Deep Cleaning a Sandstone Flagstone Floor in Burscough


This customer had just moved into a lovely property in the small Lancashire town of Burscough and wanted to have the Sandstone Kitchen floor professionally renovated as it was not looking its best.

I arranged an appointment to visit the property after discussing the floor over the phone, some customers like to get a quote over the phone and although I’m happy to give someone a ball park figure I really need to see the floor in order to give them an accurate price as you simply don’t know what your going to find.

Upon inspecting the floor inspect the floor I could see the previous owner had sealed the floor with multiple layers of Varnish which is not a suitable agent for protecting Sandstone floors. The stone was the riven variety and was trapping dirt across its veins and was now proving difficult to clean, the grout had also gone black with dirt. Undeterred I did a test clean on part of the floor and the results proved promising, so we agreed a price and date to return and complete the job.

Sandstone Floor Before Renovation Burscough

Deep Cleaning a Sandstone Kitchen Floor

To deep clean the floor the sandstone flagstones were covered in a strong 1:3 dilution of Tile Doctor NanoTech HBU Remover which stands for Heavy Build-Up Remover. It was left to dwell and soak into the stone for ten minutes before being scrubbed clean using a rotary buffing machine fitted with a black scrubbing pad. The now dirty cleaning solution was then removed using a wet vacuum and then the whole floor rinsed with water.

Sandstone Floor During Renovation Burscough

I had to repeat the process on stubborn stains assisted with a steam cleaner to lift the dirt out of the pores of the stone. Once I was happy with the floor I gave it a final rinse to with water to neutralise the floor and remove any trace of cleaning products. It was then dried as much as possible with a wet vacuum and then left to dry off fully overnight.

Sealing a Sandstone Kitchen Floor

I returned the next day to seal the floor first checking it for dampness using a damp meter, the flagstones were dry, so I was able to proceed as planned. To seal the stone, I used multiple coats of Tile Doctor Seal & Go Extra which is a breathable acrylic sealer that can be used on internal and external Sandstone flagstone floors and does a nice job of lifting the appearance of the stone.

Sandstone Floor After Renovation Burscough

You can see from the final photograph that the Sandstone flagstones and grout now looks so much better. My Customer was amazed with the transformation and the floor now looks brand new, they even left the following comment on the Tile Doctor feedback system.

Extremely happy with the end result. Kamila was knowledgeable & professional. We cant recommend her enough. Paul B., Burscough

 

Deep Cleaning a Sandstone Kitchen Floor in Lancashire



Source link

Deep Cleaning Flagstone Flooring in Vines Cross


This customer who lived in the old Sussex village of Vines Cross near Horam, had a lovely Flagstone floor installed in the Kitchen some years earlier but because they wanted a completely natural look no sealer had been applied. With no protection in place dirt had become ingrained into the pores of the stone over time making it dull and difficult to clean effectively.

Flagstone floor before restoration Vines Cross

Their beautiful flagstone floor no longer looked as it should and the owner of the house was keen to have it deep cleaned and looking its best again. I was happy to do the work and before starting I made sure to discuss the topic of sealing and recommended one called Tile Doctor Ultra-Seal which is a natural look sealer that doesn’t change the look of the stone yet protects it from dirt becoming ingrained.

Flagstone floor before restoration Vines Cross

Deep Cleaning a Lapicida Sandstone Floor

With no sealer evident on the stone there was no need to use a coatings remover on the tiles, so after protecting the Kitchen units and skirting board with plastic tape I started with a combination of Tile Doctor Pro-Clean tile and grout cleaner mixed with a small amount of another Tile Doctor product called NanoTech HBU. HBU stands for Heavy Build-Up and this product utilises nano-sized abrasive particles to assist in the cleaning process.

The solution was left to dwell and soak into the stone for ten minutes before being scrubbed in using a rotary buffing machine fitted with a black pad. With the cleaning solution on the floor I also took the time to run a stiff brush along the grout lines to make sure they were also scrubbed clean. After a while the cleaning solution became dirty with all the soil that was being released from the tile and was then extracted using a wet vacuum. The floor was then rinsed with water and stubborn areas re-treated using the same process until I was satisfied it was thoroughly clean.

Flagstone floor during restoration Vines Cross

After giving the floor a final rinse and drying it as much as possible with a wet vacuum it was left to dry off fully overnight.

Flagstone floor during restoration Vines Cross

Sealing a Flagstone Floor

I returned the next day to seal the floor first checking it for dampness using a damp meter. All was well, and the flagstones were dry, so I was able to proceed with sealing the stone.

As I mentioned earlier my client liked the natural look but having experienced the problems of maintaining an un-sealed floor had agreed for me to seal it with Tile Doctor Ultra-Seal. I applied a single base coat of Tile Doctor Ultra Seal as agreed and then recommended that we add a coat of Tile Doctor Seal and Go as well, just to brighten up the floor and add a slight sheen.

Flagstone floor after restoration Vines Cross

I knew from experience this would work well on Flagstones and my client was happy to trust me. As suspected the combination of the two sealers was a winner and my client was overjoyed with the resulting effect and more so that she can now maintain it satisfactorily.

Flagstone floor after restoration Vines Cross
 
 

Deep Cleaning a Flagstone Kitchen Floor in East Sussex



Source link

Deep Cleaning Lapicida Sandstone Flagstones in Bedale


This customer who lived in the old North Yorkshire market town of Bedale, had a Lapicida Sandstone floor installed many years prior and over the years the sealer had worn off and dirt had become ingrained into the pores of the stone making it dull and difficult to clean effectively. Based in Harrogate, where they have Europe’s largest stone gallery, Lapicida are a premier Tile and Stone company that specialise in reclaimed Sandstone with prices that range from £79 to £594 per square metre.

Dirty Lapicida Sandstone Floor Before Cleaning Bedale

Naturally having such an expensive stone floor installed my customer wanted it to look its best however when your living with a stone floor day in, day out you fail to notice the gradual decline in its overall appearance. Then one day you suddenly realise the floor is overdue a deep clean and reseal and call in Tile Doctor; there is an alternative however, simply speak to Tile Doctor about setting up an annual Maintenance Plan whereby we pop by once a year to clean the floor and top up the sealer.

Dirty Lapicida Sandstone Floor Before Cleaning Bedale

Deep Cleaning a Lapicida Sandstone Floor

To deep clean the floor the sandstone flagstones were covered in a strong 1:3 dilution of Tile Doctor Pro-Clean which was left to dwell and soak into the stone for ten minutes before being scrubbed clean using a rotary buffing machine fitted with a black pad. The now dirty cleaning solution was then removed using a wet vacuum and then the whole floor washed down with water and stubborn areas re-treated until I was satisfied. Unusually for Sandstone it was all graded and uniformly flat which made cleaning a lot easier.

With the floor clean and all the dirt removed it revealed some black marks, most of which were from candle wax which is very difficult to get off. To tackle this problem a heat gun was used to melt the wax and then it was dappled with a clean cloth. This process was mostly successful, but some still left a faint Mark which the customer was ok with.

After giving the floor a final rinse and drying it as much as possible with a wet vacuum it was left to dry off fully overnight.

Sealing a Lapicida Sandstone Floor

I returned the next day to seal the floor first checking it for dampness using a damp meter. The flagstones were dry. I was going to seal the Stone with Tile Doctor Colour Grow which would have enhanced the natural colours in the stone, but the customer liked the light appearance of the cleaned stone, so l used Tile Doctor Ultra Seal instead; Ultra-seal is a natural look sealer, so it doesn’t darken the stone. Both sealers are what we call impregnators which work by soaking into the pores of stone protecting it from within by preventing dirt from becoming ingrained.

Dirty Lapicida Sandstone Floor After Cleaning Bedale

I’m sure you will agree the floor looks much improved, certainly the customer and myself were both very pleased with the transformation of the floor; my customer even left the following testimonial on the Tile Doctor feedback system.

Nigel Stoker was knowledgeable, efficient and very pleasant. My floors are looking amazing. Claire G, Bedale

Dirty Lapicida Sandstone Floor After Cleaning Bedale
 
 

Deep Cleaning a Lapicida Sandstone Flagstone Floor in North Yorkshire



Source link