Floor Damaged Quarry Tiled Floor Restoration Bearwood

My client contacted me regarding their quarry tiled floor which hadn’t been in a good condition for some time. A recent flood in the house, caused by a ruptured pipe in an upstairs boiler had only added to the problem. As you can see from the before pictures, the floor was in a sorry state. On the plus side the flood had led to an insurance claim which would cover the cost of the restoration.

I visited the property and did a test clean on a section of Quarry tiles which came up well. The client was happy the result and agreed to go ahead, my quote was agreed, and the job booked in. The property was in Bearwood which is in the southern part of the Birmingham suburb of Smethwick.

Flood Damaged Quarry Tiled Floor Before Cleaning Bearwood

Cleaning and Repairing a Quarry Tiled Kitchen Floor

The client also needed some Quarry tiles replacing due to them being broken and damaged. So before returning my first task was to source some replacement quarry tiles that would be a good match for the existing. Fortunately Quarry tiles are still popular and I was able to find a set of reclaimed tiles that would make good replacements.

I was able to get the replacements delivered in time for the job starting which was just as well as my first task would be to repair the floor. Fitting the replacements was tricky work as some of the tiles were up to two inches thick and came in various sizes and so had to be cut to size with a wet tile cutter. The tiles were a good match though and they were set in place. Later that day I was able to grout them in using a matching grout along with some other areas that needed re-grouting. By the end of the first day the floor was already looking much improved.

Flood Damaged Quarry Tiled Floor During Repair Bearwood Flood Damaged Quarry Tiled Floor During Repair Bearwood

The next day the floor was cleaned with a strong solution of Tile Doctor Pro-Clean. The solution is left on the tiles to dwell for about ten minutes so it can start to soak into the deep-seated dirt and break it down. The tiles were then scrubbed with a black pad fitted to a weighted rotary machine. The grout was also cleaned at this point using more Pro-Clean and a hand-help scrubbing brush.

There was also a fireplace hearth that needed cleaned, this also had to be cleaned by hand as the machine was too large. The floor was then rinsed with water and the resultant slurry extracted with a wet vacuum.

Flood Damaged Quarry Tiled Floor Before Cleaning Bearwood

The last part of the cleaning process was to give the tiles and acid-wash using a dilution of Tile Doctor Grout Clean-Up. This is an acidic product that can remove mineral staining and will also counter any alkaline salt deposits in the pores of the tile that could surface as the floor dries later. The floor was rinsed again and allowed to dry out for two days before I returned.

Sealing a Quarry Tiled Hallway Floor

On the final day I first confirmed the Quarry tiles had dried out were ready for sealing. I then sealed the tiles using Tile Doctor Colour Grow which is a fully breathable sealer that would protect whilst allowing moisture in the floor to rise through the tile. This sealer will also enhance the strong natural colour of the quarry tiles. The tiles were quite porous so four coats of sealer were needed, then after drying the floor was buffed with a white pad.

Flood Damaged Quarry Tiled Floor After Restoration Bearwood

The work transformed the floor and my customer was over the moon with the end result.

Flood Damaged Quarry Tiled Floor After Restoration Bearwood

For after-care I left the customer with a complimentary bottle of Tile Doctor Neutral Tile Cleaner. This is a pH neutral product that is safe to use on sealed surfaces and won’t prematurely erode the sealer.

 

Professional Restoration of a Quarry Tiled Floor in Birmingham

Source link

Flood Damaged Terracotta Tiled Kitchen Floor Rescued in Docking


Luckily for this client in the village of Docking in Norfolk, the water pipe under her kitchen sink burst the day before she left for a four-week holiday in the USA, so at least she was able to turn the water off at the mains and minimise the damage before leaving for the airport… every cloud, as they say!

On her return she found that the Terracotta tiled flooring had dried out perfectly but unfortunately, the acrylic sealer had suffered badly as the evaporating moisture came up through it and the entire surface of the floor had developed a milky-white bloom. Our client thought that complete replacement of the whole floor, which ran from a large kitchen diner through to a long utility room with separate storage cupboards and a WC would be the only option. Fortunately, before investigating that expensive option she gave Tile Doctor a call in the hope that the floor could be saved.

Large Terracotta Tiled Floor Before Cleaning Docking

Deep Cleaning Water Damaged Terracotta Floor Tiles

In order to remove the damaged acrylic sealer, we applied a strong dilution (1:2) of Tile Doctor Pro-Clean mixed with a little Tile Doctor Remove and Go. This was scrubbed in along with a small amount of honing powder using our 17″ rotary machine fitted with a medium nylon brush before being power rinsed and extracted to remove all the chemicals and resulting slurry.

The grout lines, corners and edges where the original sealer had been applied more thickly were then further cleaned by hand with Tile Doctor Nanotech HBU Remover, HBU stands for Heavy Build-Up and this is a useful product for tackling stubborn areas.

The floor was then finished off with very fine honing powder applied with water and a black scrubbing pad before being rinsed and extracted again. Finally, the whole floor was acid washed with Tile Doctor Acid Gel to neutralise all remaining cleaning agents and counter act any efflorescence salts which may appear in the future before being left to dry thoroughly overnight with the assistance of our dehumidifier.

Sealing Terracotta Floor Tiles in Docking

On our return the following day, the floor was thoroughly damp tested and found to have dried extremely well enabling us to start applying the new sealer straight away. The client had specified a muted shine surface for her floor, so we chose to use Tile Doctor Seal and Go.

Terracotta is made from clay which is quite a porous material so seven coats were needed to completely seal the floor. This would provide optimum fluid resistance along with the mid-sheen finish she had requested.

Here’s what the client had to say when we’d finished:

I am delighted with the work carried out. The terracotta tile floor of my kitchen was in a terrible state following a flood and it has been restored to an excellent condition. A very professional and personal service which I am happy to recommend.

Large Terracotta Tiled Floor After Cleaning Docking

 

Renovating Terracotta Floor Tiles in Norfolk



Source link