Slate Tiled Floor Rejuvenated at New Barn Conversion in Farnham


Converting a barn into a property can be an exciting project, but it certainly doesn’t come without a range of challenges. If done correctly, they can look amazing and are well worth the effort.

A recent customer of mine had spent the last six months converting a barn into a residential property in the West Surrey town of Farnham. While the project had been a big success, the house had been subjected to high traffic from dozens of carpenters, electricians and builders. This had taken its toll on the newly installed Slate tiled floor – so the property owner asked me to restore it to its peak condition to complete the conversion once and for all.

Slate Tiled Floor Before Cleaning Farnham

Before accepting the job, I strongly advised the customer that I should be the last workman out of the door. In my experience few tradesmen are known to take care of other peoples work and any further work being done in the property could potentially spoil the appearance of the Slate tiles.

Slate Tiled Floor Before Cleaning Farnham

Cleaning a Slate Tiled Floor

The customer was happy for me to proceed, so on the agreed date I returned and started the work by laying down a strong dilution of Tile Doctor Pro-Clean across the floor. Pro-Clean is an alkaline-based cleaner which breaks down all manner of dirt and grime.

This was a large area of tiles, so I worked on individual sections of 3m2, first soaking the Slate in Pro-Clean and then waiting ten minutes for it to soak in and then following with a nylon black scrubbing pad fitted to a 17-inch rotary buffing machine to work the cleaning product into the stone. The tiles immediately came up looking much cleaner. Any excess water and chemical slurry was vacuumed up promptly with a wet vacuum.

The tiler had done a good job of laying the floor and removing any excess grout as normally my next step at this point would be to give the floor an acid wash, but it wasn’t necessary.

Once the tiles had been cleaned to the best of my abilities and given a thorough rinse, I left the property for 48 hours to allow any water that had seeped into the tiles to evaporate. This is important as excess moisture problems can prevent the tiles from being sealed correctly.

Sealing a Slate Tiled Floor

On returning to the property a couple of days later, I swept away any bits of dust and debris and then proceeded to seal the tiles with Tile Doctor Colour Grow.

Slate Tiled Floor After Cleaning Farnham

This impregnating, colour-intensifying sealer enhanced the stunning natural brown, gold and orange shades in the stone. Two coats of the sealer were applied to achieve a brilliant natural-look finish and robust protection against future wear and tear.
Restoring the appearance of these Slate tiles put the finishing touches on this fantastic barn conversion. Needless to say, the customer was very pleased with the results.

Slate Tiled Floor After Cleaning Farnham
 
 

Recently Laid Slate Tiled Floor Given Builders Clean to Restore Appearance in Surrey



Source link

Large Travertine Floor Polished at an Eaton Barn Conversion near Congleton


This customer who lives in Eaton near Congleton had a new barn conversion built with a 120 sq. meters of polished Travertine floor tiles. Unfortunately, he was unable to appreciate the beauty of the floor due to builder’s walking all over them for a few weeks without any protection. With dirt being trodden into the tile they were now in need of a deep clean and polish to bring back the shine and restore the real beauty of the tiles.

Polished Travertine Floor Before Cleaning Eaton Polished Travertine Floor Before Cleaning Eaton

Cleaning and Burnishing Polished Travertine Tiles

After giving the floors a good brush to remove grit etc. the next stage was to apply a set of tile doctor diamond encrusted burnishing pads to take off the ingrained dirt and restore shine to the tiles.

The first pad was a coarse 400 grit which fits onto a rotary machine with water spread on the floor as lubrication. The pads literally scratch off the dirt and the resultant slurry is then removed with a wet vacuum. The floor is then washed and the process was repeated with the next two pads which are 800 and 1500 grit. These pads are much finer and restore the finish of the stone, again the floor is rinsed in between each pad to remove the slurry each time.

Polished Travertine Floor During Cleaning Eaton Polished Travertine Floor During Cleaning Eaton

The floor is then left to dry off overnight which is much quicker when underfloor heating has been installed.

Sealing a Travertine Tiled Entrance Hall

When I came back the next day I finished off the burnishing process using the last floor pad which is applied dry to the floor with a few squirts of water. This final pad is 3000 grit which is super fine and builds up a high gloss shine on the Travertine.

To finish off the process I then sealed the floor using a couple of coats of Tile Doctor Colour Grow which is an impregnating sealer that soaks into the Travertine occupying the pores and preventing dirt from becoming ingrained into the stone. Colour Grow also enhances the natural colours in the stone and in this case, it did a great job of bringing out the brown shades in the Travertine.

Polished Travertine Floor After Cleaning Eaton Polished Travertine Floor After Cleaning Eaton

The customer was over the moon with the finish and asked if I would come back in three weeks to buff the whole floor to a high shine ready for a party that evening.

Polished Travertine Floor After Cleaning Eaton Polished Travertine Floor After Cleaning Eaton

 
 

Professional Travertine Floor Polishing in Cheshire



Source link