal and Go sealer which will provide stain protection as well as adding a nice shine to the floor. The interesting thing about Seal and Go is that’s it’s a water based sealer so you don’t get a smell as it dries.

Victorian Minton tiles cleaned and Sealed coventry Victorian Minton tiles cleaned and Sealed coventry

 
 
Source: Maitaining Victorian Tiles in Warwickshire

Victorian Tiled Floors in Southport

Southport is an interesting seaside town with many Victorian terraced properties so it came as no surprise when I was asked to maintain a Victorian Tiled hallway in the town.

Cleaning a Victorian Floor Tiles

The floor was in good condition for its age and just in need of a clean and re-seal to keep it looking good, hallway area’s as you can imagine get more footfall than other parts of the house so are more likely to need a regular deep clean.

Victorian Tiles Southport Before Cleaning

To get the floor clean and remove any remaining sealer the floor was sprayed with Tile Doctor Remove and Go which was left to soak into the tile for five minutes before being scrubbed in using a rotary machine fitted with a black scrubbing pad. The next step was to wash off the residue with water which was then removed using a wet vacuum. Following this the tiles were given a rinse in Tile Doctor Grout Clean-up which is an acid based product that can remove grout smears and mineral deposits, it also improves the ability of the sealer to bond with the tile. Last step before sealing was to give the floor a thorough wash down with clean water, which is designed to remove any trace of cleaning products before sealing; the water was removed with the wet vacuum and then left to dry overnight.

Sealing the Victorian Tiled Floor

The next day I returned and checked the floor for dampness using a Damp Meter which indicated the floor was dry and ready for sealing. For Victorian Floor tiles I recommend several coats of Tile Doctor Seal and Go which provides a low sheen finish whilst offering great stain protection.

Victorian Tiles Southport After Cleaning

 
 
Source: Cleaning a Victorian Tiled Floor in Stockport

Maintaining Encaustic floor tiles

On a visit to a customer to a customer in Beckenham, Kent who had a pair of rugs that needed cleaning I was asked to take a look at her Encaustic kitchen floor tiles which had become dull and she couldn’t keep them clean. I carried out a demonstration on how I would clean them and also explained the different sealer options available and how each sealer can have a different effect. She was pleased with the demonstration and engaged me to clean the tiles as well as the rugs specifying a sealer that would leave a sheen on the tile.

Encaustic Floor Tiles Before Cleaning

Cleaning black Porcelain floor tiles

I set about scrubbing the floor using a hot water dilution of Tile Doctor Pro-Clean Tile and Grout cleaner combined 50:50 with NanoTech UltraClean which adds tiny abrasive particles to the solution to make a more effective cleaning product. The solution was worked into the tiles by scrubbing with a rotary machine fitted with a black scrubbing pad and a stiff hand brush was used along the tight grout lines. The soiled solution was removed using a wet vacuum and floor thoroughly rinsed down with clean water. The tiles were then left to dry with the aid of a Turbo Air blower to help speed up the drying time.

Encaustic Floor Tiles Before Cleaning Encaustic Floor Tiles Before Cleaning

Sealing Encaustic Floor Tiles

Once the tiles were dry I applied five coats of Tile Doctor Seal and Go which is a water based protective sealer that doesn’t give off any odour and produces a nice low sheen the customer was looking for.

Encaustic Floor Tiles After Cleaning

The final result was one happy customer with a clean easy to maintain tiled floor and two clean rugs as well.
 
 
Source: Cleaning and sealing Encaustic floor tiles

Removing Limescale from Mosaic tile and Stone

This property in London N6 had been rented out previously by the owners and they were now renovating it before moving back in, this work included a wet room which had glass mosaic floor tiles and a dark Basalt tile laid on the wall. The main problem had been a general lack of maintenance over the years which led to a major unsightly build-up of lime scale throughout the wet room. We agreed to do the work but had to explain to the client how difficult the work would be and set their expectation for only an eighty percent improvement. I must apologise in advance for the quality of some of the photographs on this page, the size of the room, low lighting a nature of the stone surfaces didn’t lend themselves well to being photographed.

Mosaic Tiled Floor and Basalt Tiles Before Mosaic Tiled Floor and Basalt Tiles Before

Day 1 -Cleaning Basalt and Mosaic Tiles

Having protected all the chrome furnishings within the wet room we started to soak the Basalt tiled walls with Tile Doctor Grout Clean-Up followed by scrubbing and rinsing constantly with clear water. Grout Clean-up is an Acid based product so you do need to take care when doing this however it is particularly effective at shifting mineral deposits like Limescale. When we were satisfied this had removed the majority of soap scum and lime scale we proceeded to clean the Glass Mosaic floor tiles using the same method.

Day 2 -Polishing Basalt wall Tiles

The basalt tiled walls now needed to be restored back to their original factory condition using small diamond encrusted burnishing pads attached to a hand held polishing machine. We started with a coarse pad which removed any remaining Limescale which had impregnated the surface of the stone and moved onto the finer pads which polish the stone. Once this was complete the tiles were given a final clean with Tile Doctor Neutral Cleaner which is an everyday cleaning product designed for regular use on stone or sealed tiled surfaces.

Day 3 -Sealing Basalt wall Tiles

We came back on the third day and after making sure the Basalt tiles had dried we gave it a final buffing to restore the stone to a deep high gloss shine. The last step was to seal the Basalt tile in order to protect it and make it easier to clean in the future and for this we applied three coats of Tile Doctor Colour Grow which is an impregnating sealer that soaks into the pores of the stone.

Finally we used a rotary floor polisher fitted with a white buffing pad to buff the mosaic glass floor to a high shine.

Mosaic Tiled Floor and Basalt Tiles After Mosaic Tiled Floor and Basalt Tiles After

 
 
Source: Dealing with Limescale issues on Tile in London

Pamment Tile Cleaning

This Pamment tiled hall was in a Grade II listed former Manor House in the village of Creeting St Peter, there were three areas of floor requiring attention two having being recently laid and the other the original floor. Similar to Terracotta, Pamment tiles are made from Clay and have been traditionally used throughout Norfork and Suffollk.

pamment tiles before cleaning pamment tiles before cleaning

Cleaning Pamment Tiles

I started the job using a solution of Tile Doctor Pro-Clean, which is a heavy duty cleaner ideal for stone, tile and grout. The cleaner was diluted with water and left to soak into the Pamment tile and grout for about 10 minutes before being scrubbed in with a black pad fitted to a rotary machine. The soiled solution was then removed with a wet vacuum and washed down with clean water to neutralise the floor of any chemical; we repeated this process a couple of times and we also used a stiff hand brushes to clean up the grout lines. Once happy the floor was given a final rinse and left to dry overnight, A dehumidifier was left running to ensure that the floor would be dry enough to seal the next day.

Sealing Pamment Tiles

The next day came back to do the sealing and after checking the floor had dried sufficiently proceeded to seal it . Tile Doctor Seal and Go was used to seal the floor, it’s a water based sealer so it doesn’t give off an odour when it’s drying and also offers durable stain protection together with a low sheen finish which enhances the look of the tile. Like Terracotta Pamment tiles are very porous and took seven coats of sealer r before it was fully sealed.

pamment tiles after cleaning pamment tiles after cleaning

The work took two days in all and now the floor is much easier to maintain.
 
 
Source: Pamment Tiles Cleaned in Suffolk

Cleaning Cement Encaustic Tiles

This unusual Emery and Cie Cement Encaustic tiled floor in Ealing W5 had been poorly installed by the tiler with grout haze on the tiles and the wrong sealer used. Cement encaustic tiles are quite delicate and difficult to restore.

Cleaning Semi-Riven Slate Tiles

I used a red burnishing pad fitted to a buffing machine to cut into the tile surface and remove the grout haze and old sealer. The next step was to apply a dilution of Tile Doctor Pro-Clean letting it soak into the tile before working it in to the tile with a red buffing pad. The soiled cleaning solution was then removed using a wet and dry Vacuum and the floor washed down with clean water. This cleaned up the floor well but there were some stubborn stains which were removed using a steamer.

Cement Encaustics Before Emery and Cie Tiles After

Sealing Semi-Riven Slate Tiles

Once the floor had dried it was sealed using three coats of Tile Doctor Colour Grow which is a colour intensifying sealer that provides durable surface protection. Last step was to burnish the tiles again with a green burnishing pad to bring up the shine.

Although the floor had been too damaged to be made perfect, it was very much better when I had finished and the customer was delighted with the result.
 
 
Source: Cement Encaustic Tile cleaning in Ealing

Coffee Stains removed from Marble Tile

These Marble Tiles were laid in an en-suite bathroom at a house in Bridport, the main problems to be addressed WERE that the floor had dulled and lost most of its shine, there was also a coffee stain in the corner which needed to be addressed.

Marble EnSuite Floor Before

Removing Stains from Marble Tile

To remove the ingrained coffee stain we used Tile Doctor Reduxa, which is a penetrating stain remover used in conjunction with a heat gun, it can take a little time to work but its very easy to apply, I’ve copied the instructional video below so you can see for yourself.

Polishing Marble Floor Tiles

Before polishing the marble tiled floor we set about giving it a quick clean using a mild dilution of Tile Doctor Pro-Clean to ensure there was no grit on the floor that could lead to deep scratches when polishing. The floor was then rinsed with clean water to remove and chemical residue and we then began polishing the floor using a set of burnishing pads fitted to a heavy buffing machine. There are four pads in the set each encrusted with very fine diamonds, you start the process with the Red pad which is designed to remove sealers, followed by the White polishing pad for the removal of ingrained dirt then the Yellow smoothing pad and finally the Green polishing pad.

Sealing Marble Tiles

The floor was then washed down to remove any remnants from the polishing process and dried off so it could be sealed. To seal the floor we used a single coat of Tile Doctor Ultra Seal which is a premium penetrating sealer that gives a natural appearance and will provide long lasting stain protection going forward.

The customer requested the coffee stain removed and a high shine finish and was not disappointed, my photography skills aren’t brilliant but hopefully you can also see the improvement.

Marble EnSuite Floor After

 
 
Source Coffee Stains removed from Marble Tile in Dorset