Refreshing tired flagstone floor tiles

These photographs are of a Flagstone floor tiled floor installed at a house in Glasgow. They were well worn, looking washed out and overdue a deep clean and re-seal, there was also remnants of adhesive and paint and I suspect the floor had been covered in carpet at some point in the past.

Cleaning Flagstones in Glasgow

Cleaning Flagstone Floor Tiles

Working in sections the tiles were covered in Tile Doctor Remove and Go which as the name suggests is designed to safely remove coatings from tiles, this was left to soak in for a while before scrapping off the glue and paint from the stone surface using a wire brush and paint scrapers.

The second step was to scrub the floor using a strong dilution of Tile Doctor Pro-Clean worked in using a rotary bonnet machine fitted with a hard nylon brush attachment. The floor was then then rinsed down with clean water and the soiled solution extracted using and industrial wet vacuum. This process was completed three to four times to ensure all the dirt was removed.

The floor was then left to dry assisted by a turbo air mover and damaged pointing and cracks between the stone was patched up using a sand/cement mortar. The cleaning and repairing process took most of the day so once complete we left for the day leaving the turbo air mover switched on to ensure the floor would be nice and dry of the next day.

Cleaning Flagstones in Glasgow Cleaning Flagstones in Glasgow

Sealing Flagstones

We returned the next day and once we had checked the stone had dried we proceed to seal it using five coats of Tile Doctor Seal and Go which will protect the floor and also adds a nice sheen to the tile.

Cleaning Flagstones in Glasgow

 
 
Source: Residential and Commercial Tiled Floor Cleaning in Glasgow

Restoring a damaged Victorian Tiled hallway in South Wales

This is an original Victorian tiled hallway floor in Cardiff that dated back to when the house was built in the year of 1890. The previous householders of which had a radiator installed serviced by laying pipes right through the middle of the floor destroying the tiles as they went, they then back filled the channel with cement. On top of that many of the other tiles had been splashed with cement and paint.

Abused Victorian Floor Cardiff Before

Repairing Victorian Floor Tiles

My first job was to carefully remove the cement from the channel and to precisely cut back any old cement bedding and old cement grout away from any tile edges in preparation for the replacement tiles which fortunately I was able to get hold of.

Abused Victorian Floor Cardiff Before

After all the previous preparation I started carefully scraping off cement from all around the edges of the remaining tiles as well as gloss and emulsion splashes from the surface essentially giving the whole floor a thorough scrape with a hand held scraper vacuuming up the mess as I worked. Interestingly for a floor of its age I tested the floor in various places for moisture and found it to be perfectly dry.

Cleaning a Victorian Floor

To clean the floor I mixed three parts Tile Doctor Remove and Go with NanoTech UltraClean which basically adds small abrasive particles to a powerful sealer and coatings remover making it even more effective. This was applied to the whole floor and left to soak in for an hour making sure not to let it dry out by applying further amounts; leaving it to dwell for an hour gives it time to eat away at any dirt and coatings on the tile making the scrubbing processes easier.

To scrub the tiles I used a rotary machine fitted with a black scrubbing pad rinsing and extracting the soiled solution along the way. This cleaned up the tiles well however there were still some cement stains so this time Tile Doctor Grout Clean-up was applied to the floor in sections and left to ten minutes to dwell before working it in with another black scrubbing pad and rinsing off. This product is acid based so you can’t leave on the tiles for too long; once I was happy with the final result the whole floor was given a thorough rinse with plenty of clean water using a wet vacuum to extract the waste and dry the floor.

The channel was then filled with cement and once it had set replacement replica Victorian tiles from The Original Tile Company were installed. I then grouted the floor in a medium grey grout let the tiles become solid and the grout go hard before using a steam cleaner to make sure that I have removed all the tile doctor cleaning solutions prior to sealing.

Sealing a Victorian Floor Sealing

The customer wanted a semi-gloss finish so once I had tested the floor again to make sure it was dry I sealed the tiles with Tile Doctor Seal and Go which enhanced the colour of the floor tiles and added a nice sheen.

Abused Victorian Floor Cardiff Completed Abused Victorian Floor Cardiff Completed

As you can see the new tiles fitted beautifully and the old floor tiles cleaned up so successfully the difference is impossible to spot. It was a lot of painstaking work though taking five days to finish but well worth the result.
 
 
Source: Residential and Commercial Tiled Floor Restoration in South Wales

Victorian Tile Maintenance

This was a straight forward request to clean and re-seal a Victorian Minton tiled floor in Coventry. The tiles were in good condition but there were a few stubborn stains that needed dealing with.

Victorian Minton tiles cleaned and Sealed coventry Victorian Minton tiles cleaned and Sealed coventry

Cleaning Victorian Tiles

I used a concentrated dilution of Tile Doctor Pro-Clean to clean and strip the old sealer from the floor. It was first left to soak into the tiles for around 15 minutes before being scrubbed into the Victorian tile and grout using a slow speed rotary machine fitted with a scrubbing pad. The dirty solution was removed and the process repeated and grout lines scrubbed until I was happy the tiles were clean; this was then followed with a thorough rinse with water and a wet vacuum was used to remove the fluids and get the tile and grout as dry as possible. This process took most of the day so once the floor was clean I left for the day leaving it to dry overnight.

Sealing Victorian floor tiles

I came back the next day and after confirming the tiles had dried I began sealing them using six coats of Tile Doctor Seal and Go sealer which will provide stain protection as well as adding a nice shine to the floor. The interesting thing about Seal and Go is that’s it’s a water based sealer so you don’t get a smell as it dries.

Victorian Minton tiles cleaned and Sealed coventry Victorian Minton tiles cleaned and Sealed coventry

 
 
Source: Maitaining Victorian Tiles in Warwickshire

Victorian Tiled Floors in Southport

Southport is an interesting seaside town with many Victorian terraced properties so it came as no surprise when I was asked to maintain a Victorian Tiled hallway in the town.

Cleaning a Victorian Floor Tiles

The floor was in good condition for its age and just in need of a clean and re-seal to keep it looking good, hallway area’s as you can imagine get more footfall than other parts of the house so are more likely to need a regular deep clean.

Victorian Tiles Southport Before Cleaning

To get the floor clean and remove any remaining sealer the floor was sprayed with Tile Doctor Remove and Go which was left to soak into the tile for five minutes before being scrubbed in using a rotary machine fitted with a black scrubbing pad. The next step was to wash off the residue with water which was then removed using a wet vacuum. Following this the tiles were given a rinse in Tile Doctor Grout Clean-up which is an acid based product that can remove grout smears and mineral deposits, it also improves the ability of the sealer to bond with the tile. Last step before sealing was to give the floor a thorough wash down with clean water, which is designed to remove any trace of cleaning products before sealing; the water was removed with the wet vacuum and then left to dry overnight.

Sealing the Victorian Tiled Floor

The next day I returned and checked the floor for dampness using a Damp Meter which indicated the floor was dry and ready for sealing. For Victorian Floor tiles I recommend several coats of Tile Doctor Seal and Go which provides a low sheen finish whilst offering great stain protection.

Victorian Tiles Southport After Cleaning

 
 
Source: Cleaning a Victorian Tiled Floor in Stockport

Cleaning and Sealing Quarry Tiled Floors

The customer called me in to resolve a problem in at a beautiful holiday cottage in Cockermouth which had an old Quarry tiled floor installed which she had tried to make shine but had ended up turning it pink in places

Cockermouth Quarry Tiled Kitchen floor before cleaining 1 Cockermouth Quarry Tiled Kitchen floor before cleaining 2

Cleaning Quarry Floor Tiles

On my arrival I spent time protecting the kitchen units and adjacent wooden floor and then started on removing the old sealer with Tile doctor Remove and Go; I sprayed it on working in small areas and working it into the tile with a brush making sure to scrub it in well, the resultant soiled solution was washed off with clean water the and then removed using a wet vacuum. After finishing with the tile I moved onto the grout joints using the same process to make sure they were all clean and then the floor was given a good rinse to neutralise the floor before sealing. Again a wet vacuum was used to remove any liquids from the floor and it was then left to dry fully overnight.

Sealing Quarry Floor Tiles

The next day I returned to the cottage and after verifying the floor was dry with a damp tester it was sealed with four coats of Tile Doctor Seal and Go which provides on-going protection as well as adding a nice shine to the tile.

Cockermouth Quarry Tiled Kitchen floor after cleaining 1 Cockermouth Quarry Tiled Kitchen floor after cleaining 2

This job took me two days and whilst I was there I took the time to explain how to maintain the floor going forward and the importance of using a Neutral Cleaner to extend the life of the sealer. Certainly the customer was very happy with the results and left the following message our feedback system:

“Absolutely delighted the tiles were very marked in places but Heidi has managed to get them off and the tiles are back to their true colour which I hoped they would be. Heidi explained step by step the procedure and I am very pleased with the result Thank you very much for the time spent and I would recommend Heidi — Veronica”
 
 
Source: Professional Quarry Tile Cleaning Service in Cumbria

Cleaning and Polishing Terrazzo tiles

This Terrazzo tiled vestibule in Glasgow was completely dull and lacking colour when we arrived, this area probably see’s the most foot traffic in the house so it must of seen a fair amount of wear and abuse over the years.

Terrazzo tiled vestibule in Glasgow before cleaning

Cleaning Terrazzo Tiles

Terrazzo is a very hard surface and needs to be burnished in the same way as you would treat Marble or Travertine, before we could do that thought we needed to remove any loose debris etc. that could scratch the surface during the burnishing process to the first job was to sweep out the area with a brush and vacuum up any loose debris etc.

It was a very tight area so use of our large Bonnet machine was ruled out and we opted instead for a small handheld rotary machine fitted with the diamond encrusted burnishing pads. The burnishing pads come in a set of four and you start with a coarse pad with a little water and work your way through the set moving from a the coarse pads through to the less abrasive pads; this process polishes the stone more and more until you get a smooth finish. After each pad was used the area was thoroughly rinsed with clean water to remove any excess polish before moving onto the next, once we had gone through all four pads the floor was left clean ,smooth, and shiny.

Sealing Terrazzo Tile

Once the burnishing process was completed we proceeded to seal the stone with two coats of Tile Doctor Colour Grow which is a colour enhancing sealer designed to protect the stone whilst lifting the natural colours.

Terrazzo tiled vestibule in Glasgow after cleaning

Although quite intensive due to the space restriction it was quite a small area so it took just less than a day to complete.
 
 

Source: Terrazzo Tile Cleaning in Glasgow

Curing Slippery Tile Problems

Last week we were asked to carry out a demonstration of our AntiSlip Treatment for a lady in Ashtead Surrey. She has white shiny Porcelain tiles laid on a patio area and when they get wet they are really slippery and dangerous and she was especially concerned about young children hurting themselves. We carried out a test patch for her and asked her to see if she could slip, not only did she try, but her gran and mother-in-law also tried and were extremely impressed. I left her with our quotation so she could discuss it with her husband. The next day I received a call asking me to go ahead and carry out the works.

Applying the Anti-Slip Solution

When applying this treatment it is vital that you follow all the guidelines and times for the different types of stone. It is a 3 stage application, the first is the primer which is mixed 4 : 1 which we scrubbed into small areas of about 6m2 at a time, when scrubbing we used a brush head on our rotary scrubbing machine which has the added advantage of cleaning the tiles.

Shiny Slippery Porcelain Tiles in Ashtead26

After about 5 minutes of scrubbing using a scrubbing pad we then vacuumed it all and left the tiles to dry and because we were outside in the sun it didn’t take long to dry. The next stage is to apply the Antislip treatment and for this we used a flat mop and for these type of tiles we needed to leave it to dwell for between 3 and 5 minutes, but we had to make sure that it did not dry in.

After the dwell time the 3rd stage is to scrub in another solution of the primer, but this time it locks in the Antislip. When you are scrubbing this stage you can feel the treatment working. Once we have completed this stage we vacuum it all up then rinse the area with fresh water to remove any residues.

Applying Anti Slip to Shiny Slippery Porcelain Tiles in Ashtead33

The complete area was around 50m2 and luckily the treatment package covered this area. In all the application took two of us around five hours to complete and after clearing our equipment away we then put all the garden furniture back in place.

We returned the next day because the customer also asked us to clean their driveway and the patio area was wet because of rain, but it was great to walk on and I did not slip at all.

Shiny Slippery Porcelain Tiles in Ashtead41

The customer was really happy, because if the treatment hadn’t worked her only other option would have been to rip up the tiles and replace them at a cost of thousands and to make things even better for her, this treatment will last around 4 years before she needs to have it re-applied.

Applying Anti-Slip Tile Treatments in Surrey

Maintaining Encaustic floor tiles

On a visit to a customer to a customer in Beckenham, Kent who had a pair of rugs that needed cleaning I was asked to take a look at her Encaustic kitchen floor tiles which had become dull and she couldn’t keep them clean. I carried out a demonstration on how I would clean them and also explained the different sealer options available and how each sealer can have a different effect. She was pleased with the demonstration and engaged me to clean the tiles as well as the rugs specifying a sealer that would leave a sheen on the tile.

Encaustic Floor Tiles Before Cleaning

Cleaning black Porcelain floor tiles

I set about scrubbing the floor using a hot water dilution of Tile Doctor Pro-Clean Tile and Grout cleaner combined 50:50 with NanoTech UltraClean which adds tiny abrasive particles to the solution to make a more effective cleaning product. The solution was worked into the tiles by scrubbing with a rotary machine fitted with a black scrubbing pad and a stiff hand brush was used along the tight grout lines. The soiled solution was removed using a wet vacuum and floor thoroughly rinsed down with clean water. The tiles were then left to dry with the aid of a Turbo Air blower to help speed up the drying time.

Encaustic Floor Tiles Before Cleaning Encaustic Floor Tiles Before Cleaning

Sealing Encaustic Floor Tiles

Once the tiles were dry I applied five coats of Tile Doctor Seal and Go which is a water based protective sealer that doesn’t give off any odour and produces a nice low sheen the customer was looking for.

Encaustic Floor Tiles After Cleaning

The final result was one happy customer with a clean easy to maintain tiled floor and two clean rugs as well.
 
 
Source: Cleaning and sealing Encaustic floor tiles

Removing Limescale from Mosaic tile and Stone

This property in London N6 had been rented out previously by the owners and they were now renovating it before moving back in, this work included a wet room which had glass mosaic floor tiles and a dark Basalt tile laid on the wall. The main problem had been a general lack of maintenance over the years which led to a major unsightly build-up of lime scale throughout the wet room. We agreed to do the work but had to explain to the client how difficult the work would be and set their expectation for only an eighty percent improvement. I must apologise in advance for the quality of some of the photographs on this page, the size of the room, low lighting a nature of the stone surfaces didn’t lend themselves well to being photographed.

Mosaic Tiled Floor and Basalt Tiles Before Mosaic Tiled Floor and Basalt Tiles Before

Day 1 -Cleaning Basalt and Mosaic Tiles

Having protected all the chrome furnishings within the wet room we started to soak the Basalt tiled walls with Tile Doctor Grout Clean-Up followed by scrubbing and rinsing constantly with clear water. Grout Clean-up is an Acid based product so you do need to take care when doing this however it is particularly effective at shifting mineral deposits like Limescale. When we were satisfied this had removed the majority of soap scum and lime scale we proceeded to clean the Glass Mosaic floor tiles using the same method.

Day 2 -Polishing Basalt wall Tiles

The basalt tiled walls now needed to be restored back to their original factory condition using small diamond encrusted burnishing pads attached to a hand held polishing machine. We started with a coarse pad which removed any remaining Limescale which had impregnated the surface of the stone and moved onto the finer pads which polish the stone. Once this was complete the tiles were given a final clean with Tile Doctor Neutral Cleaner which is an everyday cleaning product designed for regular use on stone or sealed tiled surfaces.

Day 3 -Sealing Basalt wall Tiles

We came back on the third day and after making sure the Basalt tiles had dried we gave it a final buffing to restore the stone to a deep high gloss shine. The last step was to seal the Basalt tile in order to protect it and make it easier to clean in the future and for this we applied three coats of Tile Doctor Colour Grow which is an impregnating sealer that soaks into the pores of the stone.

Finally we used a rotary floor polisher fitted with a white buffing pad to buff the mosaic glass floor to a high shine.

Mosaic Tiled Floor and Basalt Tiles After Mosaic Tiled Floor and Basalt Tiles After

 
 
Source: Dealing with Limescale issues on Tile in London

Pamment Tile Cleaning

This Pamment tiled hall was in a Grade II listed former Manor House in the village of Creeting St Peter, there were three areas of floor requiring attention two having being recently laid and the other the original floor. Similar to Terracotta, Pamment tiles are made from Clay and have been traditionally used throughout Norfork and Suffollk.

pamment tiles before cleaning pamment tiles before cleaning

Cleaning Pamment Tiles

I started the job using a solution of Tile Doctor Pro-Clean, which is a heavy duty cleaner ideal for stone, tile and grout. The cleaner was diluted with water and left to soak into the Pamment tile and grout for about 10 minutes before being scrubbed in with a black pad fitted to a rotary machine. The soiled solution was then removed with a wet vacuum and washed down with clean water to neutralise the floor of any chemical; we repeated this process a couple of times and we also used a stiff hand brushes to clean up the grout lines. Once happy the floor was given a final rinse and left to dry overnight, A dehumidifier was left running to ensure that the floor would be dry enough to seal the next day.

Sealing Pamment Tiles

The next day came back to do the sealing and after checking the floor had dried sufficiently proceeded to seal it . Tile Doctor Seal and Go was used to seal the floor, it’s a water based sealer so it doesn’t give off an odour when it’s drying and also offers durable stain protection together with a low sheen finish which enhances the look of the tile. Like Terracotta Pamment tiles are very porous and took seven coats of sealer r before it was fully sealed.

pamment tiles after cleaning pamment tiles after cleaning

The work took two days in all and now the floor is much easier to maintain.
 
 
Source: Pamment Tiles Cleaned in Suffolk

Cleaning Cement Encaustic Tiles

This unusual Emery and Cie Cement Encaustic tiled floor in Ealing W5 had been poorly installed by the tiler with grout haze on the tiles and the wrong sealer used. Cement encaustic tiles are quite delicate and difficult to restore.

Cleaning Cement Encaustic Tiles

I used a red burnishing pad fitted to a buffing machine to cut into the tile surface and remove the grout haze and old sealer. The next step was to apply a dilution of Tile Doctor Pro-Clean letting it soak into the tile before working it in to the tile with a red buffing pad. The soiled cleaning solution was then removed using a wet and dry Vacuum and the floor washed down with clean water. This cleaned up the floor well but there were some stubborn stains which were removed using a steamer.

Cement Encaustics Before Emery and Cie Tiles After

Sealing Cement Encaustic Tiles

Once the floor had dried it was sealed using three coats of Tile Doctor Colour Grow which is a colour intensifying sealer that provides durable surface protection. Last step was to burnish the tiles again with a green burnishing pad to bring up the shine.

Although the floor had been too damaged to be made perfect, it was very much better when I had finished and the customer was delighted with the result.
 
 
Source: Cement Encaustic Tile cleaning in Ealing

Coffee Stains removed from Marble Tile

These Marble Tiles were laid in an en-suite bathroom at a house in Bridport, the main problems to be addressed WERE that the floor had dulled and lost most of its shine, there was also a coffee stain in the corner which needed to be addressed.

Marble EnSuite Floor Before

Removing Stains from Marble Tile

To remove the ingrained coffee stain we used Tile Doctor Reduxa, which is a penetrating stain remover used in conjunction with a heat gun, it can take a little time to work but its very easy to apply, I’ve copied the instructional video below so you can see for yourself.

Polishing Marble Floor Tiles

Before polishing the marble tiled floor we set about giving it a quick clean using a mild dilution of Tile Doctor Pro-Clean to ensure there was no grit on the floor that could lead to deep scratches when polishing. The floor was then rinsed with clean water to remove and chemical residue and we then began polishing the floor using a set of burnishing pads fitted to a heavy buffing machine. There are four pads in the set each encrusted with very fine diamonds, you start the process with the Red pad which is designed to remove sealers, followed by the White polishing pad for the removal of ingrained dirt then the Yellow smoothing pad and finally the Green polishing pad.

Sealing Marble Tiles

The floor was then washed down to remove any remnants from the polishing process and dried off so it could be sealed. To seal the floor we used a single coat of Tile Doctor Ultra Seal which is a premium penetrating sealer that gives a natural appearance and will provide long lasting stain protection going forward.

The customer requested the coffee stain removed and a high shine finish and was not disappointed, my photography skills aren’t brilliant but hopefully you can also see the improvement.

Marble EnSuite Floor After

 
 
Source Coffee Stains removed from Marble Tile in Dorset

Indian Orange Slate Floor in London

Restoration of a client’s slate floor

We were asked to take a look at cleaning and re-sealing an Indian Orange Slate floor at a property in London, the owner had struggled to find someone who would take the job on as they were unsure what they were dealing with and so called in Tile Doctor. This isn’t surprising as we do find that many so called Tile Cleaning companies only take on straight forward cleaning jobs where they can get in and out quickly without fear of complications.

Cleaning an Indian Orange Slate Floor

The floor was in reasonable condition and had simply dulled as the sealer had worn down over time and dirt became trapped in the pores of the tile and grout.

Indian Orange Slate Floor Before Cleaning Indian Orange Slate Floor Before Cleaning

We cleaned the floor using a strong dilution of Tile Doctor Pro-Clean Tile and Grout cleaner in conjunction with a scrubbing machine fitted with a black pad. This removed the old sealers and was followed with a thorough deep clean using our powerful truck mount high pressure cleaning machine to remove any residue soils and sealers etc.

Sealing an Indian Orange Slate

We left the floor for a couple of hours to dry and then we sealed it with six coats of Tile Doctor Seal and Go which is an ideal sealer for slate floors. We left the floor for thirty minutes in-between coats to allow it to dry. Once that was complete we attached a white pad to our buffing machine and polished the floor in order to harden the sealer and bring out the shine.

Indian Orange Slate Floor After Cleaning Indian Orange Slate Floor After Cleaning

The effects was quite dramatic and the customer who was obviously pleased with the results commented “Wow look at my beautiful floor, what a difference thank you very much for such a good professional job”.
 
 
Source: Indian Orange Slate Floor Restoration in London

Slate Flooring Care Suffolk

Slate Flooring Care in Whepstead

Some details below of a cleaning and sealing job we we did on a 43m2 Slate Floor in a kitchen/utility room in Whepstead, Suffolk.

This beautiful slate floor had been sealed several years ago, the sealer had worn and it was in need of some slate flooring care. The floor was cleaned with Pro-clean, it was a reasonably large and it tool around 2 litres to get it clean. We then left it to dry overnight and came back the next morning to seal it using 6x coats of Seal & Go consuming around 2 litres of the product.
 
 
Read more: Slate Flooring Care

Cleaning Terracotta Floor Tiles Near Boston

Details below of a terracotta floor cleaning job we did near Boston, that’s Boston in Lincolnshire which is small port on the east coast of the UK as opposed to Boston, Massachusetts which was given its name by emigrants from this area.

The tiles were expensive handmade terracotta tiles, a few of which contained finger prints that had been baked onto the tile during the manufacturing process. The owner had previously tried to seal the floor themselves using other products but was having difficulty and had delayed making use of their new kitchen extension until the floor could be sealed.

Terracotta Floor Tile Before Cleaning

Cleaning Terracotta Floor Tiles

To ensure a consistent finish we had to remove the previous sealer and make sure the Terracotta floor was clean it was scrubbed with a buffing machine assisted with Tile Doctor Pro-Clean which is an effective alkaline cleaner and sealer remover depending on the dilution. Cleaning the Terracotta floor tiles took a day to complete before being washed down with clean water to remove any remaining cleaner and neutralise the floor.

Terracotta After Cleaning and Sealing

Sealing Terracotta Floor Tiles

The floor was left overnight to dry and we came back the next day to apply a sealer to protect the tiles, sealing those pores that collect dirt and make them easier to clean. We used four coats of Tile Doctor Seal and Go for this; it’s recommend for Terracotta floors bringing out the colour in the tile whilst providing a Matt finish. The customer was over the moon with the results and can now move into their new kitchen and sealed tiles.
 
 
Source: Cleaning and Sealing handmade Terracotta floor tiles near Boston

Riven Slate Floor Cleaning in Lincoln

Riven Slate Floor Cleaning in Lincoln

Slate floors especially riven slate can be a nightmare to keep clean as the uneven surface of a riven tile traps dirt and makes it difficult to clean. Our client in Lincoln had this issue, however as you will see from the pictures below we managed to get it looking like new again.

Slate Floor Cleaning

The Slate Floor Cleaning process involved a good cleaning with Tile Doctor Pro-Clean Tile and Grout cleaner, it’s an alkaline rather than acidic product that doesn’t harm the surface of the stone but is very effective at cleaning. We left the product to dwell for a while before giving the tile a good scrub to lift the soil and dirt trapped into the pores of the riven slate floor tile. Once the slate tile and grout were looking clean we gave the floor a good wash down to remove any remaining chemical and neutralise the floor.

Slate Floor Before Cleaning and Sealing Slate Floor Before Cleaning and Sealing
Slate Floor Before Cleaning and Sealing

Sealing the cleaned Slate Floor

We left the floor to dry overnight and came back the next day to seal it using Tile Doctor Pro-Seal which is gives the floor a natural look and really lifts and reveals the colours in the slate. You can see from the photographs the difference and how amazing the colours are.

Slate Floor After Cleaning and Sealing Slate Floor After Cleaning and Sealing
Slate Floor After Cleaning and Sealing

The client was so pleased he has booked us in to return and do some more work for him.
 
 
Source: Slate Floor Restoration in Lincolnshire

Flagstone Floor in a Victorian House in Lancaster

Restoration of Flagstone Floor in the Kitchen

Details of an original Flagstone Floor cleaning job below from a Victorian House in the City of Lancaster, we often find flagstone floor tiles in kitchens and hallways and in this case they were in the hallway. You can see from the photographs below that the flagstone floor tiles were in a very bad state and it became clear that no amount of cleaning was really going to remove the decades of trapped dirt embedded in the pores of the Sandstone.

Flagstone Floor Before Cleaning Flagstone Floor Before Cleaning

Cleaning the Flagstone Floor

To get over this problem it was necessary to remove the top surface of the flagstone using a milling pad together with a small amount of Tile Doctor Pro-Clean. The flagstones were then washed down with water which was then removed using a wet and dry vax machine. There was no damp proof course under the tiles so I left it to dry for a week before coming back to seal.

Flagstone Floor After Cleaning Flagstone Floor After Cleaning

Sealing and Restoration of Flagstone Floor

The milling process had opened up the pores in the sandstone flagstone floor tile so to seal it I used 1 coat of Tile Doctor colour grow in order to bring out the colour in the stone and then topped this off wth a further 3 coats of Tile Doctor Seal and Go.
 
 
Source: Flagstone Floor Restoration in Lancaster

Courtyard Cleaning

Please read Cleaning Terracotta Floors before you proceed on this post.

Courtyard Tiles Cleaning Courtyard Tiles Cleaning

So we returned to the property to clean the courtyard area, which we deep cleaned with a jet wash machine and Tile Doctor Pro-clean solution. We started by mixing the Pro-clean with water and spread it over the surface scrubbing it with a Tile Doctor black scrubbing pad on our rotary machine. This was left to dwell for 30 minutes then we fitted our patio spinner to our jet wash and thoroughly cleaned and rinsed the complete area.

Courtyard Tiles Cleaning Courtyard Tiles Cleaning

Once again the customer was absolutely delighted with the result and as a result they now want me to maintain their floors on a yearly basis. They have also asked me to clean some other stone, wood and carpeted areas in their property, which will be done later this year.

The customer’s comments were:

“Thanks again Paul for another amazing job, we will be in touch soon with our next project for you to do, we now know that your standard of work is excellent and that you are honest, trustworthy and very hard working.”

Original Source: Courtyard Restoration in West Surrey.

Cleaning Terracotta Floors

This customer had a terracotta tiled floor in the kitchen, utility room and toilet, which hadn’t been sealed for 8 years and told us that the floor needed full restoration. On full inspection we also found that there was grout loose and missing and it was also different colours.

Terracotta Floor in the Kitchen Terracotta Floor in the Kitchen

The tiles were also stained with olive oil from cooking spillages.

Terracotta Floor in the Kitchen Terracotta Floor in the Kitchen

We started by giving the floor a deep clean by using Tile Doctor Pro-clean and scrubbing with deck brushes to remove all soils and old residue sealers. We then thoroughly rinsed the floor using our truck mounted machine and spinner tool. We had a problem of removing the oil stains from the tile as terracotta is very porous and had absorbed the like a sponge.

So we then applied Tile Doctor Remove and Go to the stained areas then sprayed with a light spray of water to help keep it moist and stop it drying out, we left this solution on the tiles for 90 minutes. After the dwelling time we steamed the floor as we rinsed off the Remove and Go. The next step was to rinse the complete floor with our truck mount cleaning system and a tile cleaning spinner tool. This thoroughly rinses and thoroughly cleans the floor with very hot water and high pressure.

We had to then tackle the grout problem, so we removed all loose and old grout, where needed and re-grouted the floor. This was left to dry for 48 hours to completely dry.

Then we applied 8 coats of Tile Doctor Seal and Go, leaving it to dry for 40 minutes between each coat. We returned the following day and re-coloured the grout with Tile Doctor beige grout re-colourant. This was then left to dry and a further 3 coats of Seal and Go.

Once this had dried we buffed the floor to harden the sealer and polish it. We used a Tile Doctor white pad and rotary cleaning and polishing machine to bring out the shine on the floor as shown in the pictures below:

Terracotta Floor in the Kitchen Terracotta Floor in the Kitchen

The customer was on holiday when we carried out the work, we had been dealing with the manager of the property, who when the customer returned was made to phone me, so the customer could thank me personally.

The customer’s comments were:

“I can’t believe how nice our floor looks and never thought it could look so good! “

They spoke to the manager of their property and have asked him to arrange with me another appointment as they wanted me to clean their courtyard area as well as they were absolutely delighted with their terracotta floors.
 
 
 
Original Source: Cleaning Terracotta Floors in West Surrey.

Quarry Tile Floor

I think you will be impressed with these photographs from a Quarry Tile floor we did recently. This quarry tiles were installed in the kitchen and went through to the dinning room, hallway and down stairs cloakroom, at total of around 40sq metres

The tiles were recenctly installed and the customer called us in because they were unhappy with the finished result. This can be a common problem with Tilers who do a great job of levelling, tiling and grouting a floor but struggle on their knowledge of sealers. They were hoping for a high gloss finish but were left with a very dull and patchy floor.

Quarry Tile Cleaning

We stripped the entire floor first using Tile Doctor Pro-Clean assisted by a rotary machine fitted with a black pad. This removed most of the sealer, however, we encountered more problems with grout haze which had been trapped underneath the sealer and had not been cleaned off properly to begin with. Also there were still patches of the original sealer which had been applied over a damp floor. The grout haze was removed by hand with wire bushes and more Pro-Clean and then the entire area was blanket stripped. This is an interesting technique unique to Tile Doctor which involves applying Remove and Go mixed with Nanotech Ultra-Clean to tiles and then covering in plastic sheeting and left for several hours to allow to soak into tiles. We then used a steam stripper and a wet vacuum to pick up to remove and rinse off the products. The area was then left to dry for 2 days assisted by dehumidifiers.

Quarry Tile Sealing

After this time we returned to site to take damp metre readings and once we were happy that all areas were dry, we then applied 5 coats of Tile Doctor Seal and Go to protect floors and provide the high gloss finish that the customer requested.

Quarry Tiled Floor Restoration in Northamptonshire

 
 
 
Original Source: Quarry Tile Floor by Tile Doctor Northamptonshire.