Textured Ceramic Flooring Deep Cleaned in Stirling Shop


The anti-slip nature of Textured Ceramic tiles make them a popular choice for public areas such as in this case a shop floor in my local city of Stirling. They do have a major drawback though, in that the rough textured surface which gives the tile its anti-slip property traps dirt over time making them look very unattractive and very difficult to clean effectively.

Textured Ceramic Tiled Shop Floor Before Deep Cleaning Stirling

The photograph below shows just how dirty my customers shop floor looked when I arrived to survey the floor. Despite cleaning the floor with all manner of supermarket products the tiles looked incredibly dirty and did not provide the clean inviting appearance they wanted to portray. The shop was due to open for the first time shortly and desperate to resolve the situation we were asked to come over and give the ceramic tile and grout a really deep clean.

If you’re not familiar with Stirling, then you should know its steeped in history and was once the capital of Scotland. It was also the location of several battles during the Scottish war of independence from England involving William Wallace and Robert the Bruce.

Deep Cleaning Textured Ceramic Shop Flooring

Normally on commercial projects we get involved in we have to work outside of normal opening times as its not practical to deep clean a floor with people coming and going fortunately however this was not a problem in this case.

After clearing the floor space, we set to work soaking the tile and grout in a medium dilution of Tile Doctor Pro-Clean which is our go to Tile and Grout cleaner. It was left to soak into the tile for about ten minutes before the floor was scrubbed, so it could get to work on breaking down the dirt. To make light work of scrubbing the solution into the floor we used a coarse diamond burnishing pad fitted to a rotary floor buffer. It was interesting to see the cleaning solution turning black with dirt as we moved across the floor.

Once done the soiled cleaning solution was rinsed off the floor with water and then extracted with a wet vacuum. Next step was to give the grout a good scrub using a repeat of the same process however we find a stiff scrubbing brush run over the grout lines works best for this as pads can struggle to reach into the recesses of the grout.

The process worked well and after rinsing and extracting again we did a final inspection spot treating any stubborn areas with a repeat of the same process until we were satisfied the tile and grout were as clean as they could be.

The floor looked really fresh by the time we had finished, and you can image my client was very pleased with the results and relieved that the floor looked clean again.

Textured Ceramic Tiled Shop Floor After Deep Cleaning Stirling

 

Professional Shop Floor Tile and Grout Cleaning in Stirling



Source link

Orginal Quarry Tiled Hallway Restored in Rednal


I was recently contacted by a home owner who had recently bought a property in Rednal which is a residential suburb on the south western edge of Birmingham near Bromsgrove. They were updating the flooring and discovered a quarry tiled floor under their living room carpet. The Quarry tiles were most likely original dating back 113 years and the owner was keen to have such an original feature restored.

Quarry Tiled Floor Before Restoration Rednal

The Quarry tiles were well worn in areas and it looked as though a previous owner had levelled the floor using a cement screed to try and fill in any worn areas. Unfortunately, this had left the tiles with a rough surface and were very dirty as the photos show.

Quarry Tiled Floor Before Restoration Rednal

Cleaning Original Quarry Tiles

My first task was to remove any loose dirt and debris with a wet dry vacuum. Once done I then applied a strong dilution of Tile Doctor Pro-Clean to give the tiles an initial clean to remove dirt from the tiles. The solution was left to soak into the tile for around ten minutes and then worked into the floor using a rotary machine fitted with a black scrubbing pad.

Quarry Tiled Floor During Restoration Rednal

This process highlighted the roughness of the tiles from the cement as the pad was being torn by it. I decided that the best way to remove the cement was to scrape it away aided with a steamer. This meant a few hours on my hands and knees scraping away which was hard work but needs must!

Quarry Tiled Floor During Restoration Rednal

When this was completed I used hand held diamond blocks to remove paint marks and adhesive from where the skirting board had been. I then cleaned the floor again with more Pro-Clean and a new black pad, I also cleaned the grout lines with a stiff grout brush. The floor was then thoroughly rinsed off with water to remove any dirt and solutions and this was then extracted using a wet vacuum.

With the floor now clean I could see there were signs of efflorescence markings on the floor which is where salts are carried up through the floor through evaporation. These old floors don’t have a damp proof membrane in place to prevent damp issues so to neutralise the salts I applied Tile Doctor Acid Gel to the floor. This was left in place for a short time before rinsing the floor again. The floor was then allowed to dry out for a couple of days.

Sealing Original Quarry Tiles

Upon my return I checked the floor for damp with a meter which gave satisfactory readings. The floor was then sealed with two coats of Tile Doctor Colour Grow which is an impregnating colour enhancing sealer that really brought out the red colour of the quarry tiles.

Quarry Tiled Floor After Restoration Rednal

One the sealer had dried the floor was then buffed off with a white pad to remove any excess. As you can see the floor was transformed. I left the customer with a bottle of neutral tile cleaner to help maintain the floor.”

Quarry Tiled Floor After Restoration Rednal
 
 

Restoration of an Original Quarry Tiled Floor in the West Midlands



Source link

Cleaning Wood Effect Porcelain Tiles after Building Works in Lichfield


This article comes from a recently renovated house in the medieval cathedral city of Lichfield which is North of the new M6 Toll road. My customer had recently brought a house there and was refurbishing it from top to bottom, unfortunately however by the time the refurb was finished the new wood effect Porcelain tiled floor in the kitchen and hallway had become very dull & dirty.

Wood Effect Porcelain Lichfield Before Cleaning Wood Effect Porcelain Lichfield Before Cleaning

Acid Washing Wood Effect Porcelain Tile

The tiled were basically dirty with plaster dust and I suspected grout smears to I decided the quickest and most effective method to clean them up would be to give the whole floor an acid wash with Tile Doctor Grout Clean-up.

Tile Doctor Grout Clean–Up is specially designed for removing excess grout as well as dealing with mineral salt problems so working in sections I applied the product to the floor and left to soak for five minutes before scrubbing into the tiles and then rinsing it off with cold water which was then removed with a wet vacuum. Some of the more stubborn areas had to be retreated and with a longer dwell time and more scrubbing but the process had the desired effect.

Once the whole floor was done I gave it a final rinse and used the wet vacuum to remove as much moisture from the floor as possible before leaving it to fully dry off overnight.

Sealing Wood Effect Porcelain Tile

There are a number of different types of Porcelain tile and most do not require a sealer however I had determined that this type was in fact the micro porous variety and would accept a sealer. If you’re having a new tiled floor laid it helps to keep some unused tiles back so you can test different sealers on them before applying the sealer to the actual floor. In this case three coats of Tile Doctor Seal and Go were applied and this worked very well as you can see from the photographs below.

Wood Effect Porcelain Lichfield After Cleaning Wood Effect Porcelain Lichfield After Cleaning

The customer said it looked better than it did when it was first laid so was very happy.
 
 

Builders Clean for Porcelain Tiled Floor in Staffordshire



Source link

100+ Year Old Victorian Tiled Hallway Restored in Dudley


It may sound impossible to restore tiles that are over a century old back to something resembling their original condition but in fact it’s something we do all the time. With the right cleaning products and techniques, fantastic results can be achieved.

An example being this work I did for a customer in Dudley. They had seen previous examples of Tile Doctor’s work and wanted to have their 128-year old Victorian tiled hallway which had been covered in carpet previous restored to its best possible condition. Dudley is a town in the West Midlands that is often touted as one of the birthplaces of the Industrial Revolution so there are lot of period houses.

Victorian Tiled Hallway Floor Before Cleaning Dudley Victorian Tiled Hallway Floor Before Cleaning Dudley

When I first went over to survey the floor I could see that restoring these Victorian tiles would be a significant job involving deep cleaning, tile repair and sealing. Upon closer inspection of the tiles, I realised that there was also a small area that met the hallway which was actually Terrazzo. This was to be cleaned and sealed too however I’ll deal with that in a separate post as the process was different.

Victorian Tiled Hallway Floor Before Cleaning Dudley

Cleaning Original Victorian Tiles

To start the restoration, I treated the floor with Tile Doctor Pro-Clean which is a strong alkaline tile and grout cleaner, leaving it to dwell for a short period to start breaking down the heavy soil build-up.

Victorian Tiled Hallway Floor During Cleaning Dudley Victorian Tiled Hallway Floor During Cleaning Dudley

While the Pro-Clean was soaking into the tile, I carefully scraped off the paint that had been dropped on the tiles during decorating at some point in the past. Next, I fitted a rotary machine with a 200-grit diamond encrusted burnishing pad – which is very coarse – and put it into action to remove deeply ingrained dirt from the tiles.

When this process was complete, the floor was thoroughly rinsed with water and the resulting slurry was soaked up with the aid of a wet vacuum. I repeated this process around the edges of the hallway, where the tiles were particularly badly ingrained with dirt and marked with carpet glue deposits. The floor was given a final rinse with water and the wet vacuum used again to remove as much moisture from the floor as possible before leaving it to dry off overnight.

Before leaving however I had to complete the tiler repairs which involved removing the loose tile and mortar and then setting them back into place. There was also quite a lot of re-grouting that needed to be done on various areas of the floor.

Sealing Original Victorian Tiles

The next day, I returned to the property and ran damp tests in various places to ensure the tiles had dried. Given that these tiles are particularly old, I was conscious that that the floor very likely lacked a damp proof membrane and so damp issues could be a real possibility. We always ensure that floors are completely dry before sealing them as excess moisture can damage the performance of the sealer.

Thankfully, the tiles had dried out and, so I was able to start sealing them with four coats of Tile Doctor Seal & Go which added a nice sheen finish and will protect the floor going forward.

Victorian Tiled Hallway Floor After Cleaning Dudley Victorian Tiled Hallway Floor After Cleaning Dudley

Before leaving I left the customer with a bottle of Neutral pH tile cleaner to help maintain the tiles appearance. The customer was very happy with the results and commented that all the hard work had paid off to leave the floors looking great!

Victorian Tiled Hallway Floor After Cleaning Dudley
 
 

Full Restoration of a Period Victorian Hallway Floor in the West Midlands



Source link

Terracotta Tiled Floor Refurbished in Amersham Council Building


A local cleaning contractor called us in to work on the Terracotta tiled floors at a council building in Amersham. The Terracotta had not been deep cleaned and resealed for about ten years and the sealer had worn off leaving the tile vulnerable to dirt becoming ingrained in the pores of the tile. The grout had also suffered the same fate and had almost gone black in many areas.

Terracotta Floor Files Before Cleaning Amersham Council Offices

This is a common problem with Terracotta which is quite porous and once those pores become ingrained with dirt the tile becomes difficult to clean effectively. The solution is to seal the tile however sealers wear off over time and this was basically the problem.

Terracotta Floor Files Before Cleaning Amersham Council Offices

After discussing the issues we agreed on a plan of action to deep clean the Terracotta tile and grout and then re-seal to protect it. Due to the busy nature of the building we agreed to do the work between Christmas and New Year when we knew the building would be empty.

Cleaning Old Terracotta Floor Tiles

We started by applying a strong dilution of Tile Doctor Oxy-Gel which is a strong tile cleaning product that being in a gel form ensures it sits on the tile for longer, giving it a longer effective dwell time so it can really eat into and loose the dirt. After approximately twenty minutes the gel was scrubbed into the tile with a black scrubbing pad fitted to a rotary machine. This broke down most of the dirt and removed any remaining sealer. Once the whole floor had been treated in this manner it was rinsed thoroughly with water which was then extracted using a wet vacuum.

With the soiled cleaning solution removed I could see the next step would be to spot clean stubborn staining and clean the grout. For this task I used a strong dilution of Tile Doctor Pro-Clean scrubbing it in by hand using stiff brushes and aided with a hand-held steamer to help treat the stubborn staining. Once done the floor was given a final rinse and then as much moisture as possible removed with the wet vacuum.

Sealing Old Terracotta Floor Tiles

We then left the floor to dry off completely and came back a couple of days later to seal the Terracotta tile.

I mentioned earlier that Terracotta is porous; in fact it’s probably the most porous material I deal with, so to fully seal the floor I had to apply eight coats of Tile Doctor Seal and Go which will provide complete and long lasting protection against staining and dirt. Seal and Go also adds an appealing satin sheen to the tile and the new seal will make it much easier to clean in future.

Terracotta Floor Files After Cleaning Amersham Council Offices

The floor tile and grout now look much healthier and I’m sure the council will be very impressed when they go back to work after the holidays.

Terracotta Floor Files After Cleaning Amersham Council Offices

Happy New Year…
 
 

Professional Terracotta Tiled Floor Renovation in Buckinghamshire



Source link