London Marathon 2018


Heidi Taylor raising money for Cancer Research UK in the 2018 London Marathon

Heidi Taylor raising money for Cancer Research UK in the 2018 London Marathon

Hello, After years of trying Tile Doctor Heidi Taylor has finally been accepted into the 2018 London Marathon which takes place on Sunday 22nd of April 2018.  She is running it for a very personal cause and it couldn’t have happened at a more apt time – her father has been treated for Cancer and so have others close to her. Everyone knows someone whether its a friend, family or work colleague who has been effected. Please help smash the target – Thank You all in advance

You can help Heidi Taylor raise money for this great cause by donating directly to her fundraising page – https://www.justgiving.com/fundraising/heidi-taylor2017.  JustGiving sends your donation straight to Cancer Research UK and automatically reclaims Gift Aid if you are a UK taxpayer, so your donation is worth even more.

Thank you for your support!

Heidi Taylor in Training for the 2018 London Marathon raising money for Cancer Research UK

Heidi Taylor in Training for the 2018 London Marathon raising money for Cancer Research UK



Source link

Polishing Dull Limestone Floor Tiles to a High Shine in Boxworth


Boxworth is a very small village situated to the north-west of Cambridge. In the Middle Ages, it had a significant population, but in the modern day there are only around 100 houses in the area including one belonging to my customer.

I was there to take a look at a large installation of Polished Limestone floor tiles which had been laid throughout the ground floor including the Kitchen, Dining, Utility room and hallway.

Limestone Tiled Kitchen Before Polishing Boxworth Limestone Tiled Dining Room Before Polishing Boxworth

Many people will already know that Limestone is a premium, yet somewhat sensitive natural stone. It’s also porous, meaning that dirt can easily become ingrained if the tiles are not sealed properly, or if the sealant has worn away. This leads eventually to a very unappealing, dirty, and dull appearance which often happens so slowly it hardly get’s noticed until one day you think, “I’m sure my floor looked better than that before!”.

Limestone Tiled Hallway Before Polishing Boxworth Limestone Tiled Utility Before Polishing Boxworth

In this case the sealer had degraded over time and my customer had called me in because she was now no longer happy with the appearance of the tiles. The lustre the tiles once had eventually disappeared and there was also damage in some areas caused by the placement of table and chair legs. I was asked to restore a high-quality polished finish to the tiles.

Cleaning and Burnishing Limestone Tiles

Before beginning the restoration, I took the necessary precaution of covering the walls and kitchen units to protect them from exposure to any cleaning products or mess.

To begin, I applied Tile Doctor Remove and Go, which is a high-performance stripping agent, to break down any old sealant remaining of the tiles. This product can also be used to clean the stone itself, as well as the grout lines.

After completing the initial cleaning process, I moved on to restoring the polish to the tiles. At Tile Doctor, we do this using a system we have developed called Burnishing. This system involves the application of Diamond encrusted pads – each possessing a different level of grit – to grind away the dirt from the stone, which is often stained or damaged. The process effectively resurfaces the stone leaving it looking new and fresh.

Firstly, I applied the Coarse 400 grit pad, fitted to a rotary machine, to grind away any excess muck and sealant lubricated with a little water. The resultant slurry was rinsed away and I followed up with the application of the Medium 800 grit pad to start the restoration of the polish again with a small amount of water, followed by the Fine 1500 grit pad for the second polish.

Finally, I applied the Very Fine 3000 grit pad to achieve the most refined and highest quality polish possible. The process of burnishing is a gradual but highly effective means of achieving this kind of finish.

Any slurry that was created through this process was removed using my truck-mounted hot water cleaning and extraction machine, resulting in minimum mess.

Sealing Limestone Tiles

After burnishing the tiles and to achieve a really hard wearing and high polish I covered the floor in Tile Doctor Shine Powder crystals and buffed them into the Limestone tiles using a White buffing pad. Then to give the floor extra protection I applied a coat of Tile Doctor Colour Grow, which impregnates the pores of the stone to prevent ingrained dirt.

Colour Grow also intensifies the natural colours in the Limestone, thus improving the appearance of the stone to an even greater extent. Following the application of Colour Grow, I gave the tiles a final light buffing with a soft red pad.

Limestone Tiled Kitchen After Polishing Boxworth Limestone Tiled Utility After Polishing Boxworth

The customer was extremely happy with the outcome, remarking that the work was carried “quickly and efficiently with no fuss.” I took lots of photographs of the process, so you can really appreciate the difference that was made.

Limestone Tiled Hallway After Polishing Boxworth Limestone Tiled Dining Room After Polishing Boxworth

 
 

Professional Polishing of a Dull Limestone Tiled Floor in Cambridgeshire



Source link

Cleaning a 90m2 Spanish Terracotta Tiled Kitchen Floor in Alderley Edge


According to the Mirror Newspaper Alderley Edge with its restaurants and bars is a playground for footballers; well I certainly didn’t bump into any on a recent visit there to clean and seal this lovely Spanish Terracotta Tiled Kitchen floor.

Joking aside it is a very nice area and fortunately for me the residents are very partial to stone floors. Getting back to the post, we were asked for advice on cleaning and sealing ninety square metres of Spanish Terracotta tiles that had been installed in this kitchen four years prior. The sealer had since worn off and the floor was becoming difficult to clean effectively.

Terracotta tiles are made from soft clay making it very porous and likely to absorb anything that lands on it; as a result, it’s important to maintain the sealer to stop this happening.

Deep Cleaning a Spanish Terracotta Tiled Kitchen Floor

To clean the floor, I soaked the tiles in a strong dilution of Tile Doctor Remove and Go which is a strong stripping and cleaning solution which removes old sealers and also draws out ingrained stains.

Spanish Terracotta Floor Tiles During Cleaning Alderley Edge

After twenty to thirty minutes the solution was worked into the tiles using a black scrubbing pad fitted to a rotary machine. The soiled solution was then removed with a wet vacuum and this was followed by scrubbing the grout lines with Tile Doctor Pro-Clean and a grout brush until they were clean.

Spanish Terracotta Floor Tiles During Cleaning Alderley Edge

The whole floor was then rinsed with water to remove any soil and trace of cleaning product. The water was then extracted using the wet vacuum. The floor was then checked to make sure it was as clean as it could be and stubborn areas spot treated.

Spanish Terracotta Floor Tiles After Cleaning Alderley Edge

Sealing a Terracotta Tiled Kitchen Floor

The floor was left to dry off overnight and we returned the next day and tested the tiles with a damp meter making sure it was dry before we could seal it. To seal the floor I first applied a single coat of Tile Doctor Colour Grow which soaks into the pores of the tile to enhance its colours. Once this was dry it was followed up by multiple coats of Tile Doctor Seal and Go which adds further protection and adds a nice sheen to the tile.

I took some time to complete due to the porosity of the Terracotta requiring nine coats before the tiles were fully sealed but once done it was transformed and I left a very happy costumer. A quick tip here is that you can always tell when a tile is fully sealed by adding a small drop of water to the tile, if it forms into a bubble then it’s fully sealed.

Spanish Terracotta Floor Tiles After Cleaning and Sealing Alderley Edge
 
 

Renovating a Large Spanish Terracotta Tiled Kitchen Floor in Cheshire



Source link

Badly Stained and Pitted Tumbled Travertine Kitchen Floor Renovated in Clophill


Travertine floor tiles are very appealing but without the protection of a sealer they will soon suffer, fortunately this can be remedied as demonstrated in these pictures of a Tumbled Travertine floor at a house in the Village of Clophill in the Flit River Valley South of Bedford.

This customer had called me out as her ten year old floor was looking very sorry for itself and she was concerned that a lot of holes were appearing which was making cleaning of the floor difficult as dirt was getting trapped in the holes. I went over and carried out a test clean on two separate tiles in the kitchen and the customer was amazed at how clean they came up and especially the grout. An appointment was made for the next month and work commenced.

Tumbled Travertine Kitchen Floor Before Cleaning Clophill Village

Cleaning a stained Tumbled Travertine tiled floor

The first thing we do is to protect the lovely Oak kitchen units by removing plinths, covering base units and appliances with a protective film. We then commenced work by burnishing the stone with a set of Tile Doctor Diamond encrusted burnishing pads. The pads are applied individually to each tile in sequence starting with a coarse pad and finishing with the fine pad which brings up the polish. A little waster is used to lubricate the process along the way and the floor is rinsed in-between each pad with the resulting residue extracted from the floor using a wet vacuum. The process takes quite some time but the results are well worth the effort.

Tumbled Travertine Kitchen Floor Before Cleaning Clophill Village Tumbled Travertine Kitchen Floor Before Cleaning Clophill Village

Once this was done our attention was turned to the grout which being recessed is difficult to reach by with pads. So for the grout a medium dilution of Tile Doctor Pro-Clean is applied to the grout lines and scrubbed in with stiff brushes by hand.

The floor was rinsed again and fans were used to assist drying before filling the holes with the same filler the customer had used previously to match the colour of the stone as much as possible.

Sealing a Travertine tiled floor

When we returned the next day the floor had dried and we were able to give the floor a final polish with a very fine burnishing pad. The floor was then sealed with two coats of Tile Doctor Ultra Seal which provides excellent protection without changing the colour of the stone to provide a natural look.

Tumbled Travertine Kitchen Floor After Cleaning Clophill Village

My customer was delighted with the results and kindly left the following testimonial on the Tile Doctor Feedback system.

“We had several rooms of very dirty travertine tiles that were deep cleaned, filled and re sealed. The floor now looks amazing. Fantastic job by a professional and friendly team.”

Tumbled Travertine Kitchen Floor After Cleaning Clophill Village Tumbled Travertine Kitchen Floor After Cleaning Clophill Village

 
 

Stained and Pitted Travertine Kitchen Floor Restoration in Bedfordshire



Source link

Edwardian Geometric Tiled Office Hallway Floor Renovated in Newark


Here we have a small Edwardian Tiled Hallway located in a busy office building in the market town of Newark in Nottinghamshire. We were asked to come over and inspect the floor for renovation. Our subsequent survey highlighted inherent damage, historic wear and staining as well as salt staining from efflorescence. On top of that there were some loose tiles along a door threshold that would need fixing.

Keen to get the floor restored we were given the approval to start the work and agreed on a date to return.

Restoring an Edwardian Tiled Hallway Floor

On our return we started by lifting the loose tiles and cleaning up the recess of debris before re-fixing the tiles using fast setting adhesive & grout. Within half an hour the tiles were set and we were able to start our intensive cleaning process.

Edwardian Geometric Tiled Hallway Floor Newark Before Cleaning

The first part of the cleaning process was to apply a strong dilution of Tile Doctor Remove & Go coatings remover allowing it to dwell and soak into the tiles for thirty minutes. The solution was then agitated using a black scrubbing pad to help break down the historic-soiling that had been hiding the original colour of the tiles and also remove any old sealers.

There were paint spots and adhesive residues on the surface of the tile which we were now able to scrape off the after being softened by Remove & Go. The resulting slurry was vacuumed away and the floor was cleaned down with water to remove the suspended soils and cleaning product residues.

To deal with the salt staining Tile Doctor Acid Gel was liberally to the tiles and left to dwell for a long time in order to neutralize both the cleaning residues and to dissolve the efflorescence salts. We had warned the customer that because efflorescence salt staining was present it was a likely indication of inherent moisture under some of the tiles and we were able to confirm this with the use of a damp meter.

It worth noting that these old floors did not have damp proof membranes installed and were designed to allow moisture vapour to pass from the sub floor to the surface of the tiles. Under normal use this was manageable by the Victorians & Edwardians. Unfortunately since that date a lot of these floors have at some point been covered by other floor coverings such as modern hard floors or carpet etc. This causes a build up of moisture to develop and efflorescence to form. Over time this causes crystalline salt capillaries to form a foothold in the tile causing damages that can affect the tiles physically as well as a loss of colour.

Once the tiles were cleaned of Acid Gel and rinsed with water again to remove any trace of product the floor was then dried as much as possible with a wet vacuum to remove moisture.

Sealing an Edwardian Tiled Floor

After leaving the floor to dry off overnight I came back the following day to apply a sealer which would protect them from staining, ingrained dirt and make them easier to clean and going forward.

Knowing that efflorescence would be an issue I had already decided to use a fully breathable sealer to aid moisture transmission from the sub floor. In this instance we used our low maintenance Impregnating sealer Tile Doctors Colour Grow applying 3 coats to provide long term protection to the floor.

Edwardian Geometric Tiled Hallway Floor Newark After Cleaning

The work took us two days to complete and before leaving our customer was given instructions on how to clean the floor in future using Tile Doctors pH Neutral Floor Cleaning Solution which is highly effective on soiling but most importantly it’s not acidic and so will not damage the integrity of the sealer. It’s worth pointing out that many household cleaning products, and also high-street branded cleaning products, can quickly damage floor coatings; they can also leave residues on floors that contribute to rapid re-soiling.
 
 

Original Edwardian Hallway Office Floor Restored in Newark, Nottingham



Source link

Beautiful Black and White Victorian Tiled Hallway Renovation in Monmouth


This beautiful black & white Victorian tiled hallway was recently discovered hidden under carpet at a house near Monmouth. As well as the years of grime that had become ingrained in the tile, the carpet had been secured with carpet grippers which had been fixed on top of the tiles and the owner was keen to recruit my help in its restoration.

It’s a lovely drive up through the Wye Valley from my base in Caldicot to the town of Monmouth which has a long history that goes back to the Roman times. In fact it’s famous for its “Monnow Bridge” which dates back to medieval times and is the only remaining stone gated bridge of its type left in Britain. Needles to say it has a strong mixture of architecture with many old houses built during Victorian times.

Victorian Floor Before Renovation in Monmouth

Cleaning an Original Victorian Tiled Hallway Floor

The first step in cleaning the floor was to prepare it for cleaning by carefully removing the old carpet grippers and adhesive deposits using a handheld scraper. This was followed by creating a mixture of two powerful cleaning products namely Tile Doctor Remove and Go and NanoTech HBU remover. Remove and Go is a coatings remover designed to strip off old sealers whilst NanoTech HBU is a powerful Heavy Build-Up Remover that uses tiny abrasive particles to clean up tile and stone.

The floor was smothered in the cleaning solution and it was allowed to soak into the tile for about twenty minutes before scrubbing it in. It was not an exceptionally large hallway so a lot of hand scrubbing was required to get the floor as clean as possible. The cleaning solution was rinsed off with water and then extracted using a wet vacuum or wet vac as my colleagues often refer to it.

To finish off the cleaning process I scrubbed a dilution of Tile Doctor Pro-Clean into the grout lines to get them as clean as possible and then gave the floor a final rinse. I need the floor to be dry before sealing so using the wet vac I extracted as much moisture from the floor as possible.

Sealing an Original Victorian Tiled Hallway Floor

I left the floor to dry completely overnight and returned the next day to finish the floor off with a few coats of sealer. On my arrival I started by taking a few reading with a damp meter to ensure the floor was ready to be sealed. Fortunately by efforts with the Wet Vac the night before had paid off and it confirmed the tiles were dry and ready to be sealed.

To do this, I used multiple coats of Tile Doctor Seal and Go which works really well on Victorian Tiles and adds a nice low sheen that brings them up nicely. Naturally the sealer not only improves the way they look it also makes them much easier to clean and will protect them against ingrained dirt and staining.

Victorian Floor After Renovation in Monmouth

I think you will agree this old floor has been transformed and now has a new lease of life.
 
 

Professional Renovation of a Carpet Covered Original Victorian Tiled Hallway in Monmouthshire



Source link

Slate Tiled Conservatory Floor Covered in Sticky Oil Residue Restored in Bicester


A recent customer of mine had a Slate tiled conservatory that had not been used in a long time since it had become covered in a sticky oil residue and couldn’t be walked over. I can’t go into detail as to how it became it this sate however suffice to say my customer had not been successful in removing it and having tried a number of products and suggestions had decided to call in their local Tile Doctor to remedy the situation.

The customer lives in Bicester just off Junction 9 of the M40 and famous for its Bicester Village outlet shopping centre, which has recently been expanded and is popular for containing discount retail outlets for several major designer clothing stores as well as restaurants and coffee shops.

Slate Conservatory Floor Before Cleaning Bicester

Cleaning Conservatory Slate Tiles

I could see this was going to be a tricky job so to begin, I created a cocktail of cleaning products consisting of Tile Doctor NanoTech HBU and Tile Doctor Oxy-Gel. NanoTech HBU is one of our most powerful cleaners (HBU = Heavy Build-Up) as it uses Nano-sized particles to penetrate deep into the pores of the stone to release ingrained dirt. Oxy-Gel is an alkaline-based cleaner and degreaser, which helps to break down oily and sticky residues.

I applied this cleaning solution across the floor and left it to work its magic for about four hours. Next, I rinsed the floor with fresh water and extracted the soil using a wet vacuum before proceeding to clean the tiles again using a strong dilution of Tile Doctor Pro-Clean.

Once again, I rinsed away any remaining chemicals with fresh water, before giving the floor an acid wash using Tile Doctor Grout Clean-Up. Giving the stone and Acid Wash removes grout smears, mineral deposits and efflorescence and really gets the stone clean. After completing the cleaning process with another rinse, I left the floor to dry for a couple of days.

Sealing Conservatory Slate Tiles

On my return to the property 48 hours later, I treated the tiles to fresh sealant to protect them from stains and ingrained dirt for the long term. To do this, I used six coats of Tile Doctor Seal and Go, which works really well on Slate to provide a high-quality and highly aesthetic low-sheen finish.

Slate Conservatory Floor Before Cleaning Bicester

The customer was very pleased with the transformation – not least because it meant she could use the conservatory again!
 
 

Professional Restoration of a Dirty and Sticky Slate Tiled Conservatory in Bicester



Source link

Damaged Marble Bathroom Countertop Polished and Sealed in Northampton


Marble is known for its premium quality, toughness and aesthetic, making it a very popular choice for bathroom countertops, such as this one at a house in Northampton. However just because it’s tough doesn’t mean that Marble can be cleaned with the usual household cleaners. Like all natural stone, Marble is acid sensitive and unsuitable products can have a very damaging effect on its appearance.

In this situation, the property owner had used a limescale remover to remove some unsightly marks from the countertop. Unfortunately, the product was acid-based and instead of making an improvement it just made it worse and caused severe etching.

Black Marble Vanity Worktop Before Polishing in Northampton

The first photo above shows the limescale marks from where toiletries have been placed on the side whilst wet. Since Northampton is a hard water area, the limescale deposits over time caused these marks to appear.

Burnishing a Damaged Marble Bathroom Countertop

The only way to effectively remove the Limestone deposits – while at the same time rectifying the damaged caused by the botched cleaning attempt – was to use a system of hand-held diamond encrusted pads and hand help blocks of various grits to cut back the stone and re-polish it, a process we call burnishing.

Before officially beginning the burnishing process, I ran a few tests to determine the type of pad I would need to use to achieve the best results. I found that, in most areas, I would need to use the Tile Doctor 400 Grit (Coarse) pad to resurface the tile and remove the damaged layer of stone, but in some areas where the etching was worse, I would need to use the 200 Grit (Very Coarse) pad.

After burnishing the affected areas with the Coarse and Very Coarse grit pads, I started to incrementally polish the stone to achieve a high-quality shine, working my up through the Medium, Fine and Very grit pads.

Black Marble Vanity Worktop During Polishing in Northampton

No chemicals were used during this process – only water for lubrication, combined with the six-inch diamond encrusted burnishing pads fitted to a hand-held buffing machine.

Sealing a Marble Bathroom Countertop

The final part of the restoration was to seal the stone to maintain a long-lasting, deep polished appearance. To do this, I used Tile Doctor Shine Powder, which is a crystallising sealer in powder form. The powder is applied directly and combined with water, before being worked into the stone to seal it.

Black Marble Vanity Worktop After Polishing in Northampton

The customer was very happy with the results and the level of shine achieved. I gave the customer a complimentary bottle of Tile Doctor Stone Soap, which is our aftercare cleaner for polished natural stone, along with instructions on periodic maintenance to help maintain the finish we had achieved for as long as possible.
 
 

Removing Limescale Marks from a Polished Marble Countertop in Northamptonshire



Source link

Lacklustre Multi-Coloured Slate Tiled Floor Transformed in Datchworth


Slate is a very popular choice for floor tiles due to it being hard wearing with a relatively low porosity making it more stain resistant. Some property owners opt for darker Slate, while others prefer wonderful multi-coloured Slate, such as that used in this kitchen in Datchworth, a small village in between the towns of Herford, Stevenage and Welwyn Garden City.

Multi Coloured Sawn Slate Play Room Floor Datchworth Before Cleaning

What can be said for certain is that no-one likes a dull looking and dirty floor! Unfortunately, Slate tiles can easily lose their lustre if not treated to routine maintenance. This customer felt that her Slate tiles, which covered the kitchen, utility room and a child’s playroom, were well overdue a refresh. Here’s what we did.

Cleaning a Slate Tiled Kitchen and Utility Room

We followed our tried-and-tested process for restoring the natural lustre and appearance of Slate tiles.

To begin, we removed any old sealant on the tiles using Tile Doctor Remove & Go, which is both a coatings stripper and cleaning product. The product was applied liberally across the floor and worked into the tiles using a buffing machine fitted with a black buffing pad. Hand-held brushes were used to tackle the fine grout lines. This process removed old sealers and gave the tile and grout an initial clean.

Multi-Coloured Sawn Slate Kitchen Floor Datchworth Before Cleaning Multi-Coloured Sawn Slate Utility Floor Datchworth Before Cleaning

Next, we applied Tile Doctor Pro-Clean, which is our industrial strength tile and grout cleaner which was scrubbed into the Tile and Grout as before to remove remaining ingrained dirt. The resultant slurry was promptly removed using a wet vacuum.

To complete the cleaning process, we steam cleaned the Slate to remove any further residue trapped in the pores of the stone and any trace of cleaning product. The floor was then left to dry off overnight so it would be ready for sealing in the morning.

Sealing a Slate Tiled Kitchen and Utility Room

Upon returning to the property, we ran some quick damp tests, since even a small quantity of moisture can cloud the sealant and damage its performance. Thankfully, the tiles proved dry and we were able to seal the Slate using three applications of Tile Doctor Colour Grow.

This impregnating sealer helps to enrich the natural colours in the stone, while offering a natural-looking matte finish and robust protection. Between each application of sealant, we machine-buffed the surface of the floor to help dry the stone naturally while maintaining the matte finish.

Multi-Coloured Sawn Slate Kitchen Floor Datchworth After Cleaning Multi-Coloured Sawn Slate Utility Floor Datchworth After Cleaning

This two-day job was truly transformative for these Slate tiles. Just compare the before and after photos above – the customer was certainly very impressed with the speed and quality of the work. Another satisfied customer.

Multi Coloured Sawn Slate Play Room Floor Datchworth After Cleaning
 
 

Professional Renovation of a Dull and Lacklustre Multi-Coloured Slate Tiled Floor in Hertfordshire



Source link

Renovating an Original Edwardian Tiled Hallway to Peak Condition in Chippenham


Edwardian-style tiled floors are very much of a likeness with Victorian-style tiled floors, both typically being made of encaustic cement and styled in painted in geometric patterns. The main difference, of course, is that Edwardian tiles are a main feature of Edwardian-era houses (1901-1910), while Victorian tiles are found in slightly older properties.

As with many Victorian tiled floors, we’ve found that Edwardian tiled floors have commonly been hidden away for many years under carpet or some other form of covering. These hallway Edwardian tiles, at a property in Chippenham, had been covered by carpet for 30 years. Upon removing the carpet, we could see why – the hallway was covered in paint splashes, decades’ worth of dirt and, of course, adhesive stains from the underlay.

Edwardian Tiled Hallway Covered in Carpet and Before Restoration in Chippenham Edwardian Tiled Hallway Covered in Carpet and Before Restoration in Chippenham

My task was to restore the hallway floor back to its peak condition, when it was first installed over a century ago.

Edwardian Tiled Hallway UnCovered Before Restoration in Chippenham Edwardian Tiled Hallway UnCovered Before Restoration in Chippenham

Cleaning an Original Edwardian Tiled Hallway Floor

The first step of the restoration was to ensure the walls surrounding the hallway were protected. I did this by applying a protective film around the edges of the room. Next, I removed all the old carpet grippers and adhesive deposits manually using a handheld scraper.

Edwardian Tiled Hallway Prepared for Restoration in Chippenham

Tile Doctor Remove and Go was then applied to the floor to strip away any old sealant, which certainly by now was no longer effectual. This product also helped to break down the paint stains on the surface of the floor, though I also used a handheld scraper, as well as a rotary machine fitted with a black scrubbing pad, to speed up the process of removing both the sealant and the paint.

Edwardian Tiled Hallway During Restoration in Chippenham

To complete the cleaning process, I applied Tile Doctor Acid Gel, which is a blend of phosphoric and hydrochloric acids in a gel form, formulated to remove grout haze (grout smears) and treat efflorescence which is the formation of white salts on the surface of the tile.

Sealing an Original Edwardian Tiled Hallway Floor

I left the floor to dry completely overnight after installing air movers to assist with the process. These older properties do not typically have damp-proof membrane installed, which makes damp issues a real possibility. Upon returning to the property the following day, I ran some damp tests, and thankfully the tiles proved dry and ready to be resealed.

To do this, I used one coat of Tile Doctor Ultra-Seal, which is a penetrating sealer designed for maximum stain protection. I then also added four coats of Tile Doctor Seal and Go to provide the customer with the low-sheen, highly quality finish he desired.

He was so impressed with the outcome that he left the following glowing review on the Tile Doctor feedback system:

“Tile Doctor did an excellent job, starting from a very dirty and paint covered surface. The hallway floor now looks fantastic, just like it was a century ago. I’m pleased to recommend Cambridge Tile Doctor.”

Edwardian Tiled Hallway After Sealing in Chippenham
 
 

Professional Restoration of a Carpet Covered Original Edwardian Tiled Hallway in Cambridgeshire



Source link

Victorian Tiled Reception Area Renovated in South Molton Listed Building


I was approached by the owner of a listed Georgian Townhouse right in the middle of the small market town of South Moulton in North Devon who was struggling to have any impact on the appearance of his Victorian tiled reception area, despite hours of back-breaking scrubbing and had become disheartened by it.

Georgian Reception Floor Tiles Before Cleaning South Molton

Upon arrival a survey on the floor was conducted where I tested the moisture level of the tiles because floors of this age and construction didn’t have a Damp Proof Course and as such were just tiled onto whatever subsurface was already there, which quite often contained rubble and other guiding materials such as lime from the construction of neighbouring properties!

Georgian Reception Floor Tiles Before Cleaning South Molton

Whilst talking to the customer he mentioned that he had some old quarry tiles in his kitchen that he also wanted cleaning, however I’ll cover that in another post. To continue I produced a quote for the work which was accepted and a date was agreed for me to return with all the equipment and products required.

Cleaning Victorian Tiled Reception Area

To clean the Victorian tiles in the reception area I applied a medium dilution of Tile Doctor Pro-Clean and left it to soak in for ten minutes. I then set about scrubbing the solution into the tiles using a series of Diamond impregnated burnishing pads ranging from 100-400 grit.

Once the whole floor had been treated in this manner it was thoroughly rinsed with water using a wet and dry vacuum to extract the now soiled cleaning solution and I was able to see that the process had really brought the tiles up a treat.

Concerned about the damp readings I had experienced earlier I decided it would be prudent to give the floor an Acid Rinse with Grout Clean-up to counteract any potential salt issues (efflorescence) that can be a real problem on these old floors which have no Damp Proof Course. I highly recommend this step on old floors as salts can over time permeate through the tiles and the cleaning process draws them to the surface. Left unaddressed the salts can damage the sealer and leave the floor looking far from its best.

Once the tiles had been cleaned, I rinsed the entire floor thoroughly using fresh water to remove any trace of cleaning products, before leaving it to dry off completely overnight.

Sealing an Original Victorian Tiled Hallway and Entrance Lobby

The following day I returned and after rechecking the moisture levels to ensure that they had adequately dried out I started to seal the Victorian tiles in the reception area. To improve colour, I first applied a coat of Tile Doctor’s Colour Grow, a solvent based impregnating sealer which picks out and enhances the natural colour of the tiles, not only bringing the whole floor to life but helping to disguise any damage the floor has suffered over the years. After this coat had dried sufficiency four coats of Seal and Go were applied to finish off the floor and give it that ‘wow factor’.

Georgian Reception Floor Tiles After Cleaning South Molton Georgian Reception Floor Tiles After Cleaning South Molton

The customer was thrilled and left the following feedback on the Tile Doctor feedback system:

“The work was carried out in a professional manner, with excellent results.”

For aftercare I left the customer with some guidance on care and maintenance of the floor as well as a suitable bottle of tile cleaner.
 
 

Professional Renovation of a Victorian Tiled Reception Floor in Devon



Source link

Stone Effect Pre-Cast Concrete Kitchen Flooring Deep Cleaned in Arnside


The stone floor in these pictures are in fact pre-cast concrete tiles created to emulate Limestone flagstones laid in a Kitchen in Arnside. You can’t beat the natural beauty of Limestone but these concrete tiles do give the Kitchen that rustic look the customer sought. The odd thing is, it’s actually less expensive to buy real Limestone these days as Pre-cast concrete is not a cheap product.

Stone Effect Concrete Kitchen Flooring Before Cleaning Arnside Stone Effect Concrete Kitchen Flooring Before Cleaning Arnside

Unfortunately, in this case, the concrete had been smeared with Ivory Grout during installation and the tiler had failed to remove it after grouting and this had dulled the look of the tile. The customer was led to believe by the Tiler that the off-white colour was indeed part of the stone and had put up with it for several years before we were called out.

Cleaning a Damaged Flagstone Tiled Floor

First of all we conducted a test clean to make sure our usual cleaning system would work as well on pre-cast concrete. I was aware that this type of product has a colour dye added to it which does seem to lose colour over the years and also can lose quite a bit of this dye once we start cleaning with strong chemical’s. Not wanting to risk any depreciation in the colouring I opted instead for the application of a set of Tile Doctor Burnishing pads. The pads are encrusted with industrial Diamonds and come in different grits from coarse to fine and I found that not only did the process remove a lot of the of White grout haze left by the tiler but also gave us a good start to the cleaning process without losing any more of the colour Dye.

The customer has specified they were keen for the floor to have more of a sheen finish, so we finished the cleaning with the rest of the Diamond pads finally ending on the super fine pad. We had to do some edging work where the circular pads could not reach but apart from that the pre-cast concrete responded well to this treatment as you will see on the before and after pictures.

Sealing a Flagstone Tiled Floor

The next day we called back to seal the Kitchen floor to protect it from staining, something that is more than likely in a Kitchen. For this we used a couple of coats of Tile Doctor Colour Grow which not only protects by soaking into the pores of the tile but also restores a lot of the colour that had previously been lost.

Stone Effect Concrete Kitchen Flooring Before Cleaning Arnside Stone Effect Concrete Kitchen Flooring Before Cleaning Arnside

For aftercare I explained to the customer that sealers do wear off over time and so to get maximum life out of the sealer they should clean the floor with a pH Neutral Cleaner like Tile Doctor Neutral cleaner. It’s designed for cleaning sealed tiled floors and it won’t affect the colour dye or the Sealer we have applied unlike stronger products will eat away at the sealer over time. Additionally, pre-cast concrete like Limestone is Acid Sensitive and as such products like certain types of the Cillit-Bang range cannot be used on a floor like this as it will cause surface damage.
 
 

Restoration of a Damaged Flagstone Tiled Floor in South Cumbria



Source link

Edwardian Clay Tile Front Pathway in Barnet


As you can see this Clay Tiled Pathway laid during the Edwardian period at the front of a house in Barnet, North London had suffered over the years and now had many broken and cracked tiles along the path. The concrete foundation had seen some movement in the past leading to a crack forming right across which had either cracked the tile or caused them to become loose.

Edwardian Clay Pathway Barnet Before Cleaning Edwardian Clay Pathway Barnet Before Cleaning

To restore the path to its original condition would require removing all the broken and loose tiles and then relaying with matching replacements and grout giving particular attention to the detailed edging pattern. Fortunately, having done a few of these jobs before I have learned where to find replacements and often keep an eye on salvage yards and ebay.

Edwardian Clay Pathway Barnet Before Cleaning Edwardian Clay Pathway Barnet Before Cleaning

Cleaning and Repairing an Edwardian Clay Tiled Pathway

The first job was to remove ingrained dirt and old coatings by applying a strong dilution of Tile Doctor Remove & Go across the entire length of the pathway. Remove and Go as its name suggests breaks down and strips off the old sealers as well as dislodging ingrained dirt. It was scrubbed in and then rinsed off with water and extracted using a wet vacuum.

Next some of the tiles which had experienced particularly stubborn staining were given an Acid Wash using Tile Doctor Acid Gel which removes old grout smears and mineral salts deposits which is often referred to as efflorescence. Acid Gel neutralises the alkaline salts and once scrubbed in it was removed using the wet vacuum.

Once the dirt and efflorescence had been dealt with, I focused my attention towards the tile repairs starting with the removal of the broken and loose tiles so I could get at the cracked sub-base and repair it. Once the repair had hardened I was able to relay the path using a mixture of exiting and replacement tiles taking care to match the original pattern. Before leaving for the day the tile adhesive had gone off and I was able to grout them in using a matching grout. I had also checked the weather forecast to ensure no rain was forecast that evening.

Sealing an Edwardian Clay Tiled Pathway

The weather held and the following day with a freshly cleaned and repaired path I was able to finish the job by applying two coats of Tile Doctor Colour Grow which really brings out the natural colours in the clay tile. Once the sealer had dried I ran a white buffing pad over the path to give it that final finish before showing it to the owner of the property who I’m happy to report was extremely pleased with the result.

Edwardian Clay Pathway Barnet After Cleaning

I should mention that when choosing a Sealer for an external application it’s important to choose one which is fully breathable and can cope with the wet conditions.
 
 

Victorian Tiled Pathway and Edwardian Tiled Hallway Restored in Palmers Green



Source link

Porcelain Shower Cubicle Tiles Expertly Refreshed in Edinburgh


Porcelain is a popular choice for tiles in modern homes due to its superior durability. It also makes a particularly suitable material for shower tiles because of its natural water resistance. Nonetheless, Porcelain tiles – just like any other type of tile – still require routine cleaning and maintenance to stay looking fresh and attractive.

This is especially the case for shower tiles, as they are subject to mould and scum caused by exposure to the dyes in shampoos and soaps etc which as well as staining the tiles can have a dramatic effect on the grout. Below is a photo of a Porcelain shower cubicle I was asked to restore in Edinburgh. The process for restoring these types of tiles is relatively quick and easy, providing you use the right products and methods. Here’s how I did it.

Shower Grout Before Restoration in Edinburgh

Cleaning and Sealing Porcelain Shower Cubicle Tiles

To begin refreshing this cubicle, I gave the whole area – paying particular attention to the grout lines – a scrub down using Tile Doctor Duo Clean. Duo Clean is our product of choice for the removal of the common mould and soap scum that builds up on cubicles like this one.

Next, I rinsed down the area with fresh water to remove any trace of cleaning product and then left it to dry for a short period of time. It’s difficult to get the grout lines perfectly clean, especially after years of neglect, but we can resolve the situation by simply recolouring the grout.

Shower Grout During Restoration in Edinburgh

I this case I felt the grout although cleaner from when I started did need more work so I decided to go ahead and apply a Grout Colourant. Tile Doctor has a range of Grout Colourants available in ten colours so I painted on three coats of the white colourant which really improved the look of the grout leaving it clean and fresh. Another advantage is the colourant acts as a barrier on top of the grout sealing the grout joint and protecting them from further staining. Other popular colours available in the range include Black, Cappuccino, and three shades of Grey.

Finally, I ripped and out and replaced the mouldy silicone around the base of the shower cubicle and replaced it with fresh.

Shower Grout After Restoration in Edinburgh

The client was very impressed with the speedy restoration. Before leaving the property, I explained that rinsing down the shower cubicle with fresh water after every use can help to reduce the effect of staining and leaving the door and window open after a shower improved ventilation and inhibit the growth of mould. Naturally you can always give me call if the situation gets out of hand.
 
 

Professional Tile Cleaning, Grout Recolouring and Sealing for a Mouldy Porcelain Shower Cubicle Restoration in Edinburgh



Source link

Original Victorian Tiles Refreshed With Deep Clean and Seal in Edinburgh


Edinburgh became an increasingly important city in the UK during the Victorian period. Although overtaken by Glasgow as Scotland’s largest city in the early 19th century, Edinburgh experienced expansion and industrialisation, and many areas which had been populated by Georgian architecture were rebuilt with Victorian buildings.

Of course, this included many Victorian residential properties, many of which are still inhabited, and still have original Victorian tiled flooring. A lot of property owners choose to keep the original tiles rather than strip them out, and we specialise in restoring and maintaining them.

I recently visited a property in Edinburgh to provide a deep clean and fresh seal for some Victorian porch tiles that were looking a bit worse for wear. The job was carried out over the space of two days.

Victorian Porch Entrance Before Cleaning Edinburgh

Cleaning Original Victorian Tiles

On the first day of work, I arrived at the property and immediately began by stripping the floor of any old sealant. Sealers don’t last forever and are worn away over time requiring them to be routinely topped up with a fresh application, however in this case the sealer had worn off completely in most places allowing dirt to become ingrained in the pores of the tile, so the only course of action would be to strip off what was left, clean the floor and reseal.

The old sealant was removed using a strong solution of our natural stone cleaner and stripper, known as Tile Doctor Pro-Clean, and our heavy-duty sealer and coating remover, known as Tile Doctor Remove and Go. This combination of products was applied and scrubbed into the stone using a black buffing pad fitted to a rotary machine. The floor was then rinsed to remove any excess chemical residue and the moisture was soaked up.

Next, the floor was then burnished using a coarse diamond-encrusted burnishing pad to grind off tough stains and rinsed again with fresh water. Tile Doctor Neutral Tile Cleaner, which is an excellent pH-neutral cleaner for routine maintenance, was then used to complete the cleaning process and the tiles were left to dry completely overnight.

Sealing Original Victorian Tiles

On the second day of work, the tiles had dried off nicely overnight and I was able to return to the property to seal the tiles using five coats of Tile Doctor Seal and Go. This is a topical sealer which provides a high-quality low-sheen finish and protection against ingrained dirt and stains. In this case, the customer had opted for a sheen finish as opposed to a natural-look, matte finish.

Comparing the before and after photos, it’s clear how significant a difference routine maintenance can make to the appearance and condition of these original Victorian tiles. The customer was very pleased with the outcome and I recommended the use of our Neutral Tile Cleaner for frequent cleaning in the future. Being PH neutral it won’t prematurely erode the sealer like many acidic supermarket products.

Victorian Porch Entrance After Cleaning Edinburgh
 
 

Professional Tile Cleaning and Sealing for an Original Victorian Tiled Floor in Edinburgh



Source link

Renovating a Victorian Tiled Hallway in Grappenhall near Warrington


The village of Grappenhall has a long history that goes all the way back to the bronze age and as a result has all periods of architecture including quite a lot of houses with Victorian tiled hallways . This particular floor at a house in the village had been well looked after well by the owner but had now lost its vibrancy, was looking dull and now needed a deep clean and reseal.

Victorian tiles are porous and so need to be sealed to protect them from dirt becoming ingrained in the floor. However, hallway floors get a lot of foot traffic which over time wears down the sealer until it becomes so thin and patchy it’s no longer effective. As a result, you need to regularly top up the sealer or every three to four years it will need to be stripped off and reapplied.

Victorian Tiled Hallway Grapenhall Before Cleaning Victorian Tiled Hallway Grapenhall Before Cleaning

Deep Cleaning the Victorian Tiled Floor

I used clear plastic to protect the wood skirting boards from splashing and then gave the tiles a good scrub with a mixture of Tile Doctor Pro-Clean and Remove and Go to deep clean and strip off any remaining sealers. The cleaning solution was left to soak in for ten minutes before scrubbing it in with a black pad fitted to a heavy buffing machine.

Once the whole area had been scrubbed I rinsed off with water which was then extracted using a wet vacuum. With the floor now clear I was able to inspect it to ensure all the previous sealer and ingrained dirt had been removed. Any areas with stubborn stains were spot treated by reapplying the cleaning concoction I used earlier before leaving the floor to dry off fully overnight.

Sealing the Victorian Tiled Floor

When I returned the next morning my first job was to test the tiles for damp using a damp meter. This is important as damp tiles won’t take the sealer as well as dry tiles, however this time everything was fine.

I then proceeded to seal the Victorian tiles with a single coat of Tile Doctor Colour Grow to enhance the natural colours in the tile before applying a further seven coats of Tile Doctor Seal and Go which leaves a sheen finish and is ideal for Victorian tiles.

Victorian Tiled Hallway Grapenhall After Cleaning Victorian Tiled Hallway Grapenhall After Cleaning

The hallway now looks fantastic and vibrant and then new sealer will protect them from ingrained dirt making them easier to clean and keep them looking good for some time to come.
 
 

Restoring Victorian Hallway Floor Tiles in Cheshire



Source link

Original Victorian Tiled Hallway Repaired, Cleaned and Sealed in Cheltenham


Cheltenham in the county of in Gloucestershire is a recognised area of outstanding beauty, and is known for its various festivals which take place throughout the year. Horse racing is another event that continues to be very popular in Cheltenham, after first gaining popularity during the Victorian period.

Indeed, lots of people made their homes in the town during this time, and many of the original Victorian properties are still in use to today, complete with original Victorian tiled floors. However, not all of these floors have been kept in great condition over the decades. Lots of them have spent years covered by carpet, while others have become broken or damaged, and simply left to slowly degrade over time.

I found a good example of this at the home of a recent customer of mine. The customer’s Victorian tiled hallway was in poor condition, with some of the tiles around the doorway cracked and in need of replacements. All in all, the floor required repairs, followed by deep clean and a fresh application of sealant.

Victorian Tiles Before Repair Clean and Seal Cheltenham Victorian Tiles Before Repair Clean and Seal Cheltenham

Repairing and Cleaning Original Victorian Tiles

My first job was to source suitable replacement tiles which would be needed to match with the original pattern of the floor. Fortunately Tile Doctor has built up a network of contacts in this area so this proved to be a simple enough task.

When I arrived on site I protected the flooring in the adjacent rooms and staircase carpet with plastic sheeting and made a start on removing the cracked tiles, cleaning up the foundation then fixing and grouting in the replacement tiles.

Victorian Tiles During Repair Cheltenham

Next, I moved on to cleaning the entire hallway starting with an application of Tile Doctor Pro-Clean, an alkaline-based product that is safe to use on Tile and Stone including Victorian tile, for the removal of heavy soil and staining. It can strip away old sealants remaining on the tile which is important to avoid a patchy looking result. The product was diluted with water and applied liberally across the area and left to dwell for roughly 10 minutes before I proceeded to work it into the tiles using a scrubbing pad fitted to a rotary machine.

I used a wet vacuum to remove the soiled cleaning solution, rinsed with water and then spot treated those tiles which needed more work to get them clean.

Once I was happy with the floor was as clean as it could be I left it to dry off overnight.

Sealing Original Victorian Tiles

Upon returning to the property the next day, my first concern was to run some tests to check for any outstanding damp issues. Victorian properties do not typically have damp proof membranes installed, so these tests were essential as an excess of moisture can cloud the sealant and prevent it from performing correctly.

Luckily, there were no major damp issues and I could proceed with sealing the tiles using Tile Doctor Colour Grow, which is an impregnating sealant that penetrates into the pores of the tile enhancing the natural colours and protecting it from with. I find many customers with Victorian Tiles opt for Colour Grow as their sealant because it provides a natural-look matte finish which really compliments the classic characteristics of Victorian tiles.

The customer was absolutely delighted with the outcome of the restoration, which you can see in the photo below. Best of all, he said that he is already getting comments from friends and family on how great the floor looks now.

Victorian Tiles After Repair Clean and Seal Cheltenham Victorian Tiles After Repair Clean and Seal Cheltenham

 
 

Professional Renovation of an Original Victorian Tiled Hallway in Gloucestershire



Source link

Refreshing Dull Slate Kitchen Floor Tiles in Ticknall


This post comes from a lovely house in Ticknall, Derbyshire where the owner had installed a Welsh Slate Tiled Floor in their Kitchen ten years earlier. Welsh Slate is renowned the world over for its quality however ten years of use in a high traffic does take its toll and the customer complained that she wanted the tiles to look colourful with a matt finish but they always looked dull and dirty even after cleaning with mop.

Welsh Slate Kitchen Floor Tiles Before Cleaning Ticknall Derby

Interested to know the history of the floor I asked when it was last sealed and apparently it had not been redone since it was installed. It was clear to me that any sealer had long since long worn off and now dirt was becoming trapped in the pores of the stone making it difficult to clean effectively.

Cleaning a Dirty Slate Tiled Floor

To get the Slate clean I applied a strong dilution of Tile Doctor Pro-Clean which as well as cleaning deep into the pores of the tile should also deal with any remaining sealer. I left it to soak into the tile for about ten minutes before working it in with a black scrubbing pad fitted to a rotary buffer machine. After this I rinsed the floor with water and extracted the now soiled cleaning solution with a wet vacuum.

At this point it became apparent there were some stubborn stains in front of the oven that needed dealing with so I scrubbed in a solution of Tile Doctor Grout Clean-Up which is an acid based product that is great for removing mineral deposits such as salts as well as grout smears. This worked well and the floor was now in ready for sealing so I gave the floor a good rinse to remove any trace of product and left it to dry.

Sealing a Slate Tiled Floor

The floor was about 7 square meters in size and being relatively modern it had a Damp Proof Membrane and Underfloor Heating installed, as a result it was fully dry within three hours and ready to take a sealer.

With the floor now dry I started applying the sealer which in this case was Tile Doctor Colour Grow. Colour Grow is an impregnating sealer that penetrates deep into the pores of the stone, thus acting as a shield against ingrained dirt whilst enhancing the natural colour of the tiles to provide an aesthetically appealing appearance. You may recall the owner had requested a matt finish so after applying a couple of coats the job was done.

Welsh Slate Kitchen Floor Tiles Part Sealed Ticknall Derby

With the tiles clean and now protected with the colour enhancing matt sealer I asked the customer to inspect the floor. As you can imagine she was very pleased with the result and left the following comment on the Tile Doctor feedback system.

“Mr Mall was a very efficient, hardworking and helpful worker. The end result was excellent and I am delighted with the outcome. Highly recommend…”

Welsh Slate Kitchen Floor Tiles After Cleaning and Sealing Ticknall Derby
 
 

Professional Deep Cleaning of a Stained Slate Kitchen Floor in Derbyshire



Source link

Restoration of a Quarry Tiled Floor Ruined with Cement in Swansea


The owner of this Quarry tiles floor at a house in Swansea had expended much effort in its restoration and feeling exhausted decided to call in their local Tile Doctor to finish it off.

Quarry Tiles in Swansea Covered in Cement Compound Quarry Tiles in Swansea Covered in Cement Compound

I never saw the original flooring but I could see it had been covered by some sort of cement screed which had probably been used, judging by the imprints, to support large carpet tiles. I’ve come across a few floors like this, you can’t simply put carpet over a tiled surface as tiles can be slightly convex in shape and the grout lines result in dips forming in the carpet so as a result a floor levelling compound is usually applied beforehand.

After doing a cleaning sample and a test to see how stubborn the cement compound was to remove I agreed with the customer that it was possible and showing her the test results, she was happy to proceed with the work.

Quarry Tiles in Swansea Covered in Cement Compound Showing Test Clean

Removing Cement from a Quarry Tiled Floor

Before starting I took a few moisture readings with a handheld damp meter, I always recommend doing this at the start as it gives you a baseline reading that can be used to determine the floor has dried and ready for sealing later. Most old floors don’t have a damp proof membrane installed and so if the moisture readings were high I would recommend coming back to seal the floor at a warmer part of the year.

The first step was to remove all the cement compound from the surface of the tiles and then scrape as much paint and plaster off the tiles before cleaning with an undiluted mixture of Tile Doctor Pro-Clean and Remove and Go. This combination of two different products make a great team; Pro-Clean is a versatile, high alkaline cleaner that is used to deal with reasonably heavy soil build-up on natural stone and Tile. Remove and Go, also safe to use on natural stone and tile is specially formulated to remove old coatings including paint and old sealers.

Quarry Tiles in Swansea Removing Cement Compound

This solution was applied to the floor and, working in small sections, I scrubbed it into the tiles using a rotating scrubbing machine fitted with a nylon brush attachment; it was also scrubbed into the grout using a stiff brush. The floor was then rinsed, and the resulting cleaning slurry was vacuumed away using a wet-vax machine.

The final stage of the cleaning process was to run over the tiles with a coarse 200 grit diamond pad together with Grout Clean-up which is another Tile Doctor product that removes mineral deposits such as old grout and cement smears. After a final rinse I could see the all the cement had been removed and the Quarry tiles were looking much healthier and ready for sealing.

Quarry Tiles in Swansea With Cement Compound Removed

Sealing a Quarry Tiled Floor

I left the floor to dry out overnight with the aid of heater fans and all doors closed to keep it warm. When I returned the next day, I retested the floor for moisture and compared the initial readings to confirm the floor was ready for sealing.

The Quarry tiles were quite porous so to seal the Quarry tiles, I eventually used eight coats of Tile Doctor Seal & Go which not only provides a protective covering but also enhances the colours of tiles especially old red quarry floor tiles.

Quarry Tiles in Swansea After Restoration

The customer was thrilled with the results of the floor and was so impressed told me she was going to recommend Tile Doctor to her friends.
 
 

Professional Restoration of a Cement Covered Quarry Tiled Floor in South Wales



Source link

Terracotta Kitchen Tiles Given New Lease of Life in Kingston Upon Thames


It’s very surprising how often I hear from home owners who are considering completely replacing tiled floors that can be easily be salvaged. While some people might believe that replacement is cheaper and quicker than cleaning, this is emphatically not true in most situations.

Thankfully, one of my recent customers, who lives in Kingston Upon Thames had been persuaded by her husband not to completely strip out the original Terracotta tiles in their kitchen. While the couple had just had new kitchen units installed, it seemed unnecessary to completely replace the Terracotta floor tiles even though they certainly needed a deep clean.

Terracotta Floor Tiles Before Cleaning Kingston on Thames

Instead, they contacted their local Tile Doctor to rejuvenated the tiles to complement the new kitchen design.

Cleaning Original Terracotta Kitchen Tiles

Before beginning, I covered all the new kitchen units with protective sheeting to prevent them from encountering water and splashes from the cleaning products. I could see that the tiles had been left unsealed for many years and this had allowed dirt and general muck to become deeply ingrained.

To clean the tiles, I applied a covering of our strong alkaline-based cleaner, known as Tile Doctor Pro-Clean, and left it dwell for a short period. I then attached a coarse, 200-grit diamond encrusted burnishing pad to my buffing machine and began working the product into the tiles. The burnishing pad milled away the dirty top layer of the tiles. Contrary to what some might believe, this doesn’t harm the tiles in any way, but instead polishes them.

Any old sealer and dirt that the buffing machine could not reach in the corners of the room was removed by hand using diamond encrusted burnishing blocks. The burnishing process does, in fact, make quite a mess, so I promptly rinsed off the resulting slurry with more water and a wet vacuum to clear the area and leave it clean and ready to be dried.

Sealing Original Terracotta Kitchen Tiles

A lot of water was used during the cleaning process, so I had to leave the property for 48 hours to let the tiles dry completely. Returning to the property after those two days, I sealed the tiles using six coats of Tile Doctor Seal and Go. Following years of next to no protection, the floor desperately needed an effective sealer to put new life in the Terracotta and Seal and Go does that in spades by adding a lovely sheen to the tile.

Terracotta Floor Tiles After Cleaning Kingston on Thames

The photo above shows the amazing difference made by cleaning the floor instead of choosing to replace. The customer’s testimonial speaks for itself:

“Excellent service and we are delighted with the work. Would definitely use Rupert again.”
 
 

Professional Tile Cleaning and Sealing for a Terracotta Tiled Kitchen in Surrey



Source link