Dirty and Stained Marble Kitchen Tiles Rejuvenated in St Neots


St Neots is the largest town in Cambridgeshire, with a population of approximately 40,000 (Cambridge is after all a city). This is unsurprising, since the town has a long and rich history. In fact, archaeological evidence indicates that the area was home to settlements as early as the prehistoric Mesolithic period.

I was recently called out to a property in the area – which itself was relatively old – to see what could be done to restore the condition and appearance of a Marble tiled kitchen floor, stylised in a small and uniform square pattern. It appeared to me that the tiles had been installed for a long time – perhaps even laid down in the original construction of the property – and, in any case, had suffered many years’ worth of neglect.

The result? A very dirty and unappealing appearance and a very unhappy owner.

Marble Tiled Kitchen Floor Before Cleaning St Neots Marble Tiled Kitchen Floor Before Cleaning St Neots

Cleaning a Dirty Marble Tiled Kitchen Floor

Before beginning the restoration of the floor, I covered up the walls and kitchen units to protect from exposure to any of the cleaning products I would be using. I then started by cleaning the floor with Tile Doctor Remove and Go, which is a multi-purpose product. Remove and Go both cleans the stone and strips away any old sealer.

However, there were several areas of the floor which were affected by more deeply ingrained dirt and stains. To remove these, I needed to use a process which we call burnishing. This involves the application of diamond encrusted burnishing pads to grind away the damage layer of stone. I then used a truck-mounted pressure washing system to rinse the floor and remove all the excess slurry and chemicals.

Sealing a Marble Tiled Kitchen Floor

While burnishing can be used to achieve a high quality polished finish on stone such as Marble, Limestone and Travertine, the customer decided instead to have a more natural look for the floor.

Therefore, to seal the freshly cleaned Marble tiles, I applied two coats of Tile Doctor Colour Grow, which is an impregnating sealer that offers maximum protection and a matte finish that matches nicely with the rustic characteristics of the floor. As an impregnating sealer, Colour Grow penetrate deep into the pores of the stone to fill them and prevent dirt from becoming ingrained in the future.

Marble Tiled Kitchen Floor After Cleaning St Neots Marble Tiled Kitchen Floor After Cleaning St Neots

The customer was amazed by the difference made to the condition and appearance of the floor, so much so that he has queried about getting more areas of the property cleaned in the future. Another satisfied customer.
 
 

Professional Tile Cleaning and Sealing for a Dirty and Stained Marble Kitchen Tiled Floor Restoration in St Neots



Source link

Acid-Damaged Marble Shower Cubicle Restored in Leatherhead


Marble tiles are a fantastic choice of stone for a shower cubicle because of its distinctive characteristics and quality. It can really add a luxurious feel and when used in a bathroom take it to the next level.

However, it’s extremely important to note that Marble like all natural stone is a porous and acid-sensitive material. It must therefore be cleaned with care using suitable products. This particular Marble tiled shower cubicle at a property in Leatherhead is a good example of this done wrong. The owner had used an acid-based cleaning product to clean the stone, resulting in damage to the sealer and causing unappealing streaks to form.

Marble Shower Wall Leatherhead Before Cleaning

This type of damage can appear irreparable but, with the right combination of cleaning methods and products, it can be fixed. Once the old sealer has been removed, and the tiles have been cleaned, polished and re-sealed, they can look as a good as new. Here’s how I helped this customer restore the Marble shower cubicle.

Cleaning and Polishing a Marble Shower Cubicle

To begin the restoration, I scrubbed the dirty grout lines using Tile Doctor Pro-Clean, which is a highly reliable and multi-purpose alkaline-based product. I then rinsed the tiles with water to remove the traces of cleaning product.

Next, I moved on to the polishing stage of the restoration – what we often refer to as burnishing. This involved the use of small six-inch diamond-encrusted burnishing pads applied with a hand buffer and with different levels of grit – ranging from Coarse to Very Fine. I started with the Coarse grit pad and worked my way sequentially through our four-pad system, polishing the stone with Medium, Fine and eventually the Very Fine pad to really bring up the polish.

Sealing a Marble Shower Cubicle

Once the shine had returned to the Marble and the damage had been removed, I re-sealed the tiles using two coats of Tile Doctor Colour Grow, a penetrating sealer designed to enhance the natural colours and patina of the stone. Once dry, I gave the tiles a final polish with a white buffing pad to put the finishing touches on the restoration.

Marble Shower Wall Leatherhead After Cleaning

The customer was thrilled with the results, saying:
“I’m really happy with the result and we will make sure we don’t use supermarket cleaners again on natural stone. Rupert was a very personable tradesman who took pride in what he was doing. He has identified Tile Doctor Neutral Tile Cleaner as being the product we should have used in the first place and has sent me the website details.”
Another satisfied customer!
 
 

Professional Restoration of a Damaged Marble Tiled Shower Cubicle in Surrey



Source link