Cleaning Student Shower Cubicle Tile and Grout at Oldham University


Earlier in the year we were contacted by the facilities manager of one of the student apartment blocks in Oldham which provides accommodation for the students of Oldham University. They were looking for a firm to revamp the student en-suite bathrooms during the summer recess. The building has 270 apartments and we had been asked to quote for the renewal of the ceramic tile and grout of around 45 shower cubicles (possibly more) which were judged to be in a bad state and beyond the ability of their in-house cleaning team.

The University runs degree courses from Accounting to Sports Coaching and as you can image Students are not known for their cleanliness so we knew we would have our work cut out completing the assignment on time.

Several companies competing for the work however after successfully demonstrating what we can do with a patch test in one of the bathrooms and comparing of quotes I’m pleased to say the facilities company awarded us the contract!

Student Shower Cubicle Before Cleaning in Oldham

Tile and Grout Cleaning

We returned in the summer and facing a time limit to complete the work we worked out a system whereby we would spray the Tile and Grout down with Tile Doctor Duo-Clean, let it soak in for about ten minutes and then scrubbed it in by hand with a stiff brush. Duo Clean is an effective double action grout cleaner and mould remover that can remove mould and blackspot from grout and silicone. It’s really useful for cleaning shower tiles as the spay attachment mixes the product with air as its spayed onto the surface allowing it to stick to vertical surfaces more easily. Once the tile and grout was clean it was rinsed off with water and stubborn areas re-treated until clean.

Duo Clean is effective at dealing with Mould on Silicone in most situations however some of the silicon sealant was beyond cleaning so in these cases the old Silicone was stripped out and replaced with new.

We were able to clean all the shower tile and grout using this process however I had brought a long a few Grout Colouring kits as a back-up solution just in case. Once the grout is clean the colourant is painted on using a small brush and makes a huge difference to the look of a shower. There also inexpensive and provide a barrier over the grout so it keeps its appearance for longer.

There were a lot of bathrooms to cover so once the cubicle was spotless we immediately moved onto the next one completing the whole project three days ahead of the due date.

Student Shower Cubicle After Cleaning in Oldham

The facilities manager was delighted with results and timing of our work and it just goes to show that using the right cleaning products can save you time and money compared to the alternative of re-grouting.
 
 

Commercial Shower Cubicle Cleaning at Oldham Student Accommodation



Source link

Bleach-Damaged Slate Poolhouse Tiles Restored in Oundle


This very nice house in a village near Oundle in Northamptonshire features something we don’t see too often in residential property – an indoor swimming pool. The pool is surrounded by some very complementary and rustic looking Slate tiles which act as the flooring in the poolhouse.

Slate Tiled Pool Surround Oundle Village Before Cleaning

However, over the years, the Slate tiles had been badly damaged by the chlorine bleach which is used to sterilise the pool water. The cumulative effect of people splashing water onto the tiles or walking around wet on the floor had caused the sealant to break down and the bleach had left a white blotchiness on the stone. I was asked to rectify the situation by deep cleaning the tiles, resurfacing some of the damaged stone, and applying a fresh sealant.

Slate Tiled Pool Surround Oundle Village Before Cleaning

Cleaning Bleach-Damaged Slate Tiles

My first course of action in restoring these tiles was to clean the entire floor using Tile Doctor Pro-Clean, which is a strong alkaline-based cleaner for most types of natural stone. This product was scrubbed into the tiles using a stiff brush fitted to a rotary machine. After cleaning, I rinsed the floor with fresh water and used a wet vacuum to soak up the resulting slurry. Although the pool was protected with a cover I had to take care not to allow any of my cleaning water to contaminate the pool.

Slate Tiled Pool Surround Oundle Village During Cleaning

The process was effective in removing most of the white calcium deposits caused by the bleach, but not all of them. I tackled the more embedded stains with Tile Doctor Acid Gel, which is a blend of phosphoric and hydrochloric acids which treats stubborn smears such as these. The gel was brushed onto the tiles and left to dwell for 15 minutes, and then agitated using a black stripping pad fitted to a rotary machine.

After rinsing the floor again, I found that there were yet still stubborn stains remaining that didn’t respond to chemical cleaning. I decided that removing these would necessitate a more aggressive approach, and so used a set of diamond-encrusted burnishing pads to literally remove the damaged layer of stone and resurface the face of some of the badly damaged tiles.

Slate Tiled Pool Surround Oundle Village During Cleaning Slate Tiled Pool Surround Oundle Village During Cleaning

Sealing Slate Tiles

The tiles were left to dry overnight after being cleaned and repaired. The next day, I returned to the property to applying the fresh sealant. For this I used Tile Doctor Colour Grow, a sealant which impregnates the stone to provide maximum protection and enhances its natural colours.

Slate Tiled Pool Surround Oundle Village After Cleaning

The customer was very impressed with the result and was very much keen to make sure the tiles remained in such good condition, so I made sure to provide the groundsman with instructions on routine maintenance.

Slate Tiled Pool Surround Oundle Village After Cleaning

I informed him that each time the pool is used the entire area needs to be hosed and brushed down as no sealer can withstand continuous exposure to chlorine bleach. I also left a complementary tin of Colour Grow sealant with him for periodic top-ups, as well as information on the yearly maintenance plan we offer at Tile Doctor.
 
 

Professional Removal of Calcium Deposits from Slate Pool House Tiles in Northamptonshire



Source link

Dirty and Stained Marble Kitchen Tiles Rejuvenated in St Neots


St Neots is the largest town in Cambridgeshire, with a population of approximately 40,000 (Cambridge is after all a city). This is unsurprising, since the town has a long and rich history. In fact, archaeological evidence indicates that the area was home to settlements as early as the prehistoric Mesolithic period.

I was recently called out to a property in the area – which itself was relatively old – to see what could be done to restore the condition and appearance of a Marble tiled kitchen floor, stylised in a small and uniform square pattern. It appeared to me that the tiles had been installed for a long time – perhaps even laid down in the original construction of the property – and, in any case, had suffered many years’ worth of neglect.

The result? A very dirty and unappealing appearance and a very unhappy owner.

Marble Tiled Kitchen Floor Before Cleaning St Neots Marble Tiled Kitchen Floor Before Cleaning St Neots

Cleaning a Dirty Marble Tiled Kitchen Floor

Before beginning the restoration of the floor, I covered up the walls and kitchen units to protect from exposure to any of the cleaning products I would be using. I then started by cleaning the floor with Tile Doctor Remove and Go, which is a multi-purpose product. Remove and Go both cleans the stone and strips away any old sealer.

However, there were several areas of the floor which were affected by more deeply ingrained dirt and stains. To remove these, I needed to use a process which we call burnishing. This involves the application of diamond encrusted burnishing pads to grind away the damage layer of stone. I then used a truck-mounted pressure washing system to rinse the floor and remove all the excess slurry and chemicals.

Sealing a Marble Tiled Kitchen Floor

While burnishing can be used to achieve a high quality polished finish on stone such as Marble, Limestone and Travertine, the customer decided instead to have a more natural look for the floor.

Therefore, to seal the freshly cleaned Marble tiles, I applied two coats of Tile Doctor Colour Grow, which is an impregnating sealer that offers maximum protection and a matte finish that matches nicely with the rustic characteristics of the floor. As an impregnating sealer, Colour Grow penetrate deep into the pores of the stone to fill them and prevent dirt from becoming ingrained in the future.

Marble Tiled Kitchen Floor After Cleaning St Neots Marble Tiled Kitchen Floor After Cleaning St Neots

The customer was amazed by the difference made to the condition and appearance of the floor, so much so that he has queried about getting more areas of the property cleaned in the future. Another satisfied customer.
 
 

Professional Tile Cleaning and Sealing for a Dirty and Stained Marble Kitchen Tiled Floor Restoration in St Neots



Source link

Marble tiled vestibule cleaned and polished in Edinburgh


I was asked to take a look at this small but beautiful Marble tiled vestibule at the entrance to a lovely house in Edinburgh. As you can see from the photograph below the colours in the Marble were looking washed out and the overall appearance was dull and lifeless. As the main entrance it must have seen a lot of foot traffic and a fair amount of wear and abuse over the years.

Polished Marble Vestibule Before Cleaning Edinburgh

Cleaning and Polishing Marble Tiles

The first task was to brush and vacuum the floor to remove debris and grit. After this the floor was sprayed with a dilution of Tile Doctor Pro-Clean a tile cleaner that is safe to use on stone floors and scrubbed in with a black buffing pad fitted to a rotary machine. This released a lot of dirt from the tile and the soiled cleaning solution was then rinsed off with water and extracted using a wet vacuum.

Once the floor had all the surface dirt removed we then proceeded to polish the marble with a set of diamond burnishing pads which restore the shine the stone. The burnishing pads come in a set of four and you start with a coarse pad with a little water and work your way through the set moving from a the coarse pads through to the finer pads; this process polishes the stone more and more until you get a smooth finish. After each pad was used the area was thoroughly rinsed with clean water to remove any slurry kicked up by the process before moving onto the next. Once we had gone through all four pads the floor was left clean, smooth and shiny.

Sealing Marble Tiles

Being a high traffic area I wanted to leave a very durable polish that would last for years to come, so once the burnishing process was completed we proceeded to seal and further polish the Marble by buffing the floor with Tile Doctor Shine Powder. The crystallising powder provides a very high shine and a tough durable finish, ideal for this situation.

Polished Marble Vestibule After Cleaning Edinburgh

I think you will agree we have managed to put the life back into the floor which is especially important in hallway’s and entrances like this as they are the first thing you see when you come into the property.
 
 

Marble Tiled Entrance Restored in Edinburgh



Source link

External Terrazzo Tile Steps Refinished in Glasgow


The photographs below are from a set of Terrazzo steps outside a house in Glasgow which had completely lost their colour after being subject to years of weather staining and believe me we see all sorts of weather up here in Scotland. The owner of the house wanted them restoring back to their natural state but naturally concerned about safety didn’t want them shiny or slippy in anyway.

Terrazzo Steps Before Cleaning and Sealing in Glasgow

Cleaning Terrazzo Steps

I could see tackling the different surfaces of the stone stairs would be tricky so rather than opt for a cleaning product I decided to use a set of diamond encrusted burnishing pad fitted to a handheld flex machine.

I started with the very coarse 50 grit pad lubricating along the way with a little water and moved up through the medium and fine pad until the job was finished. Now normally when working on stone this is followed up with the application of a very fine pad to restore a polished appearance but clearly in this case that would not be necessary. In between the application of each pad the steps were rinsed with water to remove the slurry generated in the burnishing process.

One complete I left them to dry out for a few days; fortunately I had timed my visit within a warm weather window so I was confident they should be dry when I returned.

Sealing Terrazzo Steps

I returned a few days later and after checking the stone had indeed dried out I sealed the Terrazzo with three coats of Tile Doctor Colour Grow which is a breathable impregnating sealer suitable for external application. Being an impregnator it protects the stone from within by occupying the pores in the stone where dirt might otherwise become ingrained, it also enhances the natural colours in the stone and as you can see from the photograph below the steps now look much pinker.

Terrazzo Steps After Cleaning and Sealing in Glasgow
 
 

Terrazzo Tile Steps and Grout Refreshed in Glasgow near Edinburgh Airport



Source link

Ceramic Kitchen Floor Tiles and Terracotta Window Sills Restored in Sherburn-in-Elmet


At Tile Doctor, we have completed a wide variety of restoration jobs, from very large floors in hotels and restaurants to smaller floors in kitchens and bathrooms. We also often work on different surface types, including shower cubicles and stone or tiled window sills. I recently visited the small village of Sherburn-in-Elmet in Leeds to complete two small, but very different, jobs for a customer.

The first was the restoration of a Ceramic tiled kitchen floor that was really looking worse for wear. The grout lines had accumulated a lot of dirt over the years and the tiles themselves had been stained by what appeared to be plaster dust.

Ceramic Floor Tiles Before Cleaning in Sherburn in Elmet Kitchen

The second was the restoration of several window sills made from Catalan-style Terracotta. The stone had originally been covered in four to six coats of Yacht Varnish, which had left an unsightly white crusted covering. Naturally, the customer was keen to see the sills restored to their original, natural look.

Catalan Terracotta Window Sill Sherburn in Elmet Before Cleaning

Cleaning a Ceramic Tiled Kitchen Floor

After removing the kickboards from underneath the kitchen units, I used a handheld scrapper and a wire brush to manually remove most of the plaster dust. Next, I applied a solution of Tile Doctor Pro-Clean, which is a high alkaline tile and grout cleaner, across the floor.

By scrubbing the Pro-Clean into the tiles and grout I removed all the dirt and staining. As the tiles were fully glazed Ceramic, they did not need to be sealed.

Ceramic Floor Tiles After Cleaning in Sherburn in Elmet Kitchen

Cleaning and Sealing Terracotta Window Sills

The white crusted powder covering the Catalan Terracotta window sills was caused by Yacht Varnish, which would need to be removed before I could properly clean the stone below. I removed it using a combination of Tile Doctor Remove and Go, which is a heavy-duty stripper, and Tile Doctor NanoTech HBU, a powerful cleaner which uses nano-sized particles penetrates difficult-to-reach areas. Together they make a powerful stripper/cleaning solution.

This solution was left to work its magic for two hours, before I applied a handheld scrapper and wire brush to remove the white coating. Next, I rinsed the sills with water and then deep cleaned them again with Tile Doctor Pro-Clean.

The window sills were subsequently left to dry off completely overnight. I popped back to the property the next day to seal them with two coats of Tile Doctor Colour Grow, an impregnating sealer which intensified the natural shades in the stone and provided a natural-looking matte finish.

Catalan Terracotta Window Sill Sherburn in Elmet After Cleaning

Two quick jobs completed to a high standard and one very satisfied customer.
 
 

Professional Tile Cleaning and Sealing for a Ceramic Tiled Kitchen Floor Restoration and Terracotta Window Sill Restoration in Leeds



Source link

Ex Pub Quarry Tiled Floor Restored to Fantastic Condition in Newbold-on-Avon, Rugby


Pubs have been though a decline in the last ten years with one in five closing due to increased business rates and some believe the ban on smoking has had a part to play. My client saw this particular pub come up for sale in Newbold-on-Avon near Rugby and snapped it up with the intention of turning the lovely thatched Cottage back into a home. It needed a lot of work though and I was called into to sort out the floor which was a mixture of 6×6 inch and 9×9 inch Quarry tiles. The tiles were in a bit of a state and there were also large sections of concrete in 3 areas that had been painted red to blend in with the tiles.

Quarry Tiled Floor Thatched Cottage in Rugby Before Quarry Tiled Floor Thatched Cottage in Rugby Before

Rebuilding and Cleaning a Quarry Tiled Floor

The customer wanted the Quarry tiled floor restoring and extended throughout the floor which meant a substantial amount of work would be required to remove the concrete, rebuild the foundation and level with screed and then fit around 100 reclaimed tiles not to mention cleaning and sealing.

Quarry Tiled Floor Thatched Cottage in Rugby During Rebuild Quarry Tiled Floor Thatched Cottage in Rugby During Rebuild

The work was hard going at times, especially knocking out the concrete and adding the screed surface to the right level. Once that was done worked moved quickly on to laying the new tiles and grouting them in. Overall it took three days just to rebuild the floor alone.

Quarry Tiled Floor Thatched Cottage in Rugby During Rebuild Quarry Tiled Floor Thatched Cottage in Rugby During Rebuild

The customer did not what the Floor to look too different between the old and new so once the tiling was done the whole floor was treated with Tile Doctor Remove and Go to remove traces of red paint and glue. The solution was scrubbed in using a rotary machine fitted with a scrubbing pad and then rinsed off with water and then extracted using a wet vacuum.

This improved the look of the tiles but it also revealed some grout haze issues on the original tiles and after digging up the floor earlier I was aware no damp proof course had been installed which is not unusual in these older properties. To counter the grout haze and deal with any potential efflorescence issues I gave the whole floor an acid wash with Tile Doctor Grout Clean-up which was scrubbed in and then rinsed off with water and extracted with a the wet vacuum. The tiles need to be dry in order to be sealed so I left the floor for 24 hours with a number of industrial Air Movers in place to aid the drying process.

Sealing a Quarry Tiled Floor

Upon my return to the house I checked for any dampness that could have damaged the performance of the sealer, thankfully, the floor was dry and ready to seal, and so I proceeded to apply several coats of Tile Doctor Seal & Go Extra.

Seal & Go Extra is a fully breathable sealer that allows for effective moisture transmission, important where no damp proof course is installed. The sealer provides durable surface protection against dirt and stains, and is suitable for most kinds of internal, natural stone tiled floors, including Quarry, Victorian and Flagstone.

Quarry Tiled Floor Thatched Cottage in Rugby After Quarry Tiled Floor Thatched Cottage in Rugby After

The job took a week in total and as you can see from the photographs I successfully managed to restore the old tiles which with the addition of the cleaning and sealing have blended in well with the new tiles.
 
 

Quarry Tiled Floor Restoration in Warwickshire



Source link

Neglected Egyptian Marble Patio Transformed in Bozeat


Patios are particularly difficult to keep clean as they are continuously exposed to the elements fortunately Tile Doctor specialises in cleaning and restoring all different types of natural stone internal and external.

I was recently asked to restore a patio at a house in Bozeat, a village in Northamptonshire. The patio was consisted of both floor tiles and walls, and was made of a rather uncommon stone: Egyptian-style Marble.

Stained Patio Wall Before Cleaning

The customer had clearly taken pride in the presentation and aesthetic of his garden but, having a concentrated on other projects for the past couple of years, he had neglected to preserve the condition of patio. Making matters worse, the patio had never been sealed, and this had allowed dirt and moss to become ingrained in the stone. The customer was also concerned by a large rust mark left on the stone where old garden furniture had been sitting.

Egyptian Marble Patio Path Bozeat Before Cleaning Rust Stained Egyptian Marble Patio Bozeat Before Cleaning

Upon my first visit to the property, I carried out a test clean on a small patch of Marble using Tile Doctor Pro-Clean, which is a high-alkaline cleaner that we find particularly reliable to use on natural stone. The customer was very impressed by the sudden improvement in the condition of the test patch. I also tested a new product by the name of Tile Doctor Rust Away, which is a non-acidic rust remover. Amazingly, the product helped to reduce the rust stain by about 90%.

The full restoration was booked in to take place within a fortnight.

Cleaning an Egyptian Marble Patio

The first part of the restoration involved cleaning the entire patio with Pro Clean, although I worked one small section at a time. The product was worked into the stone using a black scrubbing pad fitted to a rotary machine. The resulting slurry was rinsed away using a Honda Petrol jet washer and a spinning tool, leaving the patio clear of most of the dirty, algae and moss.

Next, I treated the entire rust stain with Rust Away. The product was scrubbed in using a handheld brush and left to dwell for a few minutes, before I rinsed the area with the jet washer and spinning tool. The stone had a matte finish, but to remove the deeper staining, I needed to use a set of three diamond-encrusted burnishing pads, which we typically use for polishing stone and removing light scratches and marks.

Sealing an Egyptian Marble Patio

Luckily, the weather proved to be good, so I could return to the property the following day to seal the patio, including the walls, with Tile Doctor Ultra-Seal, which is an impregnating, natural-look sealer designed to ensure maximum stain protection.

Egyptian Marble Patio Bozeat After Cleaning Egyptian Marble Patio Bozeat After Cleaning

The photos really do speak for themselves, showing the amazing results and transformation of the garden. I left the happy customer with some maintenance instructions to keep the appearance of stone up as it is exposed to the elements.

Egyptian Marble Patio Path Bozeat After Cleaning
 
 

Professional Restoration of an Egyptian Marble Patio in Northamptonshire



Source link

Bitumen Stained Victorian Geometric Hallway Rejuvenated in Barrow in Furness


This old Victorian tiled Hallway floor, laid in a geometric pattern, at a house in Barrow in Furness was a challenging project. The tiles were extremely dirty and also stained with Black Bitumen which has been used as an adhesive, however we have come across these sorts of problems before and so I was confident it could be resolved.

Geometric floor before Restoration Barrow in Furness Geometric floor before Restoration Barrow in Furness

Deep Cleaning an Old Victorian Tiled Floor

I roped in Heidi and my son Lewis who spent a whole day cleaning with chemicals, steam, buffing pads and unfortunately the results were far from satisfactory; the customer wasn’t happy and Heidi wasn’t happy with it either. It was clear that the black bitumen had penetrated deep into the pores of the clay and becoming so embedded that no chemical or technique we were using would shift it fully.

Geometric floor before Restoration Barrow in Furness

To top it off I had gone out earlier to tile the old mat well with matching tiles before we started the cleaning but due to the depth of the floor matt. The matt well was at least 35mm so it was clear I couldn’t use standard floor adhesive. I opted instead for a sand cement mix, similar to what the Victorians would have used originally. This filled up the depth and allowed me to tile and grout the same day, however overnight there was a bit of shrinkage and some of the new tiles settled unevenly.

Geometric floor before Milling Barrow in Furness

I racked my head for a solution to both issues and decided the best course of action would be to Mill the clay tiles to remove the Bitumen and smooth down the uneven effect of my tiling. This is not something we would normally do on a clay tile as this system can leave scratches which potentially would look worse that the dirt. After I had milled the Tiles down with a course pad fitted to a heavy buffing machine and removed all the issues I then counteracted any scratches left over using a higher grit milling pad. This solution fully resolved both issues leaving it ready for the final step of sealing.

Geometric floor After Milling Barrow in Furness

Sealing an Original Victorian Tiled Floor

The floor was left to dry off overnight and we returned the next day to seal the tiles using Tile Doctor Colour Grow, which is a matt finish, fully breathable and colour enhancing sealer which really lifts the colour of the stone or in this case clay tile. Colour Grow is impregnating – meaning that it penetrates the pores of the stone to fill them and prevent trapped dirt and stains. We recommend Colour Grow for both internal and external applications and especially for areas where no damp proof membrane is evident, since the sealer allows for the floor to breathe moisture.

Geometric floor After Restoration Barrow in Furness Geometric floor After Restoration Barrow in Furness

There were plenty of problems to overcome and It took a lot of work but I’m pleased to say the floor was transformed by our efforts and now looks fantastic and I’m sure has added a lot of value to this period property.
 
 

Hallway Restoration of Bitumen-Stained Victorian Floor in Barrow in Furness



Source link

Old Flagstone Tiled Kitchen Floor Renovated at a Stacksteads Cottage near Backup


The pictures below were taken in the Kitchen of a charming cottage situated in the village of Stacksteads near the town of Backup, North of Manchester in the district of Rossendale. The flagstone floor was over 100 years old and the customer was unhappy with their appearance. They had tried to clean/mill and seal themselves a few years ago and had found the process hard work and very time consuming. This time round they decided to ask professional applicator at Tile Doctor for help.

Old Flagstone Tiled Kitchen Floor Before Renovation in Stacksteads Backup

We had conducted a small patch test so we could show possible results to the customer. They had also advised us that they felt the stained areas of grout was beyond cleaning and would probably need replacing. However replacing the grout would have been quite an expensive option so instead of replacing we suggested deep cleaning the grout lines during the renovation process.

Old Flagstone Tiled Kitchen Floor Before Renovation in Stacksteads Backup

The customers were happy with the results of the patch test so the job was booked in.

Deep Cleaning Old Flagstone Flooring

On our return visit we set about deep cleaning the flagstones using a strong dilution Tile Doctor Pro-Clean worked in using a Black Scrubbing pad fitter to a rotary cleaning machine. This action certainly gave the floor a good clean and removed the old sealer but some stains were proving stubborn to shift so we tried a stronger product called Remove and Go combined 50/50 with NanoTech HBU which add nano-sized abrasive particles to the mix.

We left the resulting formula to soak into the stone for a while and then scrubbed it into the floor with a stiff brush paying particular attention to the grout lines. This did the trick and so we then removed the now soiled and dirty cleaning products with a wet vacuum and washed down the floor with clean water to remove any trace of product and neutralise the floor before sealing. We then left for the evening so the floor could dry out fully overnight.

Old Flagstone Tiled Kitchen Floor During Renovation in Stacksteads Backup

Sealing a Flagstone Tiled Kitchen Floor

We came back the next day and tested the floor with a damp meter in a few different locations to make sure no dampness remained in the stone. The Flagstone was dry so we proceeded to seal the floor with a couple of coats of Tile Doctor Colour Grow which penetrates into the pores of the stone protecting it from within and enhancing the natural colours of the stone.

Old Flagstone Tiled Kitchen Floor After Renovation in Stacksteads Backup

The beautiful colours of blue and dark sand were showing after sealing with Colour Grow which is the best sealer for stone floors. Certainly the customer was very happy with the results and left the following 5 star review!

We could not praise Kamila enough. Our flagstone floor was in desperate need of some TLC. She was punctual, thorough and completely professional. Throughout the whole process she invited me to see the progress and to keep me informed of what she was doing. She also gave us good advice on how to clean and care for our stone floor. The end result is fabulous and we are absolutely delighted. We would definitely recommend Kamila to anyone.
Jo H, Bacup

Old Flagstone Tiled Kitchen Floor After Renovation in Stacksteads Backup
 
 

Old Flagstone Kitchen Floor Cleaned and Sealed in South Lancashire



Source link

Original Victorian Tiles Restored to Top Condition in Brighton


The 19th century was a pivotal period for the Brighton and Hove area of East Sussex. Many of the major attractions were built during the Victorian era, including two of the major piers. Over time, Brighton became not just a very popular destination for day trippers, but also for home makers. Lots of Victorian-style houses were built, complete with Victorian-style tiled floors.

Modern homeowners are increasingly uncovering these original Victorian tiles after decades of being hidden under carpet overlay. Contrary to popular belief, it is very much possible to restore these tiles back to peak condition despite suffering from damage, dirt and staining.

Victorian Tiled Hallway Floor Before Restoration Hove

I recently a house in Brighton to prove just that. The customer’s Victorian tiled hallway floor had been covered by many carpets over the past few decades and so there were many thick glue deposits, along with a heavy build-up of dirt and staining.

Victorian Tiled Hallway Floor Before Restoration Hove

Cleaning an Original Victorian Tiled Hallway

After protecting the woodwork with tape, I set about cleaning the Victorian tiles using a combination of products. One of these was Tile Doctor NanoTech HBU (HBU = Heavy Build-Up Remove), a powerful cleaner which uses nano-sized cleaning particles to penetrate deep into the tile to lift out and dissolve ingrained dirt and stains. I mixed the NanoTech HBU together 50:50 with Tile Doctor Pro-Clean, a reliable alkaline-based cleaner. This cleaning mixture was applied to the hallway floor and then covered with a plastic sheet for a few hours before being scrubbed into the tiles thoroughly with a lot of elbow grease and a specialised scrubbing pad.

Victorian Tiled Hallway Floor During Restoration Hove

A lot of the glue deposits were stubborn and would not respond to the chemical cleaning, so I needed to carefully scrape these off by hand. Once the majority of the glue had been removed I applied a set of diamond-encrusted burnishing pads to remove the top layer to resurface the floor and bring back a lot of the definition in the tile.

Victorian Tiled Hallway Floor During Restoration Hove

Sealing an Original Victorian Tiled Hallway

After completing the cleaning process, I left the floor to dry completely. Giving the tiles enough time to dry is important, especially in older properties which won’t have a damp-proof membrane installed. Even a small amount of excess moisture can cloud the sealer and damage its performance.

Once I was satisfied with the moisture level, I proceeded to seal the tiles using numerous coats of Tile Doctor Seal and Go which is a water based sealer that doesn’t leave a smell as it dries and as well as adding a layer of protection to the tiles give an appealing low-sheen finish.

Victorian Tiled Hallway Floor After Restoration Hove

The client, being of French nationality, said she was “sur la lune” (over the moon) with the result! Look at the photos below to see the transformation – I must say I was quite pleased myself!

Victorian Tiled Hallway Floor After Restoration Hove
 
 

Professional Tile Cleaning and Sealing for an Original Victorian Tiled Floor Restoration in Brighton



Source link

Mould-Covered Porcelain Shower Tiles Refreshed in Didcot


Available in a variety of styles and designs Porcelain tiles are harder than normal Ceramic tiles and are known for their durability and water resistance, making them ideal for use in shower cubicles and bathrooms.

However, as I’m sure most people already know, shower tiles are not the easiest to keep clean and fresh. These tiles are exposed daily to a multitude of acidic soaps and shampoo dyes, and if proper precaution is not taken to rinse away the excess after using the shower, mould will grow very quickly on the grout.

This shower cubicle, constructed from Porcelain tiles, is a typical example of this. As you can see from the photo below, the mould problem was very apparent. I was asked by the property owner, who lives in Didcot, a railway town in South Oxfordshire, to refresh it after what must have been years of neglect. Here’s how I did it.

Porcelain Shower Before Renovation in Didcot

Cleaning a Porcelain Tiled Shower Cubicle

The first process in restoring this shower cubicle was to spray the walls with Tile Doctor Duo Clean, which is both a grout cleaner and a mould remover. I left it to dwell for 45 minutes, before proceeding to scrubbing into the grout with a stiff brush. I worked in sections, spraying more Duo Clean onto the tiles as I moved along the length of the walls.

Following this, I rinsed the entire cubicle with fresh water to remove any traces of chemicals and used my wet-vac machine to dry it quickly. The next process was to remove the old, mouldy silicone and replace it with fresh silicone.

Sealing a Porcelain Tiled Shower Cubicle

With the shower cubicle now fresh and clean, it was now time for me to seal the grout and tiles.

I did this using Tile Doctor Wall Grout Sealer Spray, which is a water-based grout sealer that prevents oil, water and acid-based contaminants – including soaps and shampoos – from spoiling the appearance and colour of grout. It does this while allowing for moisture vapour transmission.

Check out the photo below – you can see that after a short day’s work, the appearance of the cubicle has been completely transformed. The customer was very pleased with the result and the addition of the sealer will ensure it stays this way for some time to come.

Porcelain Shower After Renovation in Didcot
 
 

Professional Porcelain Tiled Shower Cubicle Renovation in Didcot



Source link

Traditional Terracotta Kitchen Floor Renovated in Welwyn Garden City


The pictures below were taken at a beautiful Hertfordshire Lodge located on the outskirts of Welwyn Garden City where the traditional Terracotta Kitchen floor had lost its appeal and was now in need of renovation.

Welwyn Garden City is actually a new town that was created in the 1920 with an aim to create a modern garden city, the architecture is therefore fairly modern.

Terracotta Lodge Floor Tile Before Cleaning in Welwyn Garden City

Deep Cleaning Kitchen Terracotta Tiles

As usual the first step before starting the cleaning process was to clear the floor of as move furniture as practical and use protective tape to cover the threshold edges, skirting’s and doors and use a protective sheet to the fixed kitchen units.

To deep clean the Terracotta tiles and remove any trace of old sealers and waxes present a strong dilution of Tile Doctor Remove and Go was applied to the floor and left to soak in for about ten minutes. Then the solution was agitated using detail brushes along the grout lines and edges and polypropylene pads.

Once done the now soiled cleaning solution was extracted from the floor using a wet vacuum and the tile and grout rinsed with fresh water.

This process removed most of the dirt and old coatings but more work was required so a further treatment using a strong dilution of Tile Doctor Pro-Clean which is a strong tile cleaner and sealer remove was applied and worked in using an orbital floor machine fitted with a scrubbing pad.

Again the soiled cleaning solution was removed using a wet vacuum and the tile and grout given a steam clean to remove any trace of cleaning product residue. The floor was then left for two days to fully dry out.

Sealing Terracotta Kitchen Tiles

On our return the floor was checked for dampness before we proceeded to seal the floor; sealing damp tiles can result in a patchy finish so this is always worth checking.

To seal we gave the Terracotta tiles a primer coat of Tile Doctor Colour Grow which is an impregnating sealer that brings out the natural colours in the tile and by occupying the pores of the clay tile it stops dirt becoming ingrained. This was then followed by six coats of Tile Doctor Seal and Go which works really well on Terracotta and adds a nice satin sheen finish. The floor now looks much healthier and has really lifted the appearance of the kitchen.

Terracotta Lodge Floor Tile After Cleaning in Welwyn Garden City

Before leaving we advised the customer to avoid commercial acid based cleaning products as these are not appropriate for sealed Terracotta tiles. We suggest using a low alkaline/neutral PH product such as Tile Doctor Neutral Tile Cleaner as this will maximise the life of the sealer and maintain the sheen of the tile.
 
 

Traditional Terracotta in the Kitchen Restored in Welwyn Garden City



Source link

Cleaning a Sandstone Fireplace and Victorian Floor Tiles Preston


We often get asked to do a combination of jobs at Tile Doctor so we have to be prepared for the unexpected, like getting asked to clean an old Sandstone fireplace whilst your cleaning a Victorian tiled floor at a house in Preston. We normally charge extra for these types of jobs but it depends how much cleaning is required.

Red and Black Victorian Tiles Preston Before Cleaning

This Fireplace had been in use for a number of years and due to its grainy texture was hard to keep clean, dirt and soot had built up on its surface and there was no sealer visible, either that or it had worn off with the heat.

Sandstone Fireplace Preston Before Cleaning

Cleaning and Sealing a Sandstone Fireplace

To clean the uprights and Hearth I applied Tile Doctor Oxy-Gel which being in Gel form and not a liquid, stays in place increasing dwell times and doesn’t drip where it shouldn’t. In this case I let it soak into the stone for about forty minutes before scrubbing it in with a stiff hand brush and steam. Some marks were still visible after this process so we opted for using handheld Diamond blocks in 50.100.200 and then 400 grit to grind off the staining and restore the surface finish. Using these small handheld blocks takes off some of the heavier texture as well as cleaning the stone at the same time, but is really useful to use where chemicals alone struggle to get the results required. Once fully clean the fireplace was rinsed with water a couple of times and the slurry removed using a wet vacuum. After speed drying the stone with a heat gun it was ready for a couple of coats of Tile Doctor Colour Grow, even we were impressed with the results.

Sandstone Fireplace Preston After Cleaning

Cleaning and Sealing a Victorian Tiled Floor

The Red and Black Victorian Tiles were cleaned with a strong dilution of Tile Doctor Pro-Clean which is very similar to Oxy-Gel only in a liquid form. The product was left to soak into the tiles for about ten minutes before being scrubbed in with a black buffing pad attached to a slow speed buffing machine. I used the wet vacuum again to soak up the residue and stubborn stains were retreated until I was satisfied.

Old Victorian floors rarely have a damp proof membrane installed and so it’s not uncommon for damp to rise-up through the ground and tile resulting in white salt deposits being left on the surface. To prevent this process, which is commonly referred to as Efflorescence, Tile Doctor Acid Gel was applied. The solution is scrubbed into the tiles and then rinsed off with clean water and removed with a wet vacuum ready for sealing.

Victorian Tiles can take a while to dry and in this case I left it two days before returning to apply a breathable sealer to protect the tiles from ingrained dirt and staining. In this case a couple of coats of Tile Doctor Colour Grow were applied. If you recall this was the same sealer we used on the fireplace as the customer wished to bring out the colour and have a Matt finish.

Red and Black Victorian Tiles Preston After Cleaning
 
 

Professional Restoration of a Sandstone Fireplace and Victorian Floor in Lancashire



Source link

Old Yorkshire Flagstone Floor Covered in Bitumen Renovated in Sedgefield


This property in Sedgefield, County Durham, recently came under new ownership and the new owner planned several renovations including replacing the carpet in the front room. Removing the carpet was straightforward but unfortunately it had been glued down using a good layer of bitumen which left quite a mess and upon further inspection she realised there was a perfectly sound Yorkshire flagstone floor underneath.

Realising the flagstones would make an impressive floor she was keen to have them restored and spoke to a number of people including a builder who all said it would be an impossible job. Bitumen is an awful material and it was clear removing it from the stone would not be easy.

Yorkshire Flagstone Floor Covered in Bitumen Before Renovation Yorkshire Flagstone Floor Covered in Bitumen Before Renovation

Having exhausted local connections, she turned to the internet and came across details of a Victorian floor stained with Bitumen that a colleague of mine had worked on and so gave Tile Doctor a call.

Cleaning Bitumen off Yorkshire Flagstones

With a floor like this you can’t really make too many promises as to the outcome or how long it will take however we do access to a lot of experience and some very powerful cleaning products so I was confident we could improve the look of the floor significantly.

To start we carefully scrapped off as much of the black bitumen as possible which took a lot longer than I had initially thought. Next I created a strong mixture of two Tile Doctor Products Acid Gel and Nanotech HBU Remover applying it in sections to the floor like a poultice and leaving it to soak in for a while before agitating it with a rotary scrubber. Acid Gel is used to remove minerals such as salt deposits, cement and grout smears and in this case, I felt it would also help to weaken the Bitumen. Nantotech HBU is another strong product which is named after the tiny Nano sized particles it contains and HBU is an acronym for Heavy Build-Up.

Yorkshire Flagstone Floor Covered in Bitumen During Renovation Yorkshire Flagstone Floor Covered in Bitumen During Renovation

After being worked into floor it was rinsed off with water to neutralise the acid and the resultant slurry extracted using a wet vacuum. Once a section was clear we moved onto the next and repeated the process, we also spot treated any ugly spots that needed further treatment. It took about a week to complete the cleaning but using this process I’m happy to report we were able to remove about 99% of the Bitumen and the Flagstone floor was now fully visible.

Yorkshire Flagstone Floor Covered in Bitumen During Renovation

Sealing Yorkshire Stone

The floor was left to dry overnight and I returned the next day to seal the floor first checking it for dampness using a Damp Meter. The flagstones were dry so I then proceeded to seal the floor using a couple of coats of Tile Doctor Colour Grow which is a matt sealer that impregnates the pores of the stone protecting it from within whilst enhancing the natural colours of the stone.

Yorkshire Flagstone Floor Covered in Bitumen During Sealing

The owner was very pleased with the difference we had made and whilst the Yorkshire stone had been darkened by the Bitumen in places it has defiantly added a lot of character to the floor and blends in well with the rustic wood burner in the hearth.

Yorkshire Flagstone Floor Covered in Bitumen After Renovation Yorkshire Flagstone Floor Covered in Bitumen After Renovation

 
 

Restoring the Appearance of Yorkshire Flagstones in County Durham



Source link

Original Victorian Tiled Hallway Brought Back to Life at an Esher Flat


Esher is a small suburb in Surrey, situated just outside London. It was a fashionable area to live in amongst royalty and the aristocracy in the Victorian period, and during this time many buildings were built.

One such building has since been turned into a block of separate flats, and some of the flats still contain the original Victorian tiles in the hallway. I was contacted by one of these flat owners about restoring their tiles back to the best possible condition. Interestingly this customer’s tiles were part of a larger floor that had been divided between two flats.

Victorian Floor Tile Before Cleaning Esher

Cleaning Original Victorian Tiles

I began the restoration by spreading Tile Doctor Remove and Go across the entire set of tiles. Remove and Go is a heavy-duty stripper that helped to loosen and remove old glue deposits where carpet had been laid over the tile, it will also strip off old sealers and release ingrained muck.

The Remove and Go was worked into the tile and grout with a stiff brush and then the soiled solution rinsed off and extracted using a wet vacuum. I followed by this applying a coarse 200-grit diamond encrusted burnishing pad, fitted to a handheld buffer, to grind away the particularly stubborn dirt and stains to restore the appearance of the stone. Afterwards, I rinsed the tiles again with water and soaked up the resultant slurry with a wet vacuum.

I noticed that there remained several ingrained stains dotted across the floor, so to remove these I aggressively burnished the affected areas with a very coarse 50-grit handheld diamond block. This essentially removed the very top layer of the stone, taking with it the ingrained marks.

Next, I dried the area with a large blower and heat gun. Under normal circumstances, 48 hours needs to pass before the tiles can be sealed, but as this was a small area I was able to dry it very quickly. After carrying out a damp test, I determined the tiles were ready to be sealed.

Sealing Original Victorian Tiles

To seal the Victorian Tiles, I applied six coats of Tile Doctor Seal and Go sealer, which provides a high-quality sheen finish, as well as plenty of protection for the future. Tile Doctor have a range of suitable sealers available including Colour Grow which provides a matte finish – it’s just a matter of personal choice for the customer.

Victorian Floor Tile After Cleaning Esher

The outcome of the restoration was fantastic and the customer was very pleased, leaving the following testimonial.

“Promptly organised, delivered when promised. Good looking job when complete. Well done.”
 
 

Professional Tile Cleaning and Sealing for an Original Victorian Tiled Floor Restoration in Esher



Source link

Original Edwardian Tiles Refreshed and Revitalised in Lytham St Annes


We often get asked to restore original Edwardian tiles which, contrary to popular belief, are the same as Victorian tiles in their style and composition. The only discernible difference is the age of the property – whether it was built in the Victorian (1837-1901) or Edwardian period (1901-1910). As such, they can be cleaned and sealed in the same manner.

I recently visited an Edwardian period property in Lytham St Annes, a lovely coastal resort on the Lancashire coast where we have completed many restorative cleaning activities in the past. Along with its sandy beaches, the area is internationally renowned for its golf courses.

The property owner had some original Edwardian tiles which had been laid down in a vestibule and were beginning to show their age. There were several damaged tiles in the area that needed to be replaced and the entire set of tiles needed to be cleaned to achieve the best possible result.

Edwardian Tiled Floor Before Cleaning in Lytham

Cleaning Original Edwardian Tiles

To begin I needed to address the issue of the damaged tiles, fortunately we are always on the lookout for old tiles and have quite a collection we can choose from, were also in touch with a number of companies that still make these tiles and so are able to source replacements one way or another.

Edwardian Tiled Floor During Tile Repair in Lytham

I was therefore able to replace the broken and damaged tiles with suitable replacements that matched well with the original pattern of the floor. They were fixed in place and then once the adhesive had hardened grouted in using a matching grout.

Following this, I applied Tile Doctor Oxy-Gel to the remaining area taking care not to disturb the newly laid tiles. Based on the popular Pro-Clean product, Oxy-Gel is a strong alkaline cleaning product that breaks down dirt and grime and is safe to use on tiles however being in gel form and not liquid it stays where put, which was important the grout was still drying in the repaired area.

Edwardian Tiled Floor Before Cleaning in Lytham

The Oxy-Gel was left to dwell for roughly 30 minutes before scrubbing it in with a stiff hand brush. to the tiles. I carefully rinsed away the resulting slurry and then treated the area with Tile Doctor Acid Gel, which is a blend of phosphoric and hydrochloric acids in gel form. By applying the product, I could reduce the grout haze and efflorescence problems that occur in old properties like this.

Edwardian Tiled Floor During Cleaning in Lytham

Next, I carefully rinsed the floor again with water and soaked up the moisture with a wet vacuum, before leaving it to fully dry out overnight.

Sealing Original Edwardian Tiles

I returned to the property the next day with the intention of sealing the tiles; fortunately, the weather was good and after taking a couple of damp readings I was happy the tiles were completely dry. We must be careful with older buildings which don’t have a damp proof membrane fitted; if there is even a moderate amount of damp present it can cloud the sealer and damage its performance.

I started the sealing process with a single coat of Tile Doctor Colour Grow, which is an impregnating, colour-enhancing sealer that improves the look of the tile as well as adding internal protection. Assisted with a fan to speed up the drying time, this was followed by several coats of Tile Doctor Seal and Go, which is a topical sealer that add further protection and the high-quality sheen finish the customer requested.

Edwardian Tiled Floor After Cleaning in Lytham

The customer was thrilled with the result and very pleased that she could salvage these fantastic original tiles. Another satisfied customer.

Edwardian Tiled Floor After Cleaning in Lytham
 
 

Professional Restoration of an Original Edwardian Tiled Vestibule in the Fylde District



Source link

Ruined Marble Shower Tiles Restored in Sharnbrook


I was contacted by the owner of a cleaning company in Milton Keynes, after an end of tenancy clean at a house in Sharnbrook went wrong. Unfortunately a member of their staff had incorrectly applied an acid based cleaning product to the Marble shower tiles which like most natural stone is acid sensitive. The cleaning product had etched the stone causing the damage you can see below. Being a reputable company they were determined to put the situation right and we were asked to step in.

Marble Shower Cubicle Before Cleaning in Sharnbrook

We have had a few issues of this type before where customers keen to remove unsightly Limescale marks from their stone tiles use a household cleaner without reading the bottle label first to see if it’s safe to use. Issues of this nature on Marble cannot be easily resolved with chemical products; it takes specialist knowledge and equipment.

Marble Shower Cubicle Before Cleaning in Sharnbrook

The quote was given and accepted and the work was booked in with the letting company for a few weeks later.

Cleaning and Polishing a Marble Shower Cubicle

The first photos show the extent of the damage which had not only damaged the immediate area but as the cleaning product was in liquid form it had ran down the wall had totally ruined the surface of the tiles in the lower half of the shower.

The first thing I did was to protect the shower tray with towels and then began assembling the equipment needed for this job which consisted of a wet polisher, a variable speed polisher, one set of 6” Tile Doctor burnishing pads from 100 grit to 3,000 grit and one full set of diamond blocks from 80 grit upwards.

I then went about testing how far down the scale I would have to go to get the best results. I found that in most areas the application of a 200 grit burnishing pad was adequate to resurface the tile and remove damage but in some areas I had to go down the scale as low as 80 grit to achieve the desired result.

Marble Shower Cubicle During Cleaning in Sharnbrook

One the damage had been removed the higher grit pads are used in sequence to restore the polish finishing with the 3,000 grit pad. No chemicals are used in this process, just water and the small six inch diamond encrusted burnishing pads which fit to a hand buffer.

Although only a small area, no more than 4 m2 this job took most of the day. However, as the whole shower room was tiled in the same tiles it was a much more cost effective to restore the damaged tiles than replace them.

Marble Shower Cubicle After Cleaning in Sharnbrook

We were able to achieve an excellent result which the client was very happy with, no doubt saving the cleaning company thousands of pounds in replacement costs.

Marble Shower Cubicle After Cleaning in Sharnbrook
 
 

Professional Restoration of a Damaged Marble Tiled Shower Cubicle in Bedfordshire



Source link