Restoring the Appearance of Travertine Kitchen Tiles in Cirencester


This customer from Cirencester was not happy with her look of her Travertine floor tiles; in fact, she had been browsing the Tile Doctor web site and realised how her floor should look and got in touch to have it renovated.

Polished Travertine Cirencester Before Cleaning Polished Travertine Cirencester Before Cleaning

I’m based in Dursley which is West Gloucestershire and have made the journey to Cirencester to the East on several occasions to work on tiled floors there. If you have never been it’s worth a visit; it’s a lovely market town which dates back to Roman times and is situated on the lower slopes of the Cotswold Hills.

Burnishing a Travertine Tiled Floor

To get the best from Travertine it really needs to be burnished which is an abrasive cleaning process that involves the application of several different grades of diamond encrusted pad to the stone lubricated with a small amount of water.

The pads are fitted to a rotary buffer and run over each tile in sequence from coarse to very fine. I started with the first of the four burnishing pads which is a coarse 400 grit pad that designed to grind away the dirt and old sealer on the surface of the floor. After applying the first pad, I moved my way through the medium 800 and fine 1500 grit pads to gradually restore the appearance of the Travertine making sure to rinse the floor with water in between to remove the soiling.

Next, I set about cleaning grout lines with Tile Doctor Remove and Go which was diluted with water and then scrubbed in with a stiff narrow brush. The soiled cleaning solution was then rinsed off with more water and extracted using a wet vacuum.

Polished Travertine Cirencester During Polishing Polished Travertine Cirencester During Polishing

The burnishing and grout cleaning took most of the day and I need the floor to be dry in order to seal it so I left for the day and left the floor to dry off fully overnight.

Sealing a Travertine Tiled Floor

The next day and before sealing the floor I applied the last pad in the set of four which is a 3,000 grit “very fine” burnishing pad. This final pad really builds the final polish on Travertine tile. The pad is applied with the rotary buffer as before but is applied dry with only a fine spray of water using a process we call a “Spray Burnish”

Once I was happy with polish I proceeded to seal the floor using Tile Doctor Ultra Seal which is a natural look sealer the seeps into the pores of the stone protecting it from within but without affecting the look of the stone. The floor was then left to dry for an hour and I finished by giving the Travertine a final buff using a white pad.

Polished Travertine Cirencester After Polishing Polished Travertine Cirencester After Polishing

My customer was delighted and now she has a Travertine tiled floor looking how it should.
 
 

Professional Travertine Floor Polishing and Sealing in Gloucestershire



Source link

Marble tiled vestibule cleaned and polished in Edinburgh


I was asked to take a look at this small but beautiful Marble tiled vestibule at the entrance to a lovely house in Edinburgh. As you can see from the photograph below the colours in the Marble were looking washed out and the overall appearance was dull and lifeless. As the main entrance it must have seen a lot of foot traffic and a fair amount of wear and abuse over the years.

Polished Marble Vestibule Before Cleaning Edinburgh

Cleaning and Polishing Marble Tiles

The first task was to brush and vacuum the floor to remove debris and grit. After this the floor was sprayed with a dilution of Tile Doctor Pro-Clean a tile cleaner that is safe to use on stone floors and scrubbed in with a black buffing pad fitted to a rotary machine. This released a lot of dirt from the tile and the soiled cleaning solution was then rinsed off with water and extracted using a wet vacuum.

Once the floor had all the surface dirt removed we then proceeded to polish the marble with a set of diamond burnishing pads which restore the shine the stone. The burnishing pads come in a set of four and you start with a coarse pad with a little water and work your way through the set moving from a the coarse pads through to the finer pads; this process polishes the stone more and more until you get a smooth finish. After each pad was used the area was thoroughly rinsed with clean water to remove any slurry kicked up by the process before moving onto the next. Once we had gone through all four pads the floor was left clean, smooth and shiny.

Sealing Marble Tiles

Being a high traffic area I wanted to leave a very durable polish that would last for years to come, so once the burnishing process was completed we proceeded to seal and further polish the Marble by buffing the floor with Tile Doctor Shine Powder. The crystallising powder provides a very high shine and a tough durable finish, ideal for this situation.

Polished Marble Vestibule After Cleaning Edinburgh

I think you will agree we have managed to put the life back into the floor which is especially important in hallway’s and entrances like this as they are the first thing you see when you come into the property.
 
 

Marble Tiled Entrance Restored in Edinburgh



Source link

Restoring the Appearance of a Polished Limestone Tiled Floor in Cirencester


This customer was looking to rent out his property in the East Gloucestershire town of Cirencester, the largest in the Cotswold District. However, he found that many prospective tenants were put off by the condition of the Limestone floor tiles on the ground floor.

Limestone Bathroom Floor Before Cleaning Cirencester

Over the years, the sealer had worn away and that had allowed for dirt and stains to become ingrained in the pores of the stone, leaving the Limestone tiles looking very dull, unclean and generally undesirable. To boost his chance of finding a tenant for the property, the customer asked me to come in to restore the Limestone tiles to their best possible condition.

Limestone Kitchen Floor Before Cleaning Cirencester

I arrived at the property and conducted a survey to assess the situation. The customer – not wanting to waste any more time – asked if I could complete the restoration straight away, fortunately I was able to shuffle a few things around and was able to make a start two days later.

Limestone Floor Before Cleaning Cirencester

Burnishing a Dull and Dirty Limestone Tiled Floor

With Limestone, as well as other high-end stone like Marble and Travertine, we find that the best method for restoration is burnishing. This is a form of polishing which involves the sequential application of diamond encrusted pads of different grit levels.

We work with a system of four pads fitted to a buffing machine. The first is a Coarse pad, which grinds away the top layer of dirt and staining from the stone, along with any old sealer. I then moved through the system, applying each in turn the Medium, Fine, and Very Fine burnishing pads to gradually refine the polish on the floor. A small amount of water was used as lubricant between each pad, and I hoovered up any resulting slurry with a wet-vac machine.

Having finished polishing the stone, I paid attention to cleaning the grout lines, applying Tile Doctor Remove and Go, which draws out any ingrained stains and heavy grease build-up, and scrubbing it in with a specialised grout brush. The floor was then left to dry out completely overnight.

Sealing a Limestone Tiled Floor

Upon returning to the property the next day, I checked the floor was completely dry and quickly vacuumed up any leftover debris from the previous day’s work. Next, I gave the floor another polish with the Very Fine 3000 grit diamond burnishing pad, vacuumed it again, and it was then ready to be sealed.

Limestone Floor Sealing Cirencester

To do this I used Tile Doctor Colour Grow, which is an impregnating sealer that not only acts to protect the stone, but also intensify its natural colours. The floor was then left to dry for an hour, before I subsequently gave it one final dry polish using the Very Fine burnishing pa fitted to the buffing machine. After vacuuming up any debris, I applied a second coat of Colour Grow, left it to dry, and finally buffed it with a soft white pad.

Limestone Kitchen Floor After Polishing Cirencester

The customer was really pleased with the results, having never expected for the restoration to turn out so well. Undoubtedly there will a queue of prospective tenants hoping to see the property now that the Limestone tiled floor looks so great!

Limestone Bathroom Floor After Polishing Cirencester
 
 

Professional Tile Burnishing, Cleaning and Sealing for a Dirty and Stained Limestone Tiled Floor Restoration in Cirencester



Source link