Damaged Victorian Tiled Path Rebuilt in Cardiff


This Victorian tiled path leading up to a lovely period house in Cardiff was in a really bad state of repair with many damaged and cracked tiles. I had already been working on their hallway tiles and the customer was hoping I would be able to salvage the original tiles in the front path. I was confident something could be done but when I started to remove a few I soon found out that would be unlikely. I made a few calls and fortunately I was able to find replacement tiles in a local salvage yard that were a perfect match.

Victorian Tiled Pathway Before Rebuild Cardiff

The border tiles were a different matter though, so I had to buy new tiles that could be mixed with old for the border which I purchased from original style. I’ve used Original Style tiles on a few occasions in the past, they have a section dedicated to Victorian Tiles and stock quite a few of the popular patterns and decorative border designs.

Rebuilding a Victorian Tiled Path

The foundation of the path was cracked and crumbling so after carefully removing as many tiles that were worth saving I rebuilt the base with a new layer of cement.

Victorian Tiled Pathway During Rebuild Cardiff Victorian Tiled Pathway During Rebuild Cardiff

Once the new base was dry I was able to start Tiling as normal, I had taken photographs of the original pattern, so I was able progress quite quickly.

Victorian Tiled Pathway During Rebuild Cardiff Victorian Tiled Pathway During Rebuild Cardiff

Once the central pattern had been laid I progressed onto the edges which took longer to lay due to the complex pattern. Once all the tiles were laid and the adhesive had set I was able to move onto Grouting.

Victorian Tiled Pathway During Rebuild Cardiff

Cleaning a Victorian Tiled Path

Once the tiles were laid and grout had set I was able to move onto cleaning the whole path starting with an acid wash using Tile Doctor Grout Clean-up to remove any grout smears left over from the grouting and also to counter act any salts within the tile which could cause problems later.

After a rinse with water the path was then give a good scrub with Tile Doctor Pro-Clean which is a heavy-duty Tile and Grout cleaner that worked well to brings out ingrained dirt.

Sealing a Victorian Floor Sealing

The path was left to dry off overnight and I came back the next day to seal them, I left protection over the path each night after leaving and fortunately we experienced a rare spell of decent weather that week.

The sealer I chose was Tile Doctor Colour Grow, it’s fully breathable, which is important when sealing tiles exposed to damp conditions and it’s a colour enhancing sealer which brought out the best in the red quarry tiles as well as giving good protection to the tile surface.

Victorian Tiled Pathway After Rebuild Cardiff Victorian Tiled Pathway After Rebuild Cardiff

My customer was most impressed with the transformation and left the following glowing testimonial on the Tile Doctor feedback system.

“Julian was quick to respond to emails. He arrived on the date we arranged and was finished promptly. We had our hall tiles re-surfaced and the path completely relayed. Where possible outside Julian re-used the old tiles and when not then used new. The final finish is amazing and definitely gives a wow factor to the entrance to the property. Julian is trustworthy and I would highly recommend him and his work. Thanks for the hard work!
Nigel J, Cardiff 15 Jan 2018″

 
 

Victorian Tiled floor restored in South Wales



Source link

Original Victorian Tiled Hallway Thought Beyond Repair Rejuvenated in Cardiff


Many property owners who are lucky enough to have an original Victorian tiled floor in their homes face the same conundrum: can an old and potentially very damaged floor be salvaged and restored to peak condition or should I replace it?

Some people would instinctively tell you that the answer is no – even trained professionals! In fact, a leading tile restoration company (which shall remain unnamed) based in Cardiff told a recent customer of mine that her original Victorian tiled floor, dating back to 1905, was beyond repair. The company recommended that she not waste any money on having it restored and instead that she should have it ripped up and replaced.

Victorian Tiled Hallway in Cardiff Before Restoration

It was in a bad state, however replacing the floor would incur a significant cost and the original characteristics of the period floor would be lost. The customer was feeling rather deflated and was left undecided on what to do. Fortunately after browsing the web for a solution, she came across Tile Doctor and I was asked to pop over and take a look.

I visited the customer at her home and removed parts of her hallway carpet to get a better look at the Victorian tiles beneath. The floor was certainly in a very poor state, there were many old paint splash marks covering the tiles and the surface of the floor was deeply darkened after many years’ worth of wear and tear. In my opinion however, it was still salvageable, and the customer was happy to see what could be done.

Cleaning an Original Victorian Tiled Floor

A week before I was due to start the restoration, I asked the customer to remove the foam-backed carpet to let the floor breathe a bit.

Before beginning the work, I ran a few damp tests and the floor proved surprisingly dry considering how old it is and the very probable lack of a damp proof membrane. I started by manually scraping as much of the old paint staining off the stone as possible and cleared other debris from the surface.

Knowing that clay based Victorian tiles like these easily soak up paint splashes, I knew it would take a thorough clean to remove them completely. I firstly soaked the floor with water and left it to dry slightly before mixing a concoction of Tile Doctor NanoTech HBU, Tile Doctor Pro-Clean, and Tile Doctor Remove and Go.

NanoTech HBU is a particularly powerful cleaner which uses nano-sized particles to penetrate the pores of the stone, while Pro-Clean is an alkaline-based cleaner that tackles heavy soil build-up. Remove and Go is a multi-purpose product which both cleans and strips away any old sealer.

I left this mixture to dwell on the floor for around half an hour, scrubbed it in firstly using a black scrubbing pad fitted to a rotary machine and then a wire wool pad. I followed by rinsing the products off with water and extracted up the excess with a wet vacuum machine.

This technique was repeated until I was satisfied with the condition of the floor.

Sealing an Original Victorian Tiled Floor

After leaving the floor to dry off completely overnight, I returned to the property the next day to carry out the sealing process. I applied seven coats of Tile Doctor Seal and Go, which not only adds a protective covering to the tile, but also enhances its appearance.

The customer was absolutely thrilled with the results of the restoration, especially considering that she was told the floor was ruined by a leading company and not worth saving.

Victorian Tiled Hallway in Cardiff After Restoration

I think you will agree that its always worth trying to restore a period floor and my customer deserves praise for sticking to their guns.
 
 

Professional Period Victorian Hallway Floor Restoration in South Wales



Source link