Our client in Rotherham had decided to install a new floor in their hallway and after removing many layers of old floor coverings discovered a layer of self-levelling compound underneath. After deciding to chip some of this away they discovered what appeared to be an original Victorian tiled floor. Realising that original features like these are very desirable they decided to call in Tile Doctor to see if it could be restored.
Being the local agent for Tile Doctor I was asked to look at the floor and quote for doing the work. I could see this was going to take some time to do properly, the floor was quite seriously damaged, a big area of tiles were missing, the tiles around each doorway were heavily damaged and there were quite a few loose and cracked tiles around the edges of the floor. But we were confident this floor could be made to look amazing once again and add the original charm of this hallway back to how it was intended to be.
Repairing a Victorian Tiled Hallway Floor
The first course of action was to make the tile repairs which included digging out and rebuilding the sub floor in some areas.
Fortunately, these black and white Victorian Tiles are fairly common, so I was able to source replacements quite easily. There was a lot of areas to cover so this step took a couple of days to complete.
Deep Cleaning a Victorian tiled floor
To get the floor clean we used a slow speed floor polisher fitted with a 200-grit diamond pad. Aided with Tile Doctor Remove and Go it proved to be an effective combination that cut through and removed the self-levelling compound, it also worked a treat at removing paint stains too.
The next step was to give the floor an acid wash to remove any remaining grime and dirt. To do this we applied Tile Doctor Acid Gel which being in gel form is quite easy to control. After being scrubbed into the floor it was extracted using a wet vacuum and then the floor given a thorough rinse with water to remove any traces of product.
The wet vacuum was employed again to extract as much moisture from the floor as possible and then left to dry off fully overnight.
Sealing an Old Victorian Hallway Tiles
The next day I returned to seal the floors checking first that the tiles were dry. All was well so I began applying the sealer which in this case was Tile Doctor Colour Grow which is an impregnating sealer that works by soaking into the pores of the tile to prevent dirt from becoming ingrained there.
The floor was completely transformed over the course of five days and our customer was over the moon with the results calling it her ‘forever floor’.