Quarry Tiled Hallway Floor Renovated in Didcot


This quarry tiled hallway at a house in Didcot had not been renovated for many years and any sealer that was once present on the tiles had long since worn off leaving it vulnerable to dirt which then became ingrained in the tile.

Quarry tiled Hallway floor before renovation in Didcot

I went over to the property in Didcot to survey the floor and could see that although the floor was in good physical condition it was now long overdue a deep clean. The floor had a lovely black and white border around the terracotta coloured tiles and I was confident that this floor would look really good once fully cleaned and resealed.

Deep Cleaning a Quarry Tiled Hallway Floor

The first process was to scrub the floor with Tile Doctor Pro-Clean using a rotary machine fitted with a silicon carbide brush. This is a multi-purpose cleaner which is high-alkaline, it acts as a stripper and degreaser too so is perfect for this situation. The highly concentrated solution is left to dwell on the floor for a short time which helps it to work on the stubborn dirt. Once the floor had been scrubbed the residue was rinsed off with clean water. Finally removing the slurry produced with a wet vacuum.

To counter the strong alkaline products used on the floor and further clean the tile the floor was given an Acid Wash using Tile Doctor Grout Clean-Up. It was scrubbed into the tile and grout using a soft brush and then rinsed off with water. I then scrubbed the floor with Tile Doctor Neutral Tile Cleaner to neutralise and remove the acidic cleaner again using a wet vac to remove all the liquids from the floor. Once, I was satisfied that the floor was as clean as possible I left the floor to dry overnight.

Quarry tiled Hallway floor during renovation in Didcot

Sealing a Quarry Tiled Hallway Floor

On day two I returned to seal the floor. The first job of the day was to test it with a damp meter first to make sure it was dry. We don’t recommend applying a sealer if the floor isn’t dry as we know from experience that the results can be patchy. Happy that we were good to go ahead I sealed the floor with several coats of Tile Doctor Seal & Go. This is a specially formulated water-based blend of acrylic polymers that provides both a stain resistant seal and a gives the floor a durable attractive low-sheen finish.

The customer was very happy with the results and left the following feedback:

“Barry was brilliant! Has made a lovely job of our hall. We had one small problem (our fault) which he rectified promptly. Would happily recommend him.”

Before leaving I discussed with the client the best way to maintain the floor going forward. Many homeowners don’t realise this but many of the tile cleaning products sold in supermarkets are designed for cleaning Ceramic or Vinyl tiles and are not recommended for use on a sealed surface as they will prematurely erode the sealer away over time. We recommended using the Tile Doctor concentrated Neutral Tile and Stone cleaner. It has been especially formulated for the regular cleaning of sealed tile and stone surfaces.

Quarry tiled Hallway floor after renovation in Didcot

 

Professional Cleaning of a Quarry Tiled Hallway in Oxfordshire



Source link

Mould-Covered Porcelain Shower Tiles Refreshed in Didcot


Available in a variety of styles and designs Porcelain tiles are harder than normal Ceramic tiles and are known for their durability and water resistance, making them ideal for use in shower cubicles and bathrooms.

However, as I’m sure most people already know, shower tiles are not the easiest to keep clean and fresh. These tiles are exposed daily to a multitude of acidic soaps and shampoo dyes, and if proper precaution is not taken to rinse away the excess after using the shower, mould will grow very quickly on the grout.

This shower cubicle, constructed from Porcelain tiles, is a typical example of this. As you can see from the photo below, the mould problem was very apparent. I was asked by the property owner, who lives in Didcot, a railway town in South Oxfordshire, to refresh it after what must have been years of neglect. Here’s how I did it.

Porcelain Shower Before Renovation in Didcot

Cleaning a Porcelain Tiled Shower Cubicle

The first process in restoring this shower cubicle was to spray the walls with Tile Doctor Duo Clean, which is both a grout cleaner and a mould remover. I left it to dwell for 45 minutes, before proceeding to scrubbing into the grout with a stiff brush. I worked in sections, spraying more Duo Clean onto the tiles as I moved along the length of the walls.

Following this, I rinsed the entire cubicle with fresh water to remove any traces of chemicals and used my wet-vac machine to dry it quickly. The next process was to remove the old, mouldy silicone and replace it with fresh silicone.

Sealing a Porcelain Tiled Shower Cubicle

With the shower cubicle now fresh and clean, it was now time for me to seal the grout and tiles.

I did this using Tile Doctor Wall Grout Sealer Spray, which is a water-based grout sealer that prevents oil, water and acid-based contaminants – including soaps and shampoos – from spoiling the appearance and colour of grout. It does this while allowing for moisture vapour transmission.

Check out the photo below – you can see that after a short day’s work, the appearance of the cubicle has been completely transformed. The customer was very pleased with the result and the addition of the sealer will ensure it stays this way for some time to come.

Porcelain Shower After Renovation in Didcot
 
 

Professional Porcelain Tiled Shower Cubicle Renovation in Didcot



Source link